skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


This content will become publicly available on September 13, 2026

Title: Post-wildfire soil hydrophobicity and slope erosion remediation by applying environmentally friendly modifiers
This paper investigates the use of environmentally friendly remediation materials and techniques for rain-induced post-wildfire soil erosion on burned slopes. During wildfires, vegetation and organic matter combust and release hydrophobic chemicals on soil grains. Hydrophobicity reduces the water infiltration rate, prolongs the wetting process, increases erosion, and causes severe debris flows over watersheds. This comparative study presents the most effective approaches for mitigating hydrophobicity effects through environmentally friendly biopolymers and surfactants. Experimental techniques evaluate the dynamics of water drop penetration into treated and untreated soil, downhill water drop mobility, and erosion. The waterdrop contact angle measurements indicate that biopolymer Xanthan Gum (XG) slightly reduces hydrophobicity, whereas surfactant Sodium Cocoyl Isethionate (SCI) reduces it by a factor of a thousand. In addition, SCI can decrease slope erosion at low-inclined and moderate-inclined slopes. Sands' infiltration rates (IR) are very fast due to high permeability in normal conditions; however, surface hydrophobicity significantly reduces IR. Results from artificially treated extremely water-repellent samples of mixed sand show a six orders of magnitude decrease in IR. Then, after treatments XG and SCI modifiers, the IR increased by an order of magnitude after the XG treatments, and by four orders of magnitude under SCI treatment. Although XG is wettable and attractive to water, the crust and webs it forms between sand particles prevent effective water infiltration. Mild slopes exhibit similar IR rates as horizontal surfaces for all the cases; however, steeper slopes reduce IR for treated hydrophobic soils because they allow for downhill motion of water that is faster relative to the infiltration speed.  more » « less
Award ID(s):
2238331 2025643
PAR ID:
10647544
Author(s) / Creator(s):
; ; ; ; ;
Publisher / Repository:
Elsevier
Date Published:
Journal Name:
Geomechanics for energy and the environment
ISSN:
2352-3808
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; (, Advances in Civil Engineering)
    Tang, Qiang (Ed.)
    As an environmentally friendly technology, microbially induced calcite precipitation (MICP) is widely used to improve the engineering properties of soil. The goal of this study was to investigate the effect of rainfall-induced erosion on the stability of sandy slopes which were treated by MICP technology. The observation of the erosion pattern of low concentration (0.25 M Ca) and high concentration (0.5 M Ca) of MICP-treated slopes, the mechanical behaviors of MICP-treated and cement-treated samples, and the effects of rainfall-induced erosion on the roughness of 0.5 M Ca MICP-treated and 10% cement-treated slope were studied through visual observation, unconfined compressive tests, and roughness tests. For the 0.25 M Ca MICP-treated sample, surface erosion was found to occur soon after the start of the rainfall erosion test, while for the 0.5 M Ca MICP-treated sample, the slope surface remained intact after exposing to the rainfall for 24 hours. Through unconfined compressive tests, it can be concluded that the 0.5 M Ca MICP treatment achieved a high strength, which was similar to 10% cement-treated sand. The roughness test results showed that the surface of 0.5 M Ca MICP-treated slope looked smoother than the uneroded surface after 24-h rainfall-induced erosion. On the contrary, the surface of the 10% cement-treated slope became rougher after 24-h rainfall-induced erosion. These results indicated that the MICP-treated sandy slope had lower resistance against rainfall-induced erosion compared to the cement-treated sandy slope. 
    more » « less
  2. ; ; ; ; (, International Journal of Geotechnical Engineering)
    na (Ed.)
    Applying organo-silanes (OS) as water-repellent additives can enhance soil properties, crucial for use as moisture barriers in infrastructures like roads, landfills, and tunnels. This study used four soil samples and glass beads, treated with three OS products at dosages from 1:1 to 1:1000. Laboratory tests included contact angle, water drop penetration, and breakthrough pressure on 216 samples. Results showed increased hydrophobicity with higher OS dosages, with contact angles over 110° and Water Drop Penetration Test times above 3600s. However, effectiveness plateaued at certain dosages, indicated by electrical conductivity and pH changes. The primary factors (94.6% influence) were soil type, OS product, dosage, and drying condition, while reaction time, and leaching/washing had a minor impact (5.4%). Treated soils could sustain a hydrostatic head of up to 17 kPa. These insights aid in optimizing water-repellency treatments for soil performance and infrastructure durability in geotechnical applications. 
    more » « less
  3. ; (, Environmental Geotechnics)
    This paper investigates internal structure-driven density changes of post-wildfire and natural debris flows resulting from sand hydrophobicity and shearing. Hydrophobic sand particles entrap air by way of an armoured bubble/gas marble mechanism in water. Although individual armoured bubbles have already been broadly investigated, the effects of fluid drag and collisions in multiphase water–air–sand mixtures remain largely unexplored. The armoured bubbles’ stability in water depends on the force balance on the air bubble–particle boundary, which largely defines the mixture’s internal structure. Gravity, relative armoured bubble and fluid velocities govern the collision forces, local changes in mixture concentration, and the separation or attachment of hydrophobic particles to air bubbles in water. The initially large entrapped air volume decreases due to degassing and large armoured bubble breakdowns downstream. Experimental and theoretical approaches quantify the air entrapment under different sand-water volumetric concentrations, as well as the effects of mixing speed, duration, and sand particle size on the final mixture’s internal structure. Since hydrophobic sand particles can effectively entrap many air bubbles in the final debris flow-like mixture, the densities of debris flows that sweep over hydrophobic soil will accordingly reduce. Therefore, this paper proposes empirical estimates of density reductions resulting from air entrapment. 
    more » « less
  4. (, 10th International Conference on Soil Erosion and Scour)
    One of the principal side effects of wildland fire extreme events is mass soil erosion event of the soil and slopes denuded by the fire. These soil erosion events may be devastating and extreme in their own rights, damaging critical infrastructure downslope or downstream of the fire burn scars. While there are many variables influencing the severity of post fire erosion, the amounts of soil erosion are largely dependent on the water content of the soil at the time of the fire coupled with the fire intensity. Fires that are lower intensity or soils that are “wet” at time of burning have significantly less damage to root structures of grasses and other plants while showing lessened soil erosion potential. Fires that are higher intensity or on dry soils have higher damages to root structures and increased soil erosion potential. In this laboratory study, a single clayey sand soil material common to the ground surface across the Black Hills of South Dakota and Wyoming is studied for erosion potential after burning in a controlled container burn. This material is varied by initial water content and burned at a soil surface temperature of 800 Celsius for 75 minutes, a temperature-time continuum consistent with severe wildland fire. Burning is used rather than kilns to preserve the same atmospheric conditions as in the field fire event. A laboratory soil-erosion device is then used to measure soil erosion potential across a range of fluid velocities and soil slopes. The results of this study show that the initial water content of the soil at the time of fire is a key parameter in understanding soil erosion potential post-fire. While not a complete study on time-temperature-water content across many soil types, this pilot research shows promise for future models and mapping tools. These future tools will enable planners to target resources for post wildfire erosion mitigation based on surficial soil water content at the time of the fire. 
    more » « less
  5. ; ; ; ; (, ASME Journal of Heat and Mass Transfer)
    Abstract An experimental apparatus was designed to study the impacts of wettability on evaporation of water from Ottawa sand. Evaporation rates were measured for: (1) a 5.7-cm-thick layer of hydrophilic Ottawa sand; (2) a 5.7-cm-thick layer with 12% hydrophobic content, consisting of a 0.7-cm-layer of n-Octyltriethoxysilane-coated hydrophobic sand buried 1.8 cm below the surface of hydrophilic sand; and (3) a 5.7-cm-thick layer with mixed wettabilities, consisting of 12% n-Octyltriethoxysilane-coated hydrophobic sand mixed into hydrophilic sand. The sand–water mixtures experienced forced convection above and through the sand layer, while a simulated solar flux (i.e., 112±20 W/m2) was applied. Evaporation from homogeneous porous media is classified into the constant-rate, falling-rate, and slow-rate periods. Wettability affected the observed evaporation mechanisms, including the transition from constant-rate to falling-rate periods. Evaporation entered the falling-rate period at 12%, 20%, and 24% saturations for the all hydrophilic sand, hydrophobic layer, and hydrophobic mixture, respectively. Wettability affected the duration of the experiments, as the all hydrophilic sand, hydrophobic layer, and hydrophobic mixture lasted 17, 20, and 26 trials, respectively. Both experiments with hydrophobic particles lasted longer than the all hydrophilic experiment and had shorter constant-rate evaporation periods, suggesting hydrophobic material interrupts capillary action of water to the soil surface and reduces evaporation. Sand temperatures suggest more evaporation occurred near the test section inlet for higher saturations and the hydrophobic layer experienced more evaporation occur near the outlet. Evaporation fluxes were up to 12× higher than the vapor diffusion flux due to enhanced vapor diffusion and forced convection. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email