skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


This content will become publicly available on February 1, 2027

Title: Impact of Heating Electrification and Building Retrofit on the Indoor Thermal Environment and Electricity Demand
Retrofitting building stock through heating electrification and energy efficiency improvements is essential for achieving carbon neutrality. Understanding the effects of electrification and efficiency retrofits on building-resident satisfaction and adaptive behaviors is important, as these directly impact retrofitting success, adoption rates, energy consumption, and performance. There is a gap in understanding the combined effects of heating electrification and building efficiency retrofits. Using data collected over 2.5 years, we performed integrated qualitative and quantitative analyses to evaluate the combined effects of heat pump electrification and a roof insulation retrofitting in a 10-unit New York City apartment building. Building-resident satisfaction with each strategy was assessed, and impacts on occupant thermal comfort, energy behavior, indoor thermal environment, and energy consumption were analyzed. Despite perceived challenges and resident skepticism, air source heat pumps (ASHPs) provided adequate indoor thermal comfort. ASHPs were preferred over steam boiler heating for controllability, noise reduction, and improved thermal comfort. Unintended benefits included improved aesthetics, reduced real estate needs, and decreased burn potential. With heat pumps, some residents adopted energy-conservative behaviors while others adopted “comfort-taking” behaviors, prioritizing comfort over conservation. The roof insulation retrofit further improved resident thermal comfort and decreased total building heating energy requirements by 25.3–34.2% and heating peak power requirements by 10.7%. The retrofit also improved ASHP efficiency in previously uninsulated spaces, effectively mitigating heat pump undersizing effects. Combined energy retrofitting strategies could play a key role in ensuring thermal comfort and building energy efficiency toward carbon neutrality.  more » « less
Award ID(s):
1952063
PAR ID:
10659998
Author(s) / Creator(s):
; ; ; ;
Publisher / Repository:
American Society of Mechanical Engineers,
Date Published:
Journal Name:
ASME Journal of Engineering for Sustainable Buildings and Cities
Volume:
7
Issue:
1
ISSN:
2642-6641
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; (, Energy)
    Elsevier (Ed.)
    Electrification of buildings through deployment of heat pumps requires innovative design and control strategies to reduce their energy demands on the grid. Instead of the sequential approach of optimizing the design specifications and control strategies, this paper considers the benefits of the combined and simultaneous optimization of design capacities and control settings for heat pumps when specified for US residential buildings. A Genetic Algorithm optimizer is used to simultaneously adjust the main and supplementary coil capacities for the heat pump as well as the indoor temperature setpoints to minimize annual heating and cooling energy needs as well as occupant thermal discomfort levels. In comparison to design and control baselines, it is found that simultaneous optimization can achieve 21% and 7% reductions in heating and cooling annual energy consumption for the cases of variable speed and single speed heat pumps. Moreover, the analysis results indicate that these reductions are nearly double the savings obtained when design only and control only based optimizations are considered. The presented combined design and control optimization approach could potentially provide an effective paradigm shift in specifying heat pump systems for residential buildings. 
    more » « less
  2. ; ; (, Journal of Applied Meteorology and Climatology)
    Abstract In this work, we investigate the effect of areawide building retrofitting on summertime, street-level outdoor temperatures in an urban district in Berlin, Germany. We perform two building-resolving, weeklong large-eddy simulations: one with nonretrofitted buildings and the other with retrofitted buildings in the entire domain to meet today’s energy efficiency standards. The comparison of the two simulations reveals that the mean outdoor temperatures are higher with retrofitted buildings during daytime conditions. This behavior is caused by the much smaller inertia of the outermost roof/wall layer in the retrofitting case, which is thermally decoupled from the inner roof/wall layers by an insulation layer. As a result, the outermost layer heats up more rigorously during the daytime, leading to increased sensible heat fluxes into the atmosphere. During the nighttime, the outermost layer’s temperature drops down faster, resulting in cooling of the atmosphere. However, as the simulation progresses, the cooling effect becomes smaller and the warming effect becomes larger. After 1 week, we find the mean temperatures to be 4 K higher during the daytime while the cooling effects become negligible. Significance Statement Building retrofitting is taking place in Europe and other continents as a measure to reduce energy consumption. The change in the building envelope directly influences the urban atmosphere. Our study reveals that areawide retrofitting in a German city district can have negative effects on the outdoor microclimate in summer by causing higher air temperatures. 
    more » « less
  3. ; ; (, Resources, Conservation and Recycling)
    Residential heat pumps could reduce greenhouse gas emissions, but increase energy burdens, the proportion of income households spend on utility bills. We analyze utility bills, thermostat settings and energy burdens for a sample of 51 households in Michigan, half below median income. We recruit a contractor to conduct energy assessments of these households and provide them with energy retrofit recommendations, including estimated costs and savings. We find that low-income households choose similar temperature setpoints to higher-income households, but live in less efficient homes. Below-median income households, which today experience a median energy burden of 6%, would see it rise to 10% if they shifted to electric heat pumps from natural gas. Weatherization could offset this increase, bringing burdens down to pre-electrification levels. However, median payback is 24 years, making retrofits infeasible for the poorest. Our results are indicative of an energy poverty trap that could hinder an equitable energy transition. 
    more » « less
  4. ; (, Energies)
    MDPI (Ed.)
    This paper provides an analysis of challenges and available solutions for exterior insulated panels suitable for deep energy retrofits of existing building envelopes. The analysis covers a review of available technologies that provide flexible retrofit insulated panels suitable for multiple climates and building typologies. Moreover, the paper proposes a new design for insulated retrofit panels that account for the majority of identified technical risks including cost, architectural diversity, climate variations, structural concerns, moisture resilience, air sealing, and water sealing. Additionally, the proposed design can be easily installed with minimal disruption to the occupants. A series of parametric and optimization analyses is carried out to identify the optimal design specifications for insulated panels suitable for deep retrofits of existing US housing stocks. The analysis results show that the optimal design criteria for the insulated panels can reduce heating and cooling energy consumption by up to 80% and HVAC capacities by 70%. Moreover, the results indicate that these insulated panels are highly cost effective for retrofitting US housing units located in cold climates. 
    more » « less
  5. ; ; ; ; ; ; ; (, 108th ACSA Annual Meeting Proceeding)
    null (Ed.)
    Buildings use 40% of the global energy consumption and emit 30% of the CO2 emissions [1]. Of the total building energy, 30-40% are for building heating and cooling systems, which regulate the indoor thermal environment and provide thermal comfort to occupants. In the United States, most buildings use forced air technology to deliver heating/cooling to the targeted thermal zones. However, this system may cause complaints about thermal comfort from inhabitants due to excessive draft movement, inhomogeneous conditioning, and difficulty in accurately controlling the temperature for a system serving multiple rooms. Therefore, researchers have suggested using a radiant heating and cooling system as a better alternative to all-air systems to address these issues. Radiant systems supply heating or cooling directly to the building space using radiation released by the heated or cooled building enclosure via the embedded heating or cooling tubes. In the cooling season, the radiant system often works with a separated dehumidifier to meet space latent and sensible cooling load (called separate sensible and latent cooling system SSLC). The SSLC has shown higher efficiency than forced air systems. However, it is unsure whether the radiant heating and cooling system can provide better thermal comfort to occupants. Moreover, the evaluation method for thermal comfort in the current standard is suitable for forced air systems. Therefore, a new method shall be developed to evaluate the radiation system’s thermal comfort. In this paper, we review the experiment-based studies on the thermal comfort of radiant systems. According to the experimental studies regarding thermal comfort and radiant systems, the key findings are concluded to help guide the evaluation of thermal comfort for radiant systems. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email