Abstract Drylands occupy nearly 40% of the land surface and comprise a globally significant carbon reservoir. Dryland‐atmosphere carbon exchange may regulate interannual variability in atmospheric CO2. Quantifying soil respiration rates in these environments is often complicated by the presence of calcium carbonates, which are a common feature of dryland soils. We show with high‐precision O2measurements in a laboratory potted soil experiment that respiration rates after watering were similar in control and carbonate treatment soils. However, CO2concentrations were up to 72% lower in the carbonate treatment soil because CO2was initially consumed during calcite dissolution. Subsequently, CO2concentrations were over 166% greater in the carbonate treatment soil as respiration slowed and calcite precipitated, releasing CO2. Elevated δ13C values of soil CO2(>6‰ higher in the treatment than control) confirm that observed differences were due to calcite dissolution. These findings demonstrate that calcite dissolution and precipitation can occur rapidly enough to affect soil gas compositions and that changes in soil CO2are not always directly related to changes in soil respiration rates. Studies of local soil respiration rates and carbon exchange are likely to be influenced by dissolution and precipitation of calcium carbonates in soils. We estimate that one fifth of global soil respiration occurs in soils that contain some amount of soil carbonate, underscoring the need to account for its obscuring effects when trying to quantify soil respiration and net ecosystem exchange on a regional or global scale.
more »
« less
Enhancing the Solubility of Co-Formulated Hydrophobic Drugs by Incorporating Functionalized Nano-Structured Poly Lactic-co-glycolic Acid (nfPLGA) During Co-Precipitation
Background/Objectives: The co-formulation of active pharmaceutical ingredients (APIs) is a growing strategy in biopharmaceutical development, particularly when it comes to improving solubility and bioavailability. This study explores a co-precipitation method to prepare co-formulated crystals of griseofulvin (GF) and dexamethasone (DXM), utilizing nanostructured, functionalized polylactic glycolic acid (nfPLGA) as a solubility enhancer. Methods: An antisolvent precipitation technique was employed to incorporate nfPLGA at a 3% concentration into the co-formulated GF and DXM, referred to as DXM-GF-nfPLGA. The dissolution performance of this formulation was compared to that of the pure drugs and the co-precipitated DXM-GF without nfPLGA. Results: Several characterization techniques, including electron microscopy (SEM), RAMAN, FTIR, TGA, and XRD, were used to analyze the nfPLGA incorporation and the co-precipitated co-formulations. The inclusion of nfPLGA significantly enhanced the dissolution and initial dissolution rate of both GF and DXM in the DXM-GF-nfPLGA formulation, achieving a maximum dissolution of 100%, which was not attained by the pure drugs or the DXM-GF formulation. The incorporation of nfPLGA also reduced the amount of time taken to reach 50% (T50) and 80% (T80) dissolution. T50 values decreased from 52 and 82 min (for pure DXM and GF) to 23 min for DXM-GF-nfPLGA, and the T80 improved to 50 min for DXM-GF-nfPLGA, significantly outpacing the pure compounds. Furthermore, incorporating nfPLGA into the crystal structures greatly accelerated the dissolution rates, with initial rates reaching 650.92 µg/min for DXM-GF-nfPLGA compared to 540.60 µg/min for DXM-GF, while pure GF and DXM showed lower rates. Conclusions: This work demonstrates that nfPLGA incorporation enhances dissolution performance by forming water channels within the API crystal via hydrogen-bonding interactions. This innovative nfPLGA incorporation method holds promise for developing hydrophobic co-formulations with faster solubility and dissolution rates.
more »
« less
- Award ID(s):
- 2331429
- PAR ID:
- 10658037
- Publisher / Repository:
- MDPI
- Date Published:
- Journal Name:
- Pharmaceutics
- Volume:
- 17
- Issue:
- 1
- ISSN:
- 1999-4923
- Page Range / eLocation ID:
- 77
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Pharmaceutical solid solutions are gaining increased interest as alternatives to salts and co-crystals for the enhancement of drug solubility and dissolution kinetics. Industrially, they are also responsible for the entrapment of potentially toxic impurities in drug substances. The accidental incorporation of process impurities into the lattice of a growing crystal, or the intentional incorporation of an additive, can vastly alter the product's properties. Reported effects include solubility enhancements, changes in melting point, shifting polymorph stabilities, growth inhibition, and change in crystal habit, among others. This work combines the fields of impurity rejection, solid solutions, and dyeing crystals, to provide visual evidence of those effects, and to further demonstrate how impure regions in a single crystal can present vastly different behaviors to the purified regions of the same crystal. The work revolves around four model host–guest pairs, two of them previously unreported. These include mixed crystals of acetaminophen with curcumin, sulforhodamine B, and acid fuchsin, as well as potassium sulfate dyed with acid fuchsin. Results challenge common assumptions in the study of multicomponent crystals, demonstrating how neglecting composition anisotropy may lead to misdiagnosing solid solutions as surface adsorbed impurities in impurity retention diagnostics, and how neglecting the habit-modifying effects of dissolved impurities may lead to the use of erroneous models for growth inhibition. At the same time, we present opportunities for the development of novel impurity rejection and crystal engineering strategies, aiding the growth of anisotropic crystals with properties that can be fine-tuned in continuum.more » « less
-
Falsified antimalarial pharmaceuticals are a worldwide problem with negative public health implications. Here, we develop a surface-enhanced Raman scattering (SERS) protocol to recognize substandard and falsified antimalarial drugs present in commercially available tablets. After recording SERS spectra for pure chloroquine, primaquine, and doxycycline, SERS is used to measure these drugs formulated as active pharmaceutical ingredients (APIs) in the presence of common pharmaceutical caplet excipients. To demonstrate the viability of our approach, a red team study was also performed where low-quality and falsified formulations of all three drugs presented as unknowns were identified. These data in conjunction with promising results from a portable Raman spectrometer suggest that SERS is a viable technique for on-site analysis of drug quality.more » « less
-
Lead (Pb) solubility is commonly limited by dissolution–precipitation reactions of secondary mineral phases in contaminated soils and water. In the research described here, Pb solubility and free Pb2+ ion activities were measured following the precipitation of Pb minerals from aqueous solutions containing sulfate or carbonate in a 1:5 mole ratio in the absence and presence of phosphate over the pH range 4.0–9.0. Using X-ray diffraction and Fourier-transform infrared spectroscopic analysis, we identified anglesite formed in sulfate-containing solutions at low pH. At higher pH, Pb carbonate and carbonate-sulfate minerals, hydrocerussite and leadhillite, were formed in preference to anglesite. Precipitates formed in the Pb-carbonate systems over the pH range of 6 to 9 were composed of cerussite and hydrocerussite, with the latter favored only at the highest pH investigated. The addition of phosphate into the Pb-sulfate and Pb-carbonate systems resulted in the precipitation of Pb3(PO4)2 and structurally related pyromorphite minerals and prevented Pb sulfate and carbonate mineral formation. Phosphate increased the efficiency of Pb removal from solution and decreased free Pb2+ ion activity, causing over 99.9% of Pb to be precipitated. Free Pb2+ ion activities measured using the ion-selective electrode revealed lower values than predicted from thermodynamic constants, indicating that the precipitated minerals may have lower KSP values than generally reported in thermodynamic databases. Conversely, dissolved Pb was frequently greater than predicted based on a speciation model using accepted thermodynamic constants for Pb ion-pair formation in solution. The tendency of the thermodynamic models to underestimate Pb solubility while overestimating free Pb2+ activity in these systems, at least in the higher pH range, indicates that soluble Pb ion-pair formation constants and KSP values need correction in the models.more » « less
-
Abstract Crystals retain an imprint of the dynamic changes within a magma reservoir and hence contain invaluable information about the evolving conditions inside volcanic plumbing systems. However, instead of telling a single, simple story, they comprise overprinted evidence of numerous processes relating to temperature, pressure and composition that drive crystal precipitation and dissolution in magmatic systems. To decipher these different elements in the story that crystals tell, we attempt to identify the observational signatures of a simple, yet ubiquitous process: crystal precipitation and dissolution during magma cooling. To isolate this process in a complex magmatic system with intricate dynamic feedbacks, we assume that synthetic crystals precipitate and dissolve rapidly in response to deviations from thermodynamic equilibrium. In our crystalline‐scale simulations, synthetic crystals drag along the cooler‐than‐ambient melt in which they precipitated and can drive a temperature‐dependent, crystal‐driven convection. We analyze the non‐dimensional conditions for this coupled convection and record the heterogeneous thermal histories that synthetic crystals in this flow regime experience. We show that many synthetic crystals dissolve, loosing their thermal record of the convection. Based on our findings, we suggest that heterogeneity in the thermal history of crystals is more indicative of local, crystal‐scale processes than the overall, system‐wide cooling trend.more » « less
An official website of the United States government

