The resurgence of oil and gas extraction in the Appalachian Basin has resulted in an excess of oil and gas brines in Pennsylvania, West Virginia, and Ohio. Primarily driven by unconventional development, this expansion has also impacted conventional wells and consequently, created economic pressure to develop effective and cheap disposal options. Using brine as a road treatment, directly or as a processed deicer, however, creates substantial concern that naturally occurring radioactive material in the brines can contaminate roads and road-side areas. Current decision making is based on risk exposure scenarios developed by regulatory agencies based on recreational users in rural areas and exposures to drivers during a typical commute. These scenarios are not appropriate for evaluating exposures to residential deicer users or people living near treated streets. More appropriate exposure scenarios were developed in this work and exposures predicted with these models based on laboratory measurements and literature data. Exposure scenarios currently used for regulatory assessment of brine road treatment result in predicted exposures of 0.4–0.6 mrem/year. Residential exposures predicted by the scenarios developed in this work are 4.6 mrem/year. If the maximum range of near-road soil radium concentrations observed in the region is used in this residential scenario (60 pCi/g226Ra, 50 pCi/g228Ra), residents living near these roads would be exposed to an estimated 296 mrems/year, above regulatory exposure thresholds used in nuclear facility siting assessments. These results underline the urgent need to clarify exposure risks from the use of oil and gas brines as a road treatment, particularly given the existing disparities in the distribution of road impacts across socioeconomic status.
- Award ID(s):
- 1703412
- NSF-PAR ID:
- 10180302
- Date Published:
- Journal Name:
- Environmental Science: Processes & Impacts
- Volume:
- 22
- Issue:
- 5
- ISSN:
- 2050-7887
- Page Range / eLocation ID:
- 1224 to 1232
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Abstract -
Hydraulic fracturing of deep shale formations generates large volumes of wastewater that must be managed through treatment, reuse, or disposal. Produced wastewater liberates formation-derived radionuclides and contains previously uncharacterized organohalides thought to be generated within the shale well, both posing unknown toxicity to human and ecological health. Here, we assess the toxicity of 42 input media and produced fluid samples collected from four wells in the Utica formation and Marcellus Shale using two distinct endpoint screening assays. Broad spectrum acute toxicity was assessed using a bioluminescence inhibition assay employing the halotolerant bacterium Aliivibrio fischeri , while predictive mammalian cytotoxicity was evaluated using a N -acetylcysteine (NAC) thiol reactivity assay. The acute toxicity and thiol reactivity of early-stage flowback was higher than later produced fluids, with levels diminishing through time as the natural gas wells matured. Acute toxicity of early stage flowback and drilling muds were on par with the positive control, 3,5-dichlorophenol (6.8 mg L −1 ). Differences in both acute toxicity and thiol reactivity between paired natural gas well samples were associated with specific chemical additives. Samples from wells containing a larger diversity and concentration of organic additives resulted in higher acute toxicity, while samples from a well applying a higher composition of ammonium persulfate, a strong oxidizer, showed greater thiol reactivity, predictive of higher mammalian toxicity. Both acute toxicity and thiol reactivity are consistently detected in produced waters, in some cases present up to nine months after hydraulic fracturing. These results support that specific chemical additives, the reactions generated by the additives, or the constituents liberated from the formation by the additives contribute to the toxicity of hydraulic fracturing produced waters and reinforces the need for careful consideration of early produced fluid management.more » « less
-
more » « less
Abstract Decades of research have resulted in characterization of the ocean floor manifestations of mid‐ocean ridge (MOR) hydrothermal systems, yet numerical models accounting for the connections between heat transfer, hydrology and geochemistry have been slow to develop. The Thermo‐hydro‐chemical code ToughReact can be used to describe the coupled effects of fluid flow, heat transfer, and fluid‐rock chemical interactions that occur in MOR systems. We describe the results of 2‐dimensional simulations of steady state flow in fractured diabase with mineral‐fluid chemical reactions. Basal heating and specified permeability yield maximum temperature of 400°C. Total fluid flux and high fracture flow velocities are in accord with observations. Fluid chemistry, mineralogical changes and87Sr/86Sr ratios can be compared to observations to assess and calibrate models. Simulated high temperature fracture fluids have Mg and SO4near zero, elevated Ca and87Sr/86Sr of about 0.7040. Total alteration is 10%–50% for simple models of spreading. Anhydrite forms mainly near the base of the upwelling zone and results in substantial local fracture porosity reduction. A calibrated model is used to predict how Sr isotopes and other features of altered oceanic crust would be different in the Cretaceous (95 Ma) early Proterozoic (1,800 Ma) and Archean (3,800 Ma), when seawater may have had high Ca and Sr concentrations, lower pH, higher temperature, and lower Na, Mg, and SO4. The simulations are offered as a start on what ultimately may require a longer‐term community effort to better understand the role of MOR thermo‐hydro‐chemical systems in Earth evolution.
-
more » « less
Abstract Recent advances in shale gas development have largely outpaced efforts to manage associated waste streams that pose significant environmental risks. Wastewater management presents significant challenges in the Marcellus shale, where increasing fluid volumes concomitant with expanding development will threaten to overwhelm existing infrastructure over the next decade. In this work, we forecast growth in drilling, flowback, and produced fluid volumes through 2025 based on historic data and consider conventional and alternative disposal options to meet future demands. The results indicate that nearly 12 million m3(74 MMbbl) of wastewater will be generated annually by 2025. Even assuming wastewater recycling rates in the region rebound, meeting increased demands for wastewater that cannot be reused due to poor quality or logistics would require significant capital investment to expand existing disposal pathways, namely treatment and discharge at centralized facilities or dedicated brine injection in Ohio. Here, we demonstrate the logistical and environmental advantages of an alternative strategy: repurposing depleted oil and gas wells for dedicated injection of wastewater that cannot otherwise be reused or recycled. Hubs of depleted wells could accommodate projected increases in wastewater volumes more efficiently than existing disposal options, primarily because the proximity of depleted wells to active production sites would substantially reduce wastewater transport distances and associated costs. This study highlights the need to reevaluate regional-scale shale wastewater management practices in the context of evolving wastewater qualities and quantities, as strategic planning will result in more socially and economically favorable options while avoiding adverse environmental impacts that have overshadowed the environmental benefits of natural gas expansion in the energy sector.
-
more » « less
The amount of radon in natural gas varies with its source. Little has been published about the radon from shale gas to date, making estimates of its impact on radon‐induced lung cancer speculative. We measured radon in natural gas pipelines carrying gas from the Marcellus Shale in Pennsylvania and West Virginia. Radon concentrations ranged from 1,520 to 2,750 Bq/m3(41–74 pCi/L), and the throughput‐weighted average was 1,983 Bq/m3(54 pCi/L). Potential radon exposure due to the use of Marcellus Shale gas for cooking and space heating using vent‐free heaters or gas ranges in northeastern U.S. homes and apartments was assessed. Though the measured radon concentrations are higher than what has been previously reported, it is unlikely that exposure from natural gas cooking would exceed 1.2 Bq/m3(<1% of the U.S. Environmental Protection Agency's action level). Using worst‐case assumptions, we estimate the excess lifetime (70 years) lung cancer risk associated with cooking to be 1.8×10−4(interval spanning 95% of simulation results: 8.5×10−5, 3.4×10−4). The risk profile for supplemental heating with unvented gas appliances is similar. Individuals using unvented gas appliances to provide primary heating may face lifetime risks as high as 3.9×10−3. Under current housing stock and gas consumption assumptions, expected levels of residential radon exposure due to unvented combustion of Marcellus Shale natural gas in the Northeast United States do not result in a detectable change in the lung cancer death rates.
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1039/D0EM00066C
