An official website of the United States government
Optical isolators are an essential component of photonic systems. Current integrated optical isolators have limited bandwidths due to stringent phase-matching conditions, resonant structures, or material absorption. Here, we demonstrate a wideband integrated optical isolator in thin-film lithium niobate photonics. We use dynamic standing-wave modulation in a tandem configuration to break Lorentz reciprocity and achieve isolation. We measure an isolation ratio of 15 dB and insertion loss below 0.5 dB for a continuous wave laser input at 1550 nm. In addition, we experimentally show that this isolator can simultaneously operate at visible and telecom wavelengths with comparable performance. Isolation bandwidths up to ∼100 nm can be achieved simultaneously at both visible and telecom wavelengths, limited only by the modulation bandwidth. Our device’s dual-band isolation, high flexibility, and real-time tunability can enable novel non-reciprocal functionality on integrated photonic platforms.
more »
« less
Plasmonic and photonic isolators based on the spatiotemporal modulation of graphene
We explore the possibilities enabled by the spatiotemporal modulation of graphene’s conductivity to realize magnetic-free isolators at terahertz and infrared frequencies. To this purpose, graphene is loaded with periodically distributed gates that are time-modulated. First, we investigate plasmonic isolators based on various mechanisms such as symmetric bandgaps and interband photonic transitions and we demonstrate isolation levels over 30 dB using realistic biasing schemes. To lessen the dependence on high-quality graphene able to support surface plasmons with low damping, we then introduce a hybrid photonic platform based on spatiotemporally modulated graphene coupled to high-Q modes propagating on dielectric waveguides. We exploit transversal Fabry-Perot resonances appearing due to the finite-width of the waveguide to significantly boost graphene/waveguide interactions and to achieve isolation levels over 50 dB in compact structures modulated with low biasing voltages. The resulting platform is CMOS-compatible, exhibits an overall loss below 4 dB, and is robust against graphene imperfections. We also put forward a theoretical framework based on coupled-mode theory and on solving the eigenstates of the modulated structure that is in excellent agreement with full-wave numerical simulations, sheds light in the underlying physics that govern the proposed isolators, and speeds-up their analysis and design. We envision that the proposed technology will open new and efficient routes to realize integrated and silicon compatible isolators, with wide range of applications in communications and photonic networks.
more »
« less
- Award ID(s):
- 1749177
- PAR ID:
- 10156087
- Date Published:
- Journal Name:
- Micro- and Nanotechnology Sensors, Systems, and Applications XI, edited by Thomas George, M. Saif Islam, Proc. of SPIE
- Volume:
- 10982
- Issue:
- 109821I
- Page Range / eLocation ID:
- 53
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Nonreciprocal magnon propagation has recently become a highly potential approach of developing chip-embedded microwave isolators for advanced information processing. However, it is challenging to achieve large nonreciprocity in miniaturized magnetic thin-film devices because of the difficulty of distinguishing propagating surface spin waves along the opposite directions when the film thickness is small. In this work, we experimentally realize unidirectional microwave transduction with sub-micrometer-wavelength propagating magnons in a yttrium iron garnet (YIG) thin-film delay line. We achieve a non-decaying isolation of 30 dB with a broad field-tunable bandpass frequency range up to 14 GHz. The large isolation is due to the selection of chiral magnetostatic surface spin waves with the Oersted field generated from the coplanar waveguide antenna. Increasing the geometry ratio between the antenna width and YIG thickness drastically reduces the nonreciprocity and introduces additional magnon transmission bands. Our results pave the way for on-chip microwave isolation and tunable delay line with short-wavelength magnonic excitations.more » « less
-
We propose a novel photonic circuit element configuration that emulates the through-port response of a bus coupled traveling-wave resonator using two standing-wave resonant cavities. In this “reflectionless resonator unit”, the two constituent cavities, here photonic crystal (PhC) nanobeams, exhibit opposite mode symmetries and may otherwise belong to a single design family. They are coupled evanescently to the bus waveguide without mutual coupling. We show theoretically, and verify using FDTD simulations, that reflection is eliminated when the two cavities are wavelength aligned. This occurs due to symmetry-induced destructive interference at the bus coupling region in the proposed photonic circuit topology. The transmission is equivalent to that of a bus-coupled traveling-wave (e.g. microring) resonator for all coupling conditions. We experimentally demonstrate an implementation fabricated in a new 45 nm silicon-on-insulator complementary metal-oxide semiconductor (SOI CMOS) electronic-photonic process. Both PhC nanobeam cavities have a full-width half-maximum (FWHM) mode length of 4.28μm and measured intrinsic Q’s in excess of 200,000. When the resonances are tuned to degeneracy and coalesce, transmission dips of the over-coupled PhC nanobeam cavities of −16 dB and −17 dB nearly disappear showing a remaining single dip of −4.2 dB, while reflection peaks are simultaneously reduced by 10 dB, demonstrating the quasi-traveling-wave behavior. This photonic circuit topology paves the way for realizing low-energy active devices such as modulators and detectors that can be cascaded to form wavelength-division multiplexed links with smaller power consumption and footprint than traveling wave, ring resonator based implementations.more » « less
-
We demonstrate a low power thermally induced optical bistability at telecom wavelengths and room temperature using a nanobeam photonic crystal cavity embedded with an ensemble of quantum dots. The nanobeam photonic crystal cavity is transfer-printed onto the edge of a carrier chip for thermal isolation of the cavity with an efficient optical coupling between the nanobeam waveguide and optical setup. Reflectivity measurements performed with a tunable laser reveal the thermo-optic nature of the nonlinearity. A bistability power threshold as low as 23 μW and an on/off response contrast of 6.02 dB are achieved from a cavity with a moderately low quality factor of 2830. Our device provides optical bistability at power levels an order of magnitude lower than previous quantum-dot-based devices.more » « less
-
Abstract The generation of ultra-low-noise microwave and mmWave in miniaturized, chip-based platforms can transform communication, radar and sensing systems1–3. Optical frequency division that leverages optical references and optical frequency combs has emerged as a powerful technique to generate microwaves with superior spectral purity than any other approaches4–7. Here we demonstrate a miniaturized optical frequency division system that can potentially transfer the approach to a complementary metal-oxide-semiconductor-compatible integrated photonic platform. Phase stability is provided by a large mode volume, planar-waveguide-based optical reference coil cavity8,9and is divided down from optical to mmWave frequency by using soliton microcombs generated in a waveguide-coupled microresonator10–12. Besides achieving record-low phase noise for integrated photonic mmWave oscillators, these devices can be heterogeneously integrated with semiconductor lasers, amplifiers and photodiodes, holding the potential of large-volume, low-cost manufacturing for fundamental and mass-market applications13.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Conference Paper:
- https://doi.org/10.1117/12.2519237
