skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.


Title: Terahertz investigation of bound states in the continuum of metallic metasurfaces
The concept of “bound states in the continuum” (BIC) describes an idealized physical system exhibiting zero radiative loss composed, for example, of an infinitely extended array of resonators. In principle, vanishing of radiative losses enables an infinitely high-quality factor and corresponding infinite lifetime of the resonance. As such, BIC inspired metasurfaces and photonic designs aim to achieve superior performance in various applications including sensing and lasing. We describe an analytical model based on temporal coupled mode theory to realize an “accidental” (i.e., parameter-tuned) Friedrich–Wintgen BIC. Further, we experimentally verify this model with measurements of quasi-BICs in a metallic terahertz metasurface (MS) and the corresponding complementary metasurface (CMS) using terahertz time domain spectroscopy. For the MS and CMS structures, quality factors of ∼<#comment/> 20 are achieved, limited by non-radiative intrinsic loss in the materials. Our results reveal that Babinet’s principle qualitatively holds for the MS and CMS quasi-BIC structures. In addition, ultra-high electric and magnetic field enhancement MS and CMS structures, respectively, are presented.  more » « less
Award ID(s):
1810252
PAR ID:
10200230
Author(s) / Creator(s):
; ; ; ; ; ;
Publisher / Repository:
Optical Society of America
Date Published:
Journal Name:
Optica
Volume:
7
Issue:
11
ISSN:
2334-2536
Format(s):
Medium: X Size: Article No. 1548
Size(s):
Article No. 1548
Sponsoring Org:
National Science Foundation
More Like this
  1. In this Letter, the electron-blocking-layer (EBL)-free AlGaN ultraviolet (UV) light-emitting diodes (LEDs) using a strip-in-a-barrier structure have been proposed. The quantum barrier (QB) structures are systematically engineered by integrating a 1 nm intrinsic A l x G a ( 1 −<#comment/> x ) N strip into the middle of QBs. The resulted structures exhibit significantly reduced electron leakage and improved hole injection into the active region, thus generating higher carrier radiative recombination. Our study shows that the proposed structure improves radiative recombination by ∼<#comment/> 220 %<#comment/> , reduces electron leakage by ∼<#comment/> 11 times, and enhances optical power by ∼<#comment/> 225 %<#comment/> at 60 mA current injection compared to a conventional AlGaN EBL LED structure. Moreover, the EBL-free strip-in-a-barrier UV LED records the maximum internal quantum efficiency (IQE) of ∼<#comment/> 61.5 %<#comment/> which is ∼<#comment/> 72 %<#comment/> higher, and IQE droop is ∼<#comment/> 12.4 %<#comment/> , which is ∼<#comment/> 333 %<#comment/> less compared to the conventional AlGaN EBL LED structure at ∼<#comment/> 284.5 n m wavelength. Hence, the proposed EBL-free AlGaN LED is the potential solution to enhance the optical power and produce highly efficient UV emitters. 
    more » « less
  2. Materials with strong second-order ( χ<#comment/> ( 2 ) ) optical nonlinearity, especially lithium niobate, play a critical role in building optical parametric oscillators (OPOs). However, chip-scale integration of low-loss χ<#comment/> ( 2 ) materials remains challenging and limits the threshold power of on-chip χ<#comment/> ( 2 ) OPO. Here we report an on-chip lithium niobate optical parametric oscillator at the telecom wavelengths using a quasi-phase-matched, high-quality microring resonator, whose threshold power ( ∼<#comment/> 30 µ<#comment/> W ) is 400 times lower than that in previous χ<#comment/> ( 2 ) integrated photonics platforms. An on-chip power conversion efficiency of 11% is obtained from pump to signal and idler fields at a pump power of 93 µW. The OPO wavelength tuning is achieved by varying the pump frequency and chip temperature. With the lowest power threshold among all on-chip OPOs demonstrated so far, as well as advantages including high conversion efficiency, flexibility in quasi-phase-matching, and device scalability, the thin-film lithium niobate OPO opens new opportunities for chip-based tunable classical and quantum light sources and provides a potential platform for realizing photonic neural networks. 
    more » « less
  3. Metasurfaces with dynamic optical performance have the potential to enable a broad range of applications. We computationally investigate the potential of dielectric Huygens metasurfaces, supporting both electric and magnetic dipole resonances, as a candidate platform for dynamic tuning. The asymmetric response of the two dipole resonances to changes in geometric and material parameters, and the potential for separate control of amplitude and phase, is analyzed. A review of dynamic materials, and their promise and limitations for use in dynamic Huygens metasurfaces, is discussed. Vanadium dioxide ( V O 2 ) is recognized as a singularly interesting material, due to its variable refractive index and optical absorption in response to several stimuli. Transmitted phase modulation of ±<#comment/> π<#comment/> is computationally demonstrated as a function of decaying resonance utilizing only the first 5% of the insulator-metal transition, corresponding to a temperature change of <<#comment/> 10 ∘<#comment/> C . As another case study utilizing asymmetric resonance tuning in response to changing incidence angle, phase modulation ( 2 π<#comment/> range for reflected light and ><#comment/> 1.5 π<#comment/> for transmitted light) and amplitude modulation (from R = 1 to T = 1 ) are demonstrated using a simple silicon metasurface with varying incident angle within a range of ∼<#comment/> 15 ∘<#comment/> on two axes. A promising implementation within a micro-electromechanical system (MEMS)-based spatial light modulator, similar to conventional digital micromirror devices, is discussed. 
    more » « less
  4. Amorphous tantala ( T a 2 O 5 ) thin films were deposited by reactive ion beam sputtering with simultaneous low energy assist A r + or A r + / O 2 + bombardment. Under the conditions of the experiment, the as-deposited thin films are amorphous and stoichiometric. The refractive index and optical band gap of thin films remain unchanged by ion bombardment. Around 20% improvement in room temperature mechanical loss and 60% decrease in absorption loss are found in samples bombarded with 100-eV A r + . A detrimental influence from low energy O 2 + bombardment on absorption loss and mechanical loss is observed. Low energy A r + bombardment removes excess oxygen point defects, while O 2 + bombardment introduces defects into the tantala films. 
    more » « less
  5. The mid-IR spectroscopic properties of E r 3 + doped low-phonon C s C d C l 3 and C s P b C l 3 crystals grown by the Bridgman technique have been investigated. Using optical excitations at ∼<#comment/> 800 n m and ∼<#comment/> 660 n m , both crystals exhibited IR emissions at ∼<#comment/> 1.55 , ∼<#comment/> 2.75 , ∼<#comment/> 3.5 , and ∼<#comment/> 4.5 µ<#comment/> m at room temperature. The mid-IR emission at 4.5 µm, originating from the 4 I 9 / 2 →<#comment/> 4 I 11 / 2 transition, showed a long emission lifetime of ∼<#comment/> 11.6 m s for E r 3 + doped C s C d C l 3 , whereas E r 3 + doped C s P b C l 3 exhibited a shorter lifetime of ∼<#comment/> 1.8 m s . The measured emission lifetimes of the 4 I 9 / 2 state were nearly independent of the temperature, indicating a negligibly small nonradiative decay rate through multiphonon relaxation, as predicted by the energy-gap law for low-maximum-phonon energy hosts. The room temperature stimulated emission cross sections for the 4 I 9 / 2 →<#comment/> 4 I 11 / 2 transition in E r 3 + doped C s C d C l 3 and C s P b C l 3 were determined to be ∼<#comment/> 0.14 ×<#comment/> 10 −<#comment/> 20 c m 2 and ∼<#comment/> 0.41 ×<#comment/> 10 −<#comment/> 20 c m 2 , respectively. The results of Judd–Ofelt analysis are presented and discussed. 
    more » « less