skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


  • NSF Public Access
  • Search Results
  • Enhancing Uniform Crystallization and Grain Growth of Halide Perovskite Films by Combining Multipass Inkjet Printing and Antisolvent Bathing
Title: Enhancing Uniform Crystallization and Grain Growth of Halide Perovskite Films by Combining Multipass Inkjet Printing and Antisolvent Bathing
Recent manufacturing of perovskite solar cells (PSC) is moving beyond a spin coating technique. Among several new methods of the large‐area PSCs, inkjet printing (IJP) has emerged as a promising alternative to spin coating due to the high degree of control on printed film area and low material waste. In the IJP of PSCs, one important question is how to remove redundant excess solvent and facilitate the crystallization of the perovskite phase. Along with IJP, an antisolvent bathing is employed. This work reports how the IJP parameters and antisolvent bathing compositions affect the microstructure and initial efficiency of inkjet‐printed PSCs. The halide perovskite films are submerged in the antisolvent of different temperatures to observe the formation of an intermediate phase and the evolution of perovskite phase. By observing the phase evolution using X‐Ray diffraction, an optimized antisolvent bath duration is achieved for diethyl ether (DE) condition. An enhanced power conversion efficiency (PCE) and larger grain size with two sequential passes of inkjet‐deposited perovskite are also reported, and the dissolution of homogeneous nucleation sites as a mechanism for larger grains is proposed. Finally, with multipass IJP and cold antisolvent DE bathing, a champion device with 15.02% PCE is achieved.  more » « less
Award ID(s):
2314036 2130804
PAR ID:
10652397
Author(s) / Creator(s):
 ;  ;  ;  ;  
Publisher / Repository:
Wiley
Date Published:
Journal Name:
Advanced Energy and Sustainability Research
Volume:
6
Issue:
1
ISSN:
2699-9412
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; (, Energies)
    Perovskite photovoltaic technology carries immense opportunity for the solar industries because of its remarkable efficiency and prospect for cost-effective production. However, the successful deployment of perovskite solar modules (PSMs) in the solar market necessitates tackling stability-based obstacles, scalability, and environmental considerations. This paper unveils a comprehensive examination of the cutting-edge advancements in the manufacturing of perovskite solar cells (PSCs) and modules, with an emphasis on high-speed, large-area printing. The paper underscores the substantial progress achieved in printed PSCs and PSMs, demonstrating promising electrical performance and long-term device durability. This review paper categorizes printing techniques compatible with large-area high-speed manufacturing into three distinct families: blade coating, slot die coating, and screen printing, as these common printing practices offer precise control, scalability, cost-effectiveness, high resolution, and efficient material usage. Additionally, this paper presents an in-depth investigation and comparison of superior PSCs and PSMs fabricated by printing on power conversion efficiency (PCE), stability, and scalability. 
    more » « less
  2. ; ; ; ; ; ; ; ; ; ; et al (, Small)
    Abstract Dimethylammonium lead iodide (DMAPbIx) has the potential to address the phase stability issue of inorganic perovskite solar cells (PSCs). In this study, the crystallinity, phase structure, defect states, and crystal growth habits of DMAPbIxare controlled by adjusting thexvalue during synthesis, where N,N‐dimethylacetamide (DMAC) is used as the solvent to regulate perovskite film growth. Furthermore, large‐area CsPbI2.85Br0.15perovskite films with preferred oriented growth are achieved using the optimizedxvalue in DMAPbIxthrough the slot‐die coating method. The inorganic PSCs, with a n‐i‐p structure and the active area of 0.04 cm2, achieve a champion power conversion efficiency (PCE) of 19.82%, with an open‐circuit voltage (Voc) of 1.16 V based on perovskite films formed by slot‐die coating. This work provides important insights into the DMAPbIx‐based method for fabricating high‐quality inorganic perovskite films, and paves the way for large‐area inorganic PSCs fabrication for practical applications. 
    more » « less
  3. ; ; ; ; ; ; ; ; ; (, Advanced Materials)
    Abstract The performance of large‐area perovskite solar cells (PSCs) has been assessed for typical compositions, such as methylammonium lead iodide (MAPbI3), using a blade coater, slot‐die coater, solution shearing, ink‐jet printing, and thermal evaporation. However, the fabrication of large‐area all‐inorganic perovskite films is not well developed. This study develops, for the first time, an eco‐friendly solvent engineered all‐inorganic perovskite ink of dimethyl sulfoxide (DMSO) as a main solvent with the addition of acetonitrile (ACN), 2‐methoxyethanol (2‐ME), or a mixture of ACN and 2‐ME to fabricate large‐area CsPbI2.77Br0.23films with slot‐die coater at low temperatures (40–50 °C). The perovskite phase, morphology, defect density, and optoelectrical properties of prepared with different solvent ratios are thoroughly examined and they are correlated with their respective colloidal size distribution and solar cell performance. The optimized slot‐die‐coated CsPbI2.77Br0.23perovskite film, which is prepared from the eco‐friendly binary solvents dimethyl sulfoxide:acetonitrile (0.8:0.2 v/v), demonstrates an impressive power conversion efficiency (PCE) of 19.05%. Moreover, the device maintains ≈91% of its original PCE after 1 month at 20% relative humidity in the dark. It is believed that this study will accelerate the reliable manufacturing of perovskite devices. 
    more » « less
  4. ; ; ; ; ; ; ; ; ; (, Advanced Energy Materials)
    Abstract High‐performance tin‐lead perovskite solar cells (PSCs) are needed for all‐perovskite‐tandem solar cells. However, iodide related fast photodegradation severely limits the operational stability of Sn‐Pb perovskites despite the demonstrated high efficiency and thermal stability. Herein, this work employs an alkylammonium pseudo‐halogen additive to enhance the power conversion efficiency (PCE) and photostability of methylammonium (MA)‐free, Sn‐Pb PSCs. Density functional theory (DFT) calculations reveal that the pseudo‐halogen tetrafluoroborate (BF4−) has strong binding capacity with metal ions (Sn2+/Pb2+) in the Sn‐Pb perovskite lattice, which lowers iodine vacancy formation. Upon combining BF4−with an octylammonium (OA+) cation, the PCE of the device with a built‐in light‐scattering layer is boosted to 23.7%, which represents a new record for Sn‐Pb PSCs. The improved efficiency benefits from the suppressed defect density. Under continuous 1 sun illumination, the OABF4embodied PSCs show slower generation of interstitial iodides and iodine, which greatly improves the device photostability under open‐circuit condition. Moreover, the device based on OABF4retains 88% of the initial PCE for 1000 h under the maximum‐power‐point tracking (MPPT) without cooling. 
    more » « less
  5. ; ; ; ; ; (, Small Methods)
    Abstract Printed electronics have made remarkable progress in recent years and inkjet printing (IJP) has emerged as one of the leading methods for fabricating printed electronic devices. However, challenges such as nozzle clogging, and strict ink formulation constraints have limited their widespread use. To address this issue, a novel nozzle‐free printing technology is explored, which is enabled by laser‐generated focused ultrasound, as a potential alternative printing modality called Shock‐wave Jet Printing (SJP). Specifically, the performance of SJP‐printed and IJP‐printed bottom‐gated carbon nanotube (CNT) thin film transistors (TFTs) is compared. While IJP required ten print passes to achieve fully functional devices with channel dimensions ranging from tens to hundreds of micrometers, SJP achieved comparable performance with just a single pass. For optimized devices, SJP demonstrated six times higher maximum mobility than IJP‐printed devices. Furthermore, the advantages of nozzle‐free printing are evident, as SJP successfully printed stored and unsonicated inks, delivering moderate electrical performance, whereas IJP suffered from nozzle clogging due to CNT agglomeration. Moreover, SJP can print significantly longer CNTs, spanning the entire range of tube lengths of commercially available CNT ink. The findings from this study contribute to the advancement of nanomaterial printing, ink formulation, and the development of cost‐effective printable electronics. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Text Encoded Conversion
  • XML
  • Save / Share this Record
  • Send to Email