skip to main content


Search for: All records

Editors contains: "Teherani, Ferechteh H"

Note: When clicking on a Digital Object Identifier (DOI) number, you will be taken to an external site maintained by the publisher. Some full text articles may not yet be available without a charge during the embargo (administrative interval).
What is a DOI Number?

Some links on this page may take you to non-federal websites. Their policies may differ from this site.

  1. Teherani, Ferechteh H ; Rogers, David J (Ed.)
    Free, publicly-accessible full text available March 15, 2025
  2. Teherani, Ferechteh H. ; Rogers, David J. (Ed.)
  3. Teherani, Ferechteh H. ; Rogers, David J. (Ed.)
    We demonstrated a metal-organic chemical vapor deposition (MOCVD) of smooth, thick, and monoclinic phase-pure gallium oxide (Ga2O3) on c-plane sapphire using silicon-oxygen bonding (SiOx) as a phase stabilizer. The corundum (α), monoclinic (β), and orthorhombic (ε) phases of Ga2O3 with a bandgap in the 4.4 – 5.1 eV range, are promising materials for power semiconductor devices and deep ultraviolet (UV) solar-blind photodetectors. The MOCVD systems are extensively used for homoepitaxial growth of β-Ga2O3 on (001), (100), (010), and (¯2 01) β-Ga2O3 substrates. These substrates are rare/expensive and have very low thermal conductivity; thus, are not suitable for high-power semiconductor devices. The c-plane sapphire is typically used as a substrate for high-power devices. The β-Ga2O3 grows in the (¯2 01) direction on sapphire. In this direction, the presence of high-density oxygen dangling bonds, frequent stacking faults, twinning, and other phases and planes impede the heteroepitaxy of thick β-Ga2O3. Previously phase stabilizations with SiOx have been reported for tetragonal and monoclinic hafnia. We were able to grow ~580nm thick β-Ga2O3 on sapphire by MOCVD at 750 oC through phase stabilization using silane. The samples grown with silane have a reduction in the surface roughness and resistivity from 10.7 nm to 4.4 nm and from 371.75 Ω.cm to 135.64 Ω.cm, respectively. These samples show a pure-monoclinic phase determined by x-ray diffraction (XRD); have tensile strain determined by Raman strain mapping. These results show that a thick, phase-pure -Ga2O3 can be grown on c-plane sapphire which can be suitable for creating power devices with better thermal management. 
    more » « less
  4. Teherani, Ferechteh H. ; Look, David C. ; Rogers, David J. (Ed.)
  5. Teherani, Ferechteh H. ; Look, David C. ; Rogers, David J. (Ed.)
  6. Teherani, Ferechteh H. ; Look, David C. ; Rogers, David J. (Ed.)
  7. Teherani, Ferechteh H. ; Look, David C. ; Rogers, David J. (Ed.)
    Gallium oxide (Ga2O3), an ultra-wide bandgap semiconductor with potential applications in power devices, may be doped with Mg to control the native n-type conductivity. The charge transitions associated with Mg in Mg-doped β-Ga2O3 crystals are studied using photoinduced electron paramagnetic resonance (photo-EPR) spectroscopy to understand the mechanisms that produce stable semi-insulating substrates. The steady state photo-EPR measurements are performed at 130 K by illuminating the samples with photon energy from 0.7 to 4.7 eV. Our results show that there are two transitions associated with Mg in the bandgap: onset of quenching of neutral Mg at 1.5 eV and excitation at 3.0 eV. The quenching threshold is consistent with several DFT predicted values for Mg-/0 level. Therefore, we suggest the quenching is due to transition of an electron from the valence band to the neutral Mg. For photoexcitation, hole capture is the only viable process due to polaronic nature of neutral Mg in Ga2O3. The measurements demonstrate that electron excitation to impurities, such as Fe and Ir, does not contribute to creation of the holes. Further, gallium vacancies must not participate since their characteristic EPR spectrum is never seen. Thus, we speculate that the defects responsible for the hole formation and consequent excitation of the neutral Mg are oxygen vacancies. 
    more » « less