skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Subsurface Imaging in Urban Areas With Ambient Noise Using DAS and Seismometer Data Sets: Granada, Spain
Abstract Distributed acoustic sensing (DAS) is an innovative technology with great potential for acquiring seismic data sets in urban areas. In this work, we check the suitability of a DAS data set acquired in Granada (Spain) for retrieving subsurface reflectivity from ambient noise. The fiber‐optic is a pre‐existing underground telecommunication cable that crosses the city from Northwest to Southeast. We use a 10 hr recording of strain rate from a 2020 experiment to obtain seismic reflections using the autocorrelation method. We compare the DAS results with reflections obtained from seismic ambient noise recorded in nine seismometers deployed close to the fiber‐cable for 7 days in November 2022. The novel approach proposed in this study for the identification of the reflections is to use autocorrelations after bandpass filtering for specific central frequencies and to check the stability of the signals over a broad frequency band. Microtremor Horizontal to Vertical Spectral Ratio (MHVSR) measurements at a total of 14 stations, five of them outside the city, help to constrain the reflection interpretation. These include one station at the borehole that reaches the basement in the Granada Basin crossing all the Cenozoic units. We use the legacy sonic log to obtain a relationship between frequencies of MHVSR peaks and depth. Autocorrelation and MHVSR methods give consistent results delineating bedrock depth deeper than 1,000 m in Granada. These results confirm that DAS can provide valuable subsurface information in urban areas.  more » « less
Award ID(s):
2022716
PAR ID:
10647237
Author(s) / Creator(s):
 ;  ;  ;  ;  ;  ;  ;  ;  
Publisher / Repository:
Wiley
Date Published:
Journal Name:
Journal of Geophysical Research: Solid Earth
Volume:
129
Issue:
11
ISSN:
2169-9313
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; (, Bulletin of the Seismological Society of America)
    ABSTRACT Distributed acoustic sensing (DAS) technology is an emerging field of seismic sensing that enables recording ambient noise seismic data along the entire length of a fiber-optic cable at meter-scale resolution. Such a dense spatial resolution of recordings over long distances has not been possible using traditional methods because of limited hardware resources and logistical concerns in an urban environment. The low spatial resolution of traditional passive seismic acquisition techniques has limited the accuracy of the previously generated velocity profiles in many important urban regions, including the Reno-area basin, to the top 100 m of the underlying subsurface. Applying the method of seismic interferometry to ambient noise strain rate data obtained from a dark-fiber cable allows for generating noise cross correlations, which can be used to infer shallow and deep subsurface properties and basin geometry. We gathered DAS ambient noise seismic data for this study using a 12 km portion of a dark-fiber line in Reno, Nevada. We used gathered data to generate and invert dispersion curves to estimate the near-surface shear-wave velocity structure. Comparing the generated velocity profiles with previous regional studies shows good agreement in determining the average depth to bedrock and velocity variations in the analyzed domain. A synthetic experiment is also performed to verify the proposed framework further and better understand the effect of the infrastructural cover along the cable. The results obtained from this research provide insight into the application of DAS using dark-fiber lines in subsurface characterization in urban environments. It also discusses the potential effects of the conduit that covers such permanent fiber installations on the produced inversion results. 
    more » « less
  2. ; ; ; ; (, Geophysical Journal International)
    SUMMARY The Granada Basin in southeast Spain is an area of moderate seismicity. Yet, it hosts some of the highest seismic hazards in the Iberian Peninsula due to the presence of shallow soft sediments amplifying local ground motion. In urban areas, seismic measurements often suffer from sparse instrumentation. An enticing alternative to conventional seismometers is the distributed acoustic sensing (DAS) technology that can convert fibre-optic telecommunication cables into dense arrays of seismic sensors. In this study, we perform a shallow structure analysis using the ambient seismic field interferometry method. We conduct a DAS array field test in the city of Granada on the 26 and 27 August 2020, using a telecommunication fibre. In addition to the existing limitations of using DAS with unknown fibre-ground coupling conditions, the complex geometry of the fibre and limited data recording duration further challenge the extraction of surface-wave information from the ambient seismic field in such an urban environment. Therefore, we develop a processing scheme that incorporates a frequency–wavenumber (f−k) filter to enhance the quality of the virtual shot gathers and related multimode dispersion images. We are able to use this data set to generate several shear-wave velocity (VS) profiles for different sections of the cable. The shallow VS structure shows a good agreement with different geological conditions of soil deposits. This study demonstrates that DAS could provide insights into soil characterization and seismic microzonation in urban areas. In addition, the results contribute to a better understanding of local site response to ground motion. 
    more » « less
  3. ; ; ; (, Journal of Geophysical Research: Solid Earth)
    Abstract Fault zone complexities contain important information about factors controlling earthquake dynamic rupture. High‐resolution fault zone imaging requires high‐quality data from dense arrays and new seismic imaging techniques that can utilize large portions of recorded waveforms. Recently, the emerging Distributed Acoustic Sensing (DAS) technique has enabled near‐surface imaging by utilizing existing telecommunication infrastructure and anthropogenic noise sources. With dense sensors at several meters' spacing, the unaliased wavefield can provide unprecedented details for fault zones. In this work, we use a DAS array converted from a 10‐km underground fiber‐optic cable across Ridgecrest City, California. We report clear acausal and coda signals in ambient noise cross‐correlations caused by surface‐to‐surface wave scattering. We use these scattering‐related waves to locate and characterize potential faults. The mapped fault locations are generally consistent with those in the United States Geological Survey Quaternary Fault database of the United States but are more accurate than the extrapolated ones. We also use waveform modeling to infer that a 35 m wide, 90 m deep fault with 30% velocity reduction can best fit the observed scattered coda waves for one of the identified fault zones. These findings demonstrate the potential of DAS for passive imaging of fine‐scale faults in an urban environment. 
    more » « less
  4. ; ; ; ; (, Seismological Research Letters)
    Abstract This article documents a comprehensive subsurface imaging experiment using seismic waves in a well-studied outdoor laboratory at Newberry, Florida, which is known for significant spatial variability, karstic voids, and underground anomalies. The experiment used approximately two kilometers of distributed acoustic sensing (DAS) fiber-optic cable, forming a dense 2D array of 1920 horizontal-component channels, and a 2D array of 144 SmartSolo three-component nodal seismometers, to sense active-source and passive-wavefield seismic waves. The active-source data were generated using a powerful, triaxial vibroseis shaker truck (T-Rex) and impact sources (accelerated weight drop and an eight-pound sledgehammer) that were simultaneously recorded by both the DAS and nodal seismometers. The vibroseis truck was used to excite the ground in three directions (two horizontal and one vertical) at 260 locations inside and outside the instrumented array, whereas the impact sources were used at 268 locations within the instrumented array. The passive-wavefield data recorded using the nodal seismometers comprised 48 hr of ambient noise collected over a period of four days in four 12-hour time blocks, whereas the passive wavefield data collected using DAS consisted of four hours of ambient noise recordings. This article aims to provide a comprehensive overview of the testing site, experiment layout, the DAS and nodal seismometer acquisition parameters, and implemented raw data processing steps. Although potential use cases, such as surface-wave testing, full-waveform inversion, and ambient noise tomography, are discussed relative to example data, the focus of this article is on documenting this unique data set and presenting its initial data quality rather than on generating subsurface imaging results. The raw and processed data, along with detailed documentation of the experiment and Python tools to aid in visualizing the DAS data set, have been made publicly available. 
    more » « less
  5. ; ; (, Seismica)
    Seismic imaging and monitoring of the near-surface structure are crucial for the sustainable development of urban areas. However, standard seismic surveys based on cabled or autonomous geophone arrays are expensive and hard to adapt to noisy metropolitan environments. Distributed acoustic sensing (DAS) with pre-existing telecom fiber optic cables, together with seismic ambient noise interferometry, have the potential to fulfill this gap. However, a detailed noise wavefield characterization is needed before retrievingcoherent waves from chaotic noise sources. We analyze local seismic ambient noise by tracking five-month changes in signal-to-noise ratio (SNR) of Rayleigh surface wave estimated from traffic noise recorded by DAS along the straight university campus busy road. We apply the seismic interferometry method to the 800 m long part of the Penn State Fiber-Optic For Environment Sensing (FORESEE) array. We evaluate the 160 virtual shot gathers (VSGs) by determining the SNR using the slant-stack technique. We observe strong SNR variations in time and space. We notice higher SNR for virtual source points close to road obstacles. The spatial noise distribution confirms that noise energy focuses mainly on bumps and utility holes. We also see the destructive impact of precipitation, pedestrian traffic, and traffic along main intersections on VSGs. A similar processing workflow can be applied to various straight roadside fiber optic arrays in metropolitan areas. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email