An official website of the United States government
Abstract Water stress regulates land‐atmosphere carbon dioxide (CO2) exchanges in the tropics; however, its role remains poorly characterized due to the confounding roles of radiation, temperature and canopy dynamics. In particular, uncertainty stems from the relative roles of plant‐available water (supply) and atmospheric water vapor deficit (demand) as mechanistic drivers of photosynthetic carbon (C) uptake variability. Using satellite measurements of gravity, CO2and fluorescence to constrain a mechanistic carbon‐water cycle model from 2001 to 2018, we found that the interannual variability (IAV) of water stress on photosynthetic C uptake was 52% greater than the combined effects of other factors. Surprisingly, the dominance of water stress on C uptake IAV was greater in the wet tropics (94%) than in the dry tropics (26%). Plant‐available water supply and atmospheric demand both contributed to the IAV of water stress on photosynthetic C uptake across the tropics, but the IAV of demand effects was 21% greater than the IAV of supply effects (33% greater in the wet tropics and 6% greater in the dry tropics). We found that the IAV of water stress on C uptake was 24% greater than the IAV of the combination of other factors in the net land‐atmosphere C sink in the whole tropics, 26% greater in the wet tropics, and 7% greater in the dry tropics. Given the recent trends in tropical precipitation and atmospheric humidity, our findings indicate that water stress——from both supply and demand——will likely dominate the climate response of land C sink across tropical ecosystems in the coming decades.
more »
« less
This content will become publicly available on November 26, 2026
Wet Spun Aramid Nanofiber-Templated Hybrid Hydrogel Desiccant Filaments for Atmospheric Water Harvesting
Atmospheric water vapor is an abundant and renewable resource that can alleviate growing water scarcity. Hybrid hydrogel desiccants composed of hygroscopic salts hold significant promise for atmospheric water harvesting (AWH) due to their increased capacity for water uptake. Thus far, many efforts in fabricating these desiccants require multistep processes, where the salt impregnation is achieved post-hydrogel fabrication. Here, we develop a scalable wet spinning methodology using aramid nanofibers (ANFs) to template and coagulate hydroxypropyl cellulose (HPC) into filaments in a coagulation bath consisting of water and lithium chloride (LiCl). HPC serves as the matrix to retain the captured water vapor, and later releases it upon heating. ANFs serve as the physical cross-linker between HPC, allowing for wet spinning at a speed up to 61 m h–1. The composite filaments achieve up to 0.55 g g–1 water uptake at 30% relative humidity (RH) and 21 °C, reaching 80% saturation in 40 min. With a lower critical solution temperature of 39 °C, the desiccant filaments can release up to 72% of the captured water at 60 °C after 30 min. In an AWH chamber, the filaments can achieve daily water production of 5.21 L kg–1 day–1 at 30% RH and 21 °C.
more »
« less
- Award ID(s):
- 2037097
- PAR ID:
- 10650898
- Publisher / Repository:
- American Chemical Society
- Date Published:
- Journal Name:
- ACS Applied Materials & Interfaces
- Volume:
- 17
- Issue:
- 47
- ISSN:
- 1944-8244
- Page Range / eLocation ID:
- 65112 to 65123
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Liquid crystalline elastomers (LCEs) are promising candidates for the development of soft, environmentally‐responsive actuators and have recently been explored for application in smart textiles and soft robotics. To realize the potential of LCEs within these systems, the fast, scalable, and continuous production of LCE filaments at controlled diameters is critical. Here, a wet‐spinning method is presented for the scalable manufacturing of graphene/LCE composite filaments. Through a double diffusion mechanism, the graphene/LCE precursors rapidly crosslink into tangible filaments without the use of UV light, instead taking advantage of solvent exchange and high catalyst influx. The continuous production of polydomain graphene/LCE filaments can achieve speeds up to 4500 m h−1. Through π−π interactions between graphene and the LCE matrix, the composite graphene/LCE filaments across a broad range of diameters (137 to 1128 µm) can be obtained with high integrity, achieving actuation stresses and strains up to 3.66 MPa and 44%, respectively, in 3 s. The filaments are showcased as artificial muscles, where both thin and thick filament sizes are of interest. The presented scalable wet‐spinning method will open new opportunities to design smart textiles and soft robotics from fibers of controlled sizes.more » « less
-
Balazs, Anna (Ed.)Transforming atmospheric water vapor into liquid form can be a way to supply water to arid regions for uses such as drinking water, thermal management, and hydrogen generation. Many current methods rely on solid sorbents that cycle between capture and release at slow rates. We envision a radically different approach where water is transformed and directly captured into a liquid salt solution that is suitable for subsequent distillation or other processing using existing methods. In contrast to other methods utilizing hydrogels as sorbents, we do not store water within hydrogels—we use them as a transport medium. Inspired by nature, we capture atmospheric water through a hydrogel membrane “skin” at an extraordinarily high rate of 5.50 kg m^-2 d^-1 at a low humidity of 35%. and up to 16.9 kg m^-2 d^-1at higher humidities. For a drinking-water application, calculated performance of a hypothetical one-square-meter device shows that water could be supplied to two to three people in arid environments. This work is a significant step toward providing new resources and possibilities to water-scarce regions.more » « less
-
Anion exchange materials (AEMs) containing quaternary ammonium groups with charge balancing alkaline anions have shown promise for CO2 direct air capture (DAC), particularly under low-humidity conditions. These materials can be regenerated by increasing water activity, leveraging the moisture swing (MS) effect. The regeneration step releases heat due to water sorption, providing an opportunity to develop an autothermal Vacuum Moisture Swing (aVMS) process that utilizes both a change in CO2 affinity due to moisture and the heat of water sorption for efficient atmospheric CO2 capture. In this work, the moisture-driven CO2 sorption was studied for the first time using dynamic column breakthrough (DCB) experiments and subsequent modeling of the obtained sorption isotherms. The results confirm that humidity significantly affects the shape and capacity of the CO2 isotherms. CO2 uptake increased sharply at lower relative humidity (RH), while temperature had a less pronounced effect, especially at higher RH. At 15 % RH, the CO2 loading saturates at 200 ppm, with maximum loads of 0.82 mmol/g at 25 °C and 0.64 mmol/g at 45 °C. However, at 80 % RH, the CO2 partial pressure required for saturation increases significantly, reaching 60,000 ppm, and the maximum loading drops below 0.4 mmol/g. Interestingly, under certain conditions, partial water desorption was observed during CO2 sorption, suggesting a complex interplay between the two molecules and the MS sorbent. In addition, the influence of sorbent form factor, flow rate and column geometry on the separation performance was investigated. These findings not only advance the understanding of the complex interaction between CO2 and water during moisture swing processes but also provide a basis for the engineering of a cost-effective aVMS process for CO2 DAC.more » « less
-
Small molecule guests influence the functional properties of supramolecular hydrogels. Molecular-level understanding of such sol-gel compositions and structures is challenging due to the lack of long-range order and inherently heterogeneous sol-gel interface. In this study, insight into the uptake process of biologically relevant small molecules into guanosine-quartet(G4) borate hydrogels is obtained by gel-state magic-angle spinning (MAS) NMR spectroscopy. G4∙K + borate hydrogel can absorb up to 0.3 equivalent of cationic methylene blue (MB) without a significant disruption of the G4 fibrils that make up the gel, whereas the addition of over 0.3 equivalents of MB to the same gel leads to a gel-to-sol transition. The gel-to-sol transition process is characterized ex situ by analyzing and comparing the 1 H and 11 B MAS NMR spectra acquired before and after the MB uptake. In particular, 11 B isotropic chemical shifts and quadrupole interactions were determined by analyzing the 11 B MAS NMR spectra acquired at different magnetic fields, 11.7 T, 14.1 T and 20 T, which enable the different local bonding environments of borate anions in sol- and gel domains to be distinguished and identified. By comparison, uptake of heterocyclic molecules such as adenine, cytosine and 1-methylthymine into G4∙Na + borate hydrogels lead to stiff and clear gels while increasing the solubility of the nucleobases as compared to the solubility of the same compounds in water. G4∙Na + gel can uptake one equiv. of adenine with minimal disruption to the sol-gel framework, thus enhancing the adenine solubility up to an order of magnitude as compared to water. Combined multinuclear ( 1 H, 11 B and 23 Na) NMR spectroscopy analysis and vial inversion tests revealed that the nucleobases are embedded into pores of the sol phase rather than being closely interacting with the G-4 fibrils that make up the gel phase. These results indicate that G-4 hydrogels have potential applications as carrier systems for small molecules. Gel-state MAS NMR spectroscopy can be used to gain insight into host-guest interactions in complex heterogeneous sol-gel systems, which is often difficult to obtain from the conventional techniques such as X-ray scattering, electron microscopy and optical spectroscopy.more » « less
