skip to main content


Search for: All records

Creators/Authors contains: "Zheng, Bocong"

Note: When clicking on a Digital Object Identifier (DOI) number, you will be taken to an external site maintained by the publisher. Some full text articles may not yet be available without a charge during the embargo (administrative interval).
What is a DOI Number?

Some links on this page may take you to non-federal websites. Their policies may differ from this site.

  1. A single-beam plasma source was developed and used to deposit hydrogenated amorphous carbon (a-C:H) thin films at room temperature. The plasma source was excited by a combined radio frequency and direct current power, which resulted in tunable ion energy over a wide range. The plasma source could effectively dissociate the source hydrocarbon gas and simultaneously emit an ion beam to interact with the deposited film. Using this plasma source and a mixture of argon and C2H2 gas, a-C:H films were deposited at a rate of ∼26 nm/min. The resulting a-C:H film of 1.2 µm thick was still highly transparent with a transmittance of over 90% in the infrared range and an optical bandgap of 2.04 eV. Young’s modulus of the a-C:H film was ∼80 GPa. The combination of the low-temperature high-rate deposition of transparent a-C:H films with moderately high Young’s modulus makes the single-beam plasma source attractive for many coatings applications, especially in which heat-sensitive and soft materials are involved. The single-beam plasma source can be configured into a linear structure, which could be used for large-area coatings.

     
    more » « less
  2. Abstract A single-beam ion source was developed and used in combination with magnetron sputtering to modulate the film microstructure. The ion source emits a single beam of ions that interact with the deposited film and simultaneously enhances the magnetron discharge. The magnetron voltage can be adjusted over a wide range, from approximately 240 to 130 V, as the voltage of the ion source varies from 0 to 150 V, while the magnetron current increases accordingly. The low-voltage high-current magnetron discharge enables a ‘soft sputtering mode’, which is beneficial for thin-film growth. Indium tin oxide (ITO) thin films were deposited at room temperature using a combined single-beam ion source and magnetron sputtering. The ion beam resulted in the formation of polycrystalline ITO thin films with significantly reduced resistivity and surface roughness. Single-beam ion-source-enhanced magnetron sputtering has many potential applications in which low-temperature growth of thin films is required, such as coatings for organic solar cells. 
    more » « less
  3. null (Ed.)
  4. null (Ed.)
  5. Abstract

    Lithium metal batteries (LMBs) are considered the most promising energy storage devices for applications such as electrical vehicles owing to its tremendous theoretical capacity (3860 mAh g−1). However, the serious safety issues and poor cycling performance caused by the dendritic crystal growth during deposition are concerned for any rechargeable batteries with a lithium metal anode. To make widespread adoption a possibility, considerable efforts have been devoted to suppressing lithium (Li) dendrite growth. In this review, the recent strategies to developing dendrite free Li anode, including constructing an artificial solid electrolyte interface, current collector modification, separator film improvement, and electrolyte additive, are summarized. The merits and shortcomings for different strategies are reviewed and a general summary and perspective on the next generation rechargeable batteries are presented.

    image

     
    more » « less