An official website of the United States government
Pipe-type cable systems, including high-pressure fluid-filled (HPFF) and high-pressure gas-filled cables, are widely used for underground high-voltage transmission. These systems consist of insulated conductor cables within steel pipes, filled with pressurized fluids or gases for insulation and cooling. Despite their reliability, faults can occur due to insulation degradation, thermal expansion, and environmental factors. As many circuits exceed their 40-year design life, efficient fault localization becomes crucial. Fault location involves prelocation and pinpointing. Therefore, a novel pinpointing approach for pipe-type cable systems is proposed, utilizing accelerometers mounted on a steel pipe to capture fault-induced acoustic signals and employing the time difference of arrival method to accurately pinpoint the location of the fault. The experimental investigations utilized a scaled-down HPFF pipe-type cable system setup, featuring a carbon steel pipe, high-frequency accelerometers, and both mechanical and capacitive discharge methods for generating acoustic pulses. The tests evaluated the propagation velocity, attenuation, and pinpointing accuracy with the pipe in various embedment conditions. The experimental results demonstrated accurate fault pinpointing in the centimeter range, even when the pipe was fully embedded, with the acoustic pulse velocities aligning closely with the theoretical values. These experimental investigation findings highlight the potential of this novel acoustic pinpointing technique to improve fault localization in underground systems, enhance grid reliability, and reduce outage duration. Further research is recommended to validate this approach in full-scale systems.
more »
« less
This content will become publicly available on October 1, 2026
A Physics-Enhanced CNN–LSTM Predictive Condition Monitoring Method for Underground Power Cable Infrastructure
Underground high-voltage transmission cables, especially high-pressure fluid-filled (HPFF) pipe-type cable systems, are critical components of urban power networks. These systems consist of insulated conductor cables housed within steel pipes filled with pressurized fluids that provide essential insulation and cooling. Despite their reliability, HPFF cables experience faults caused by insulation degradation, thermal expansion, and environmental stressors, which, due to their subtle and gradual nature, complicate incipient fault detection and subsequent fault localization. This study presents a novel, proactive, and retrofit-friendly predictive condition monitoring method. It leverages distributed accelerometer sensors non-intrusively mounted on the HPFF steel pipe within existing manholes to continuously monitor vibration signals in real time. A physics-enhanced convolutional neural network–long short-term memory (CNN–LSTM) deep learning architecture analyzes these signals to detect incipient faults before they evolve into critical failures. The CNN–LSTM model captures temporal dependencies in acoustic data streams, applying time-series analysis techniques tailored for the predictive condition monitoring of HPFF cables. Experimental validation uses vibration data from a scaled-down HPFF laboratory test setup, comparing normal operation to incipient fault events. The model reliably identifies subtle changes in sequential acoustic patterns indicative of incipient faults. Laboratory experimental results demonstrate a high accuracy of the physics-enhanced CNN–LSTM architecture for incipient fault detection with effective data feature extraction. This approach aims to support enhanced operational resilience and faster response times without intrusive infrastructure modifications, facilitating early intervention to mitigate service disruptions.
more »
« less
- PAR ID:
- 10652865
- Publisher / Repository:
- MDPI
- Date Published:
- Journal Name:
- Algorithms
- Volume:
- 18
- Issue:
- 10
- ISSN:
- 1999-4893
- Page Range / eLocation ID:
- 600
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Predictive maintenance for underground high-pressure fluid-filled (HPFF) power cables remains a critical challenge due to the weak and intermittent nature of fault-induced signals and the limited accessibility of buried infrastructure. This paper proposes a physics-informed Seq2Seq-attentionautoencoder acoustic monitoring (Echo-AE) model for predictive maintenance in underground HPFF cable systems. The Echo-AE model is developed based on a physics-informed loss function that incorporates both physics-based constraints and prediction errors. A controlled experimental setup of underground HPFF cable systems was used to capture continuous acoustic monitoring data, where three fault severity levels were generated, resulting in 4 million acoustic samples spanning normal operations and 15 fault events, and producing an imbalanced dataset with a 117:1 normal-tofault ratio to simulate real-world scenarios in which early-stage faults are rare. Results demonstrated Echo-AE’s superior early-stage fault detection capability compared with traditional models, with an F1-score of 0.8313, precision of 0.7864, recall of 0.8816, and an accuracy of 0.9936. The model exhibits fast convergence (20 epochs) and an area under the receiver operating characteristic curve of 0.998. Threshold sensitivity analysis revealed an optimal operation point that balances false positives and false negatives.more » « less
-
Early identification of rotating machinery faults is crucial to avoid catastrophic failures upon installation. Contact-based vibration acquisition approaches are traditionally used for the purpose of machine health monitoring and end-of-line quality control. In complex working conditions, it can be difficult to perform an accurate accelerometer based vibration test. Acoustic signals (sound pressure and particle velocity) also contain important information about the operating state of mechanical equipment and can be used to detect different faults. A deep learning approach, namely one-dimensional Convolution Neural Networks (1D-CNN) can directly process raw time signals thereby eliminating the human dependance on fault feature extraction. An experimental research study is conducted to test the proposed 1D-CNN methodology on three different electric motor faults. The results from the study indicate that the fault detection performance from the new acoustic-based method is very effective and thus can be a good replacement to the conventional accelerometer-based methods for detection and diagnosis of mechanical faults in electric motors.more » « less
-
Many industries are keenly interested in detecting and classifying faults before systems are sent to the customer or fail in use. A common approach is measuring the vibration of the machine and then using a classifier to check whether a fault is present. However, this process is difficult to automate because accelerometers are applied to the unit under test and are sometimes difficult to install and maintain due to complicated surface conditions. Accurate contact-based sensing is difficult when trying to check each rotating machinery assembly product during end-of-line quality control examinations or when evaluating the machine health of pre-installed rotating machinery. A deep learning-based fault classification system using both scalar and vector acoustic signals is a promising alternative that can replace the traditional error-prone, contact-based methods. Acoustic sound pressure and particle velocity measurements capture the directional fault signature of the mechanical defects in electric motors, and a one-dimensional convolutional neural networks (1D-CNNs) approach is proposed to process raw sensing data and eliminate the need for manual feature extraction. An experimental case study is performed to test the proposed 1D-CNN based fault classification on three different mechanically faulty electric motors across a variety of speeds. The results from acoustic pressure and particle velocity signals are compared against those from accelerometer signals. The experimental study confirms the feasibility of the proposed 1D-CNN on acoustic signals to be an excellent replacement for contact-based methods when assessing and classifying the machine fault condition. © 2025 Institute of Noise Control Engineering.more » « less
-
null (Ed.)Condition assessment of machinery components such as gears is important to maintain their normal operations and thus can bring benefit to their life circle management. Data-driven approaches haven been a promising way for such gear condition monitoring and fault diagnosis. In practical situation, gears generally have a variety of fault types, some of which exhibit continuous severities of fault. Vibration data collected oftentimes are limited to reflect all possible fault types. Therefore, there is practical need to utilize the data with a few discrete fault severities in training and then infer fault severities for the general scenario. To achieve this, we develop a fuzzy neural network (FNN) model to classify the continuous severities of gear faults based on the experimental measurement. Principal component analysis (PCA) is integrated with the FNN model to capture the main features of the time-series vibration signals with dimensional reduction for the sake of computational efficiency. Systematic case studies are carried out to validate the effectiveness of proposed methodology.more » « less
