skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Millimeter wave cell search for initial access: Analysis, design, and implementation
Millimeter wave (mmWave) technology is gaining momentum because of its ability to provide high data rates. However, in addition to other challenges in the operation of mmWave systems, developing cell search algorithms is a challenge due to high path loss, directional transmission, and excessive sensitivity to blockage at mmWave frequencies. Thus, the cell search schemes of long term evolution (LTE) cannot be used with mmWave networks. Exhaustive and iterative search algorithms have been proposed in literature for carrying out cell search in mmWave systems. The exhaustive search offers high probability of detection with high discovery delay while the iterative approach offers low probability of detection with low discovery delay. In this paper, we propose a hybrid algorithm that combines the strengths of exhaustive and iterative methods. We compare the three algorithms in terms of misdetection probability and discovery delay and show that hybrid search is a smarter algorithm that achieves a desired balance between probability of detection performance and discovery delay.  more » « less
Award ID(s):
1642865
PAR ID:
10043840
Author(s) / Creator(s):
; ; ;
Date Published:
Journal Name:
IEEE International Wireless Communications and Mobile Computing Conference (IWCMC), 2017
Page Range / eLocation ID:
922 to 927
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; (, IEEE International Conference on Communications (ICC-18))
    The highly sparse nature of propagation channels and the restricted use of radio frequency (RF) chains at transceivers limit the performance of millimeter wave (mmWave) multiple-input multiple-output (MIMO) systems. Introducing reconfigurable antennas to mmWave can offer an additional degree of freedom on designing mmWave MIMO systems. This paper provides a theoretical framework for studying the mmWave MIMO with reconfigurable antennas. We present an architecture of reconfigurable mmWave MIMO with beamspace hybrid analog-digital beamformers and reconfigurable antennas at both the transmitter and the receiver. We show that employing reconfigurable antennas can provide throughput gain for the mmWave MIMO. We derive the expression for the average throughput gain of using reconfigurable antennas, and further simplify the expression by considering the case of large number of reconfiguration states. In addition, we propose a low-complexity algorithm for the reconfiguration state and beam selection, which achieves nearly the same throughput performance as the optimal selection of reconfiguration state and beams by exhaustive search. 
    more » « less
  2. ; ; ; (, IEEE)
    IEEE (Ed.)
    Not AvailableThis paper presents a Light Detection and Ranging (LiDAR) based technique for identifying non-line-of-sight (NLoS) communication paths in indoor millimeter-wave (mmWave) environments. This is achieved by using LiDAR distance and backscattered intensity measurements to i) create a map of the communication environment, and ii) identify a set of potential reflective surfaces for NLoS communication. Experimental results demonstrate that the proposed technique, which combines environmental geometry and LiDAR scatter data for ray-tracing, achieves performance comparable to traditional exhaustive search beam training methods, particularly for first-ranked (top- 1) alternative NLoS paths. This offers a promising solution for enhancing indoor mmWave communications in dynamic environments prone to line-of-sight link blockages without the need for a fully dedicated beam training stage. 
    more » « less
  3. ; ; (, IEEE International Conference on Communications)
    In this paper, we consider the amplify-and-forward relay networks in mmWave systems and propose a hybrid precoder/combiner design approach. The phase-only RF precoding/ combining matrices are first designed to support multi-stream transmission, where we compensate the phase for the eigenmodes of the channel. Then, the baseband precoders/combiners are performed to achieve the maximum mutual information. Based on the data processing inequality for the mutual information, we first jointly design the baseband source and relay nodes to maximize the mutual information before the destination baseband receiver. The proposed low-complexity iterative algorithm for the source and relay nodes is based on the equivalence between mutual information maximization and the weighted MMSE. After we obtain the optimal precoder and combiner for the source and relay nodes, we implement the MMSE-SIC filter at the baseband receiver to keep the mutual information unchanged, thus obtaining the optimal mutual information for the whole relay system. Simulation results show that our algorithm achieves better performance with lower complexity compared with other algorithms in the literature. 
    more » « less
  4. ; ; ; (, IET Communications)
    Abstract Low latency beamforming using phased antenna arrays is the key for practical deployment of envisioned millimetre wave (mmWave) Gbps mobile networks. This work aims towards reducing the overhead of the exhaustive sector‐level sweep phase of the analog beamforming adopted in the IEEE 802.11ad standard. This work is the first to propose the use of reconfigurable antenna single RF chain in the sub‐6 GHz new radio (NR) band to aid codebook‐based beam selection in the mmWave band of the NR. We exploit the congruence between the spatial propagation signatures of signals at both mmWave and sub‐6 GHz frequencies to reduce the beam search space. The simulation results show a significant reduction in mmWave beam search overhead up to on average and with an average gain loss of 3dB. 
    more » « less
  5. ; ; (, IEEE Transactions on Communications)
    Millimeter-wave large-scale antenna systems typically apply hybrid analog-digital precoders to reduce hardware complexity and power consumption. In this paper, we design hybrid precoders for physical-layer security under two types of channel knowledge. With full channel knowledge at transmitter, we provide sufficient conditions on the minimum number of RF chains needed to realize the performance of the fully digital precoding. Then, we design the hybrid precoder to maximize the secrecy rate. By maximizing the average projection between the fully digital precoder and the hybrid precoder, we propose a low-complexity closed-form hybrid precoder. We extend the conventional projected maximum ratio transmission scheme to realize the hybrid precoder. Moreover, we propose an iterative hybrid precoder design to maximize the secrecy rate.With partial channel knowledge at transmitter, we derive a secrecy outage probability upper-bound. The secrecy throughput maximization is converted into a sequence of secrecy outage probability minimization problems. Then, the hybrid precoder is designed to minimize the secrecy outage probability by an iterative hybrid precoder design. Performance results show the proposed hybrid precoders achieve performance close to that of the fully digital precoding at low and moderate signal-to-noise ratios (SNRs), and sometimes at high SNRs depending on the system parameters. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email