An official website of the United States government
Abstract Organic redox-active molecules are attractive as redox-flow battery (RFB) reactants because of their low anticipated costs and widely tunable properties. Unfortunately, many lab-scale flow cells experience rapid material degradation (from chemical and electrochemical decay mechanisms) and capacity fade during cycling (>0.1%/day) hindering their commercial deployment. In this work, we combine ultraviolet-visible spectrophotometry and statistical inference techniques to elucidate the Michael attack decay mechanism for 4,5-dihydroxy-1,3-benzenedisulfonic acid (BQDS), a once-promising positive electrolyte reactant for aqueous organic redox-flow batteries. We use Bayesian inference and multivariate curve resolution on the spectroscopic data to derive uncertainty-quantified reaction orders and rates for Michael attack, estimate the spectra of intermediate species and establish a quantitative connection between molecular decay and capacity fade. Our work illustrates the promise of using statistical inference to elucidate chemical and electrochemical mechanisms of capacity fade in organic redox-flow battery together with uncertainty quantification, in flow cell-based electrochemical systems.
more »
« less
This content will become publicly available on January 1, 2027
Towards mitigating ring opening in TEMPO catholytes for aqueous redox flow batteries
TEMPO has been widely explored as one of the most promising catholyte redox scaffolds in aqueous redox flow batteries, but the often-observed performance degradation raises concern with respect to its chemical instability. In this work, we demonstrate that the charged TEMPO species (i.e., TEMPO+) lack sufficient stability and also determine the major decomposition pathways. The decay products of TEMPO+ are experimentally analyzed using combined tools including nuclear magnetic resonance and mass spectroscopy. Reductive conversion to 2,2,6,6-tetramethylpiperidine (TEMPH) is commonly observed for a variety of 4-O-substituted TEMPO derivatives. The general detection of alkene and related carbonyl signals, in conjunction with the electrolyte acidification, reveals a deprotonation-initiated ring opening route that proceeds towards TEMPO decay. The protons on the β carbon are susceptible to chemical extraction by nucleophilic agents such as hydroxyl and the formed piperidine. This finding highlights the intrinsic structural factors for TEMPO degradation and will shed light on the potential stabilization strategies to afford long-cycling TEMPO-based flow batteries.
more »
« less
- PAR ID:
- 10657042
- Editor(s):
- Hagfeldt, Anders
- Publisher / Repository:
- Royal Society of Chemistry
- Date Published:
- Journal Name:
- Journal of Materials Chemistry A
- ISSN:
- 2050-7488
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Lithium-based nonaqueous redox flow batteries (LRFBs) are alternative systems to conventional aqueous redox flow batteries because of their higher operating voltage and theoretical energy density. However, the use of ion-selective membranes limits the large-scale applicability of LRFBs. Here, we report high-voltage membrane-free LRFBs based on an all-organic biphasic system that uses Li metal anode and 2,4,6-tri-(1-cyclohexyloxy-4-imino-2,2,6,6-tetramethylpiperidine)-1,3,5-triazine (Tri-TEMPO), N-propyl phenothiazine (C3-PTZ), and tris(dialkylamino)cyclopropenium (CP) cathodes. Under static conditions, the Li||Tri-TEMPO, Li||C3-PTZ, and Li||CP batteries with 0.5 M redox-active material deliver capacity retentions of 98%, 98%, and 92%, respectively, for 100 cycles over ~55 days at the current density of 1 mA/cm2and a temperature of 27 °C. Moreover, the Li||Tri-TEMPO (0.5 M) flow battery delivers an initial average cell discharge voltage of 3.45 V and an energy density of ~33 Wh/L. This flow battery also demonstrates 81% of capacity for 100 cycles over ~45 days with average Coulombic efficiency of 96% and energy efficiency of 82% at the current density of 1.5 mA/cm2and at a temperature of 27 °C.more » « less
-
Murzin, Dmitry Yu (Ed.)Nonaqueous flow batteries hold promise given their high cell voltage and energy density, but their performance is often plagued by the crossover of redox compounds. In this study, we used permselective lithium superionic conducting (LiSICON) ceramic membranes to enable reliable long-term use of organic redox molecules in nonaqueous flow cells. With different solvents on each side, enhanced cell voltages were obtained for a flow battery using viologen-based negolyte and TEMPO-based posolyte molecules. The thermoplastic assembly of the LiSICON membrane realized leakless cell sealing, thus overcoming the mechanical brittleness challenge. As a result, stable cycling was achieved in the flow cells, which showed good capacity retention over an extended test time.more » « less
-
Abstract Ferrocyanide, such as K4[Fe(CN)6], is one of the most popular cathode electrolyte (catholyte) materials in redox flow batteries. However, its chemical stability in alkaline redox flow batteries is debated. Mechanistic understandings at the molecular level are necessary to elucidate the cycling stability of K4[Fe(CN)6] and its oxidized state (K3[Fe(CN)6]) based electrolytes and guide their proper use in flow batteries for energy storage. Herein, a suite of battery tests and spectroscopic studies are presented to understand the chemical stability of K4[Fe(CN)6] and its charged state, K3[Fe(CN)6], at a variety of conditions. In a strong alkaline solution (pH 14), it is found that the balanced K4[Fe(CN)6]/K3[Fe(CN)6] half‐cell experiences a fast capacity decay under dark conditions. The studies reveal that the chemical reduction of K3[Fe(CN)6] by a graphite electrode leads to the charge imbalance in the half‐cell cycling and is the major cause of the observed capacity decay. In addition, at pH 14, K3[Fe(CN)6] undergoes a slow CN‐/OH‐exchange reaction. The dissociated CN‐ligand can chemically reduce K3[Fe(CN)6] to K4[Fe(CN)6] and it is converted to cyanate (OCN‐) and further, decomposes into CO32‐and NH3. Ultimately, the irreversible chemical conversion of CN‐to OCN‐leads to the irreversible decomposition of K4/K3[Fe(CN)6] at pH 14.more » « less
-
Chemical redox reactions between redox shuttles and lithium-ion battery particles have applications in electrochemical systems including redox-mediated flow batteries, photo-assisted lithium-ion batteries, and lithium-ion battery overcharge protection. These previous studies, combined with interest in chemical redox of battery materials in general, has resulted in previous reports of the chemical oxidation and/or reduction of solid lithium-ion materials. However, in many of these reports, a single redox shuttle is the focus and/or the experimental conditions are relatively limited. Herein, a study of chemical redox for a series of redox shuttles reacted with a lithium-ion battery cathode material will be reported. Both oxidation and reduction of the solid material with redox shuttles as a function of time will be probed using ferrocene derivatives with different half-wave potentials. The progression of the chemical redox was tracked by using electrochemical analysis of the redox shuttles in a custom electrochemical cell, and rate constants for chemical redox were extracted from using two different models. This study provides evidence that redox shuttle-particle interactions play a role in the overall reaction rate, and more broadly support that this experimental method dependent on electrochemical analysis can be applied for comparison of redox shuttles reacting with solid electroactive materials.more » « less
