skip to main content


Title: Advancements in the treatment and processing of electronic waste with sustainability: a review of metal extraction and recovery technologies
The amount of electronic waste (e-waste) globally has doubled in just five years, from approximately 20 million tons to 40 million tons of e-waste generated per year. In 2016, the global amount of e-waste reached an all-time high of 44.7 million tons. E-waste is an invaluable unconventional resource due to its high metal content, as nearly 40% of e-waste is comprised of metals. Unfortunately, the rapid growth of e-waste is alarming due to severe environmental impacts and challenges associated with complex resource recovery that has led to the use of toxic chemicals. Furthermore, there is a very unfortunate ethical issue related to the flow of e-wastes from developed countries to developing countries. At this time, e-waste is often open pit burned and toxic chemicals are used without adequate regulations to recover metals such as copper. The recovered metals are eventually exported back to the developed countries. Thus, the current global circular economy of e-waste is not sustainable in terms of environmental impact as well as creation of ethical dilemmas. Although traditional metallurgical processes can be extended to e-waste treatment technologies, that is not enough. The complexity of e-waste requires the development of a new generation of metallurgical processes that can separate and extract metals from unconventional components such as polymers and a wide range of metals. This review focuses on the science and engineering of both conventional and innovative separation and recovery technologies for e-wastes with special attention being given to the overall sustainability. Physical separation processes, including disassembly, density separation, and magnetic separation, as well as thermal treatment of the polymeric component, such as pyrolysis, are discussed for the separation of metals and non-metals from e-wastes. The subsequent metal recovery processes through pyrometallurgy, hydrometallurgy, and biometallurgy are also discussed in depth. Finally, insights on future research towards sustainable treatment and recovery of e-waste are presented including the use of supercritical CO 2 .  more » « less
Award ID(s):
1706905
NSF-PAR ID:
10121158
Author(s) / Creator(s):
; ; ;
Date Published:
Journal Name:
Green Chemistry
Volume:
21
Issue:
5
ISSN:
1463-9262
Page Range / eLocation ID:
919 to 936
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Abstract

    If the material intensive enterprises in an urban area of several million people shared physical resources that might otherwise be wasted, what environmental and public benefits would result? This study develops an algorithm based on lifecycle assessment tools for determining a city’sindustrial symbiosis potential—that is, the sum of the wastes and byproducts from a city’s industrial enterprises that could reasonably serve as resource inputs to other local industrial processes. Rather than report, as do many previous papers, on private benefits to firms, this investigation focuses on public benefits to cities by converting the maximum quantity of resources recoverable by local enterprises into an estimate of the capacity of municipal infrastructure conserved in terms of landfill space and water demand. The results here test this novel approach for the district of Mysuru (Mysore), India. We find that the industrial symbiosis potential calculated based on analysis of the inputs and outputs of ∼1000 urban enterprises, translates into 84 000 tons of industrial waste, greater than 74 000 tons of CO2e, and 22 million liters per day of wastewater. The method introduced here demonstrates how industrial symbiosis links private production and public infrastructure to improve the resource efficiency of a city by creating an opportunity to extend the capacity of public infrastructure and generate public health co-benefits.

     
    more » « less
  2. On August 9-10, 2023, the Thomas J. O’Keefe Institute for Sustainable Supply of Strategic Minerals at Missouri University of Science and Technology (Missouri S&T) hosted the third annual workshop on ‘Resilient Supply of Critical Minerals’. The workshop was funded by the National Science Foundation (NSF) and was attended by 218 participants. 128 participants attended in-person in the Havener Center on the Missouri S&T campus in Rolla, Missouri, USA. Another 90 participants attended online via Zoom. Fourteen participants (including nine students) received travel support through the NSF grant to attend the conference in Rolla. Additionally, the online participation fee was waived for another six students and early career researchers to attend the workshop virtually. Out of the 218 participants, 190 stated their sectors of employment during registration showing that 87 participants were from academia (32 students), 62 from the private sector and 41 from government agencies. Four topical sessions were covered: A. The Critical Mineral Potential of the USA: Evaluation of existing, and exploration for new resources. B. Mineral Processing and Recycling: Maximizing critical mineral recovery from existing production streams. C. Critical Mineral Policies: Toward effective and responsible governance. D. Resource Sustainability: Ethical and environmentally sustainable supply of critical minerals. Each topical session was composed of two keynote lectures and complemented by oral and poster presentations by the workshop participants. Additionally, a panel discussion with panelists from academia, the private sector and government agencies was held that discussed ‘How to grow the American critical minerals workforce’. The 2023 workshop was followed by a post-workshop field trip to the lead-zinc mining operations of the Doe Run Company in southeast Missouri that was attended by 18 workshop participants from academia (n=10; including 4 students), the private sector (n=4), and government institutions (n=4). Discussions during the workshop led to the following suggestions to increase the domestic supply of critical minerals: (i) Research to better understand the geologic critical mineral potential of the USA, including primary reserves/resources, historic mine wastes, and mineral exploration potential. (ii) Development of novel extraction techniques targeted at the recovery of critical minerals as co-products from existing production streams, mine waste materials, and recyclables. (iii) Faster and more transparent permitting processes for mining and mineral processing operations. (iv) A more environmentally sustainable and ethical approach to mining and mineral processing. (v) Development of a highly skilled critical minerals workforce. This workshop report provides a detailed summary of the workshop discussions and describes a way forward for this workshop series for 2024 and beyond. 
    more » « less
  3. As rates of textile manufacturing and disposal escalate, the ramifications to health and the environment through water pollution, microplastic contaminant concentrations, and greenhouse gas emissions increases. Discarding over 15.4 million tons of textiles each year, the U.S. recycles less than 15%, sending the remainder to landfills and incinerators. Textile reuse is not sufficient to de-escalate the situation; recycling is necessary. Most textile recycling technologies from past decades are expensive, create low quality outputs, or are not industry scalable. For viability, textile recycling system designs must evolve with the rapid pace of a dynamic textile and fashion industry. For any design to be sustainable, it must also be flexible to adapt with technological, user, societal, and environmental condition advances. To this end flexible and sustainable design principles were compared: overlapping principles were combined and missing principles were added to create twelve overarching sustainable, flexible design principles (DfSFlex). The Fiber Shredder was designed and built with flexibility and sustainability as its goal and evaluated on how well it met DfSFlex principles. An evaluation of the Fiber Shredder's performance found that increased speed and processing time increases the generation of the desired output - fibers and yarns, manifesting the principles of Design for Separation in design and Facilitate Resource Recovery in processing. The development of this technology, with the application of sustainable and flexible design, fiber-to-fiber recycling using mechanical systems appears promising for maintaining value while repurposing textiles. 
    more » « less
  4. Due to the rapid development of electronic devices and their shortened lifespans, waste electrical and electronic equipment (WEEE), or E-waste, is regarded as one of the most fast-growing wastes. Among the categories of E-waste, waste printed circuit boards (WPCBs) are considered the most complex waste materials, owing to their various constitutes, such as plastics, capacitors, wiring, and metal plating. To date, a variety of processing technologies have been developed and studied. However, due to the heterogeneous nature of WPCBs, a thorough study on both material characterization and physical separation was needed to provide a better understanding in material handling, as well as to prepare a suitable feedstock prior to the downstream chemical process. In the present study, integrated size and density separations were performed to understand the liberation of contained metals, particularly Cu and Au, from the plastic substrates. The separation performance was evaluated by the elemental concentration, distribution, and enrichment ratio of valuable metals in different size and density fractions. Further, SEM-EDS on the density separation products was carried out to characterize the surface morphology, elemental mapping, and quantified elemental contents. Moreover, thermo-gravimetric properties of waste PCBs were investigated by TGA, in order to understand the effect of temperature on volatile and combustible fractions during the thermal processing. 
    more » « less
  5. null (Ed.)
    Sustainable transition to low carbon and zero waste economy requires a macroscopic evaluation of opportunities and impact of adopting emerging technologies in a region. However, a full assessment of current physical flows and wastes is a tedious task, thus leading to lack of comprehensive assessment before scale up and adoption of emerging technologies. Utilizing the mechanistic models developed for engineering and biological systems with macroeconomic framework of Input-Output models, we propose a novel integrated approach to fully map the physical economy, that automates the process of mapping industrial flows and wastes in a region. The approach is demonstrated by mapping the agro-based physical economy of the state of Illinois, USA by using mechanistic models for 10 sectors, which have high impact on waste generation. Each model mechanistically simulates the material transformation processes in the economic sector and provides the material flow information for mapping. The model for physical economy developed in the form of a Physical Input-Output Table (PIOT) captures the interindustry physical interactions in the region and waste flows, thus providing insights into the opportunities to implement circular economy strategies i.e., adoption of recycling technologies at large scale. In Illinois, adoption of technologies for industrial waste-water & hog manure recycling will have the highest impact by reducing > 62 % of hog industry waste, > 99 % of soybean hull waste, and > 96 % of dry corn milling (corn ethanol production) waste reduction. Small % reduction in fertilizer manufacturing waste was also observed. The physical economy model revealed that Urea sector had the highest material use of 5.52E+08 tons and green bean farming with lowest material use of 1.30E+05 tons for the year modeled (2018). The mechanistic modeling also allowed to capture elemental flows across the physical economy with Urea sector using 8.25E+07 tons of carbon per operation-year (highest) and bean farming using 3.90E+04 tons of elemental carbon per operation-year (least). The approach proposed here establishes a connection between engineering and physical economy modeling community for standardizing the mapping of physical economy that can provide insights for successfully transitioning to a low carbon and zero waste circular economy. 
    more » « less