An official website of the United States government
Abstract Perovskite optoelectronics are regarded as a disruptive technology, but their susceptibility to environmental degradation and reliance on toxic solvents in traditional processing methods pose significant challenges to their practical implementation. Herein, methylammonium lead iodide (MAPbI3) perovskite films processed via a solvent‐free laser printing technique, that exhibit exceptional stability, are reported. These films withstand extreme conditions, including high doses of X‐ray radiation exceeding 200 Gy, blue laser illumination, 90% relative humidity, and thermal stress up to 80 °C for over 300 min in air. We demonstrate that laser‐printed films maintain their structural integrity and optoelectronic properties even after prolonged exposure to these stressors, significantly surpassing the stability of conventionally processed films. The enhanced stability is attributed to the unique film formation mechanism and resulting defect‐tolerant microstructure. These results underscore the potential of laser printing as a scalable, safe, and sustainable manufacturing route for producing stable perovskite‐based devices with potential applications in diverse fields, ranging from renewable energy to large‐area electronics and space exploration.
more »
« less
Laser printed metal halide perovskites
Abstract Hybrid organic–inorganic perovskites enable the production of semiconductor devices at low cost from solution processing. Their remarkable structural versatility offers unique and diverse physical properties, leading to their incorporation in a wide variety of applications. One major limitation is the significant negative environmental impact associated with developing perovskite devices; common solvents used in perovskite film deposition are highly toxic, which represents a barrier to the transfer to an industrial setting of the perovskite technology. Here we report on the fabrication and characterisation of the first laser printed organic–inorganic perovskite films. The method is solvent-free, scalable and low-cost, allowing fast deposition over large areas and with minimal material waste. We show that the laser printed perovskite films are crystalline and exhibit electrical properties on par with single crystals, despite the fact that the microstructure consists of randomly oriented crystallites. The toner used during printing is designed for optimal film transfer and the vertical separation of its components results in a segregation of the perovskite film in the middle of the stack, therefore also encapsulating the perovskite layer, a process that yields a remarkable resilience to defect formation upon environmental exposure.
more »
« less
- Award ID(s):
- 1824674
- PAR ID:
- 10166418
- Publisher / Repository:
- IOP Publishing
- Date Published:
- Journal Name:
- Journal of Physics: Materials
- Volume:
- 3
- Issue:
- 3
- ISSN:
- 2515-7639
- Page Range / eLocation ID:
- Article No. 034010
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Hybrid perovskites incorporating conjugated organic cations enable unusual charge carrier interactions among organic and inorganic structural components, but are difficult to prepare as films due to disparate component chemical/physical characteristics ( e.g. , solubility, thermal stability). Here we demonstrate that resonant infrared matrix-assisted pulsed laser evaporation (RIR-MAPLE) mitigates these challenges, enabling facile deposition of lead-halide-based perovskite films incorporating variable-length oligothiophene cations. Density functional theory (DFT) predicts suitable organic and inorganic moieties that form quantum-well-like structures with targeted luminescence or exciton separation/quenching. RIR-MAPLE-deposited films enable confirmation of these predictions by optical measurements, which further display excited state behavior transcending traditional quantum-well models— i.e. , with appropriate selection of specially synthesized organic/inorganic moieties, intercomponent carrier transfer efficiently converts excitons from singlet to triplet states in organics for which intersystem crossing cannot ordinarily compete with recombination. These observations demonstrate the uniquely versatile excited-state behavior in hybrid perovskite quantum wells, and the value of integrating DFT, organic synthesis, RIR-MAPLE and spectroscopy for screening/preparing rationally devised complex structures.more » « less
-
Abstract The surface composition of perovskite films is very sensitive to film processing and can deviate from the optimal, which generates unfavorable defects and results in efficiency loss in solar cells and slow response speed in photodetectors. An argon plasma treatment is introduced to modify the surface composition by tuning the ratio of organic and inorganic components as well as defect type before deposition of the passivating layer. It can efficiently enhance the charge collection across the perovskite–electrode interface by suppressing charge recombination. Therefore, perovskite solar cells with argon plasma treatment yield enhanced efficiency to 20.4% and perovskite photodetectors can reach their fastest respond speed, which is solely limited by the carrier mobility.more » « less
-
Abstract The high transmission speed of optical signals and their application in optical computation have created a growing demand for photon‐programmed memory devices. Rather than using electrical pulses to store data in one of two states, the photomemory (PM) devices exploit the optical stimulation to store the light information. In this work, the application of a nonvolatile rewritable PM array using the photochromic inorganic perovskite CsPbIBr2grown by a vapor‐deposition process is demonstrated. Reversible phase transitions between orthorhombic (δ) and cubic (α) phases are achieved in CsPbIBr2films through laser‐induced heat and moisture exposure. The PM pixels in an optically absorbing perovskite phase exhibit ≈50‐fold photoresponsivity as large as those in a transparent‐colored non‐perovskite phase. Storing optical data are achieved by heating pixels through a near‐infrared laser, while moisture exposure is used to erase the stored information. The nonvolatile PM array exhibits great write‐read‐erase cycle endurance and data retention capability without obvious performance degradation after storage in air for one week. This work demonstrates the promising application of vapor‐deposited inorganic perovskite for optical information storage and the unique potential of them for use in optical switches, tunable metasurfaces, and many other applications.more » « less
-
Hybrid perovskite materials have emerged as excellent candidates for next-generation optoelectronic applications. Nevertheless, many vapor deposition techniques face challenges like phase segregation, thermal decomposition, and nonstoichiometric film growth. Resonant infrared matrix-assisted pulsed laser evaporation (RIR-MAPLE) addresses these challenges by eliminating thermal stability concerns for precursor materials while maintaining stoichiometry and producing high-quality film growth. Despite its advantages, scaling up RIR-MAPLE remains underexplored compared to conventional techniques. A main challenge is to ensure high throughput with precise control over film properties. RIR-MAPLE films are typically grown under an active vacuum (chamber pressure of ∼10−5 Torr). Film deposition under background gas pressure has not been investigated, leaving questions about how an inert gas environment could influence material properties. Thus, understanding film deposition in a reduced vacuum environment with background inert gas, such as nitrogen gas, is crucial to demonstrate the feasibility of higher throughput to achieve industrial scalability. This study examines the effect of nitrogen background pressure on the deposition of two-dimensional hybrid perovskite films, namely, phenethylammonium lead iodide revealing significant improvements in film crystallinity, optical properties, and defect density with increasing background pressure, thereby highlighting the potential for scaling RIR-MAPLE for the synthesis of high-performance hybrid perovskite films.more » « less
