Printed electronics is attracting a great deal of attention in both research and commercialization as it enables fabrication of large‐scale, low‐cost electronic devices on a variety of substrates. Printed electronics plays a critical role in facilitating widespread flexible electronics and more recently stretchable electronics. Conductive nanomaterials, such as metal nanoparticles and nanowires, carbon nanotubes, and graphene, are promising building blocks for printed electronics. Nanomaterial‐based printing technologies, formulation of printable inks, post‐printing treatment, and integration of functional devices have progressed substantially in the recent years. This review summarizes basic principles and recent development of common printing technologies, formulations of printable inks based on conductive nanomaterials, deposition of conductive inks via different printing techniques, and performance enhancement by using various sintering methods. While this review places emphasis on conductive nanomaterials, the printing techniques and ink formulations can be applied to other materials such as semiconducting and insulating nanomaterials. Moreover, some applications of printed flexible and stretchable electronic devices are reviewed to illustrate their potential. Finally, the future challenges and prospects for printing conductive nanomaterials are discussed.
- Award ID(s):
- 1809289
- PAR ID:
- 10063286
- Date Published:
- Journal Name:
- World Congress on Micro and Nano Manufacturing
- Page Range / eLocation ID:
- 4
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Abstract -
Sintering of nanoparticles deposited onto rigid or flexible substrate is required for many devices that use continuous and patterned thin films. An emerging need in this area is to perform nanoparticle sintering under ambient conditions, at high speeds, and with throughput that is compatible with high speed nanoparticle deposition techniques. Intense Pulsed Light sintering (IPL) uses a high energy, broad area and broad spectrum beam of xenon lamp light to sinter metallic and non-metallic nanoparticles. The capability of IPL to meet the above needs has been demonstrated. This paper experimentally examines temperature evolution and densification during IPL. It is shown, for the first time, that temperature rise and densification in IPL are related to each other. A coupled optical-thermal-sintering model on the nanoscale is developed, to understand this phenomenon. This model is used to show that the change in nanoscale shape of the nanoparticle ensemble due to sintering, reduces the optically induced heating as the densification proceeds, which provides a better explanation of experimental observations as compared to current models of IPL. The implications of this new understanding on the performance of IPL are also discussed.more » « less
-
more » « less
Currently, bioresorbable electronic devices are predominantly fabricated by complex and expensive vacuum‐based integrated circuit (IC) processes. Here, a low‐cost manufacturing approach for bioresorbable conductors on bioresorbable polymer substrates by evaporation–condensation‐mediated laser printing and sintering of Zn nanoparticle is reported. Laser sintering of Zn nanoparticles has been technically difficult due to the surface oxide on nanoparticles. To circumvent the surface oxide, a novel approach is discovered to print and sinter Zn nanoparticle facilitated by evaporation–condensation in confined domains. The printing process can be performed on low‐temperature substrates in ambient environment allowing easy integration on a roll‐to‐roll platform for economical manufacturing of bioresorbable electronics. The fabricated Zn conductors show excellent electrical conductivity (≈1.124 × 106S m−1), mechanical durability, and water dissolvability. Successful demonstration of strain gauges confirms the potential application in various environmentally friendly sensors and circuits.
-
Flexible electronics on low-temperature substrates like paper are very appealing for their use in disposable and biocompatible electronic applications and areas like healthcare, wearables, and consumer electronics. Plasma-jet printing uses a dielectric barrier discharge plasma to focus aerosolized nanoparticles onto a target substrate. The same plasma can be used to change the properties of the printed material and even sinter in situ . In this work, we demonstrate one-step deposition of gold structures onto flexible and low-temperature substrates without the need for thermal or photonic post-processing. We also explore the plasma effect on the deposition of the gold nanoparticle ink. The plasma voltage is optimized for the sintering of the gold nanoparticles, and a simple procedure for manufacturing traces with increased adhesion and conductivity is presented, with a peak conductivity of 6.2 x10 5 S/m. PJP-printed gold LED interconnects and microheaters on flexible substrates are developed to demonstrate the potential of this single-step sintered deposition of conductive traces on low-temperature substrates.more » « less
-
more » « less
Abstract Direct printing of functional materials, structures, and devices on various platforms such as flexible to rigid substrates is of interest for applications ranging from electronics to energy and sensing to biomedical devices. Current additive manufacturing (AM) and printing processes are either limited by the available sources of functional materials or require to be in the form of precisely designed inks. Here, a novel laser‐based additive nanomanufacturing (ANM) system capable of in situ and on‐demand generations of nanoparticles that can serve as nanoscale building blocks for real‐time sintering and dry printing a variety of multifunctional materials and patterns at atmospheric pressure and room temperature is reported. The ability to print different functional materials on various rigid and flexible platforms is shown. This nonequilibrium process involves pulsed laser ablation of targets and in situ formation of pure amorphous nanoparticles’ stream that are guided through a nozzle onto the surface of the substrate, where they are sintered/crystallized in real‐time. Further, the process–structure relationship of the printed materials from nanoscale to microscale is shown. This new ANM concept opens up an opportunity for printing advanced functional materials and devices on rigid and flexible substrates that can be employed both on the earth and in space.
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Conference Paper:
- The DOI is not currently available.
