skip to main content


Title: Crystal structure characterization and electronic structure of a rare-earth-containing Zintl phase in the Yb–Al–Sb family: Yb 3 AlSb 3
A rare-earth-containing compound, ytterbium aluminium antimonide, Yb 3 AlSb 3 (Ca 3 AlAs 3 -type structure), has been successfully synthesized within the Yb–Al–Sb system through flux methods. According to the Zintl formalism, this structure is nominally made up of (Yb 2+ ) 3 [(Al 1− )( 1b – Sb 2− ) 2 ( 2b – Sb 1− )], where 1b and 2b indicate 1-bonded and 2-bonded, respectively, and Al is treated as part of the covalent anionic network. The crystal structure features infinite corner-sharing AlSb 4 tetrahedra, [AlSb 2 Sb 2/2 ] 6− , with Yb 2+ cations residing between the tetrahedra to provide charge balance. Herein, the synthetic conditions, the crystal structure determined from single-crystal X-ray diffraction data, and electronic structure calculations are reported.  more » « less
Award ID(s):
2001156 1709382
NSF-PAR ID:
10250592
Author(s) / Creator(s):
; ; ;
Date Published:
Journal Name:
Acta Crystallographica Section C Structural Chemistry
Volume:
77
Issue:
6
ISSN:
2053-2296
Page Range / eLocation ID:
281 to 285
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. null (Ed.)
    The Zintl phases, Yb 14 M Sb 11 ( M = Mn, Mg, Al, Zn), are now some of the highest thermoelectric efficiency p-type materials with stability above 873 K. Yb 14 MnSb 11 gained prominence as the first p-type thermoelectric material to double the efficiency of SiGe alloy, the heritage material in radioisotope thermoelectric generators used to power NASA’s deep space exploration. This study investigates the solid solution of Yb 14 Mg 1− x Al x Sb 11 (0 ≤ x ≤ 1), which enables a full mapping of the metal-to-semiconductor transition. Using a combined theoretical and experimental approach, we show that a second, high valley degeneracy ( N v = 8) band is responsible for the groundbreaking performance of Yb 14 M Sb 11 . This multiband understanding of the properties provides insight into other thermoelectric systems (La 3− x Te 4 , SnTe, Ag 9 AlSe 6 , and Eu 9 CdSb 9 ), and the model predicts that an increase in carrier concentration can lead to zT > 1.5 in Yb 14 M Sb 11 systems. 
    more » « less
  2. Thermoelectric materials can convert heat into electricity. They are used to generate electricity when other power sources are not available or to increase energy efficiency by recycling waste heat. The Yb 21 Mn 4 Sb 18 phase was previously shown to have good thermoelectric performance due to its large Seebeck coefficient (∼290 μV K −1 ) and low thermal conductivity (0.4 W m −1 K −1 ). These characteristics stem respectively from the unique [Mn 4 Sb 10 ] 22− subunit and the large unit cell/site disorder inherent in this phase. The solid solutions, Yb 21 Mn 4− x Cd x Sb 18 ( x = 0, 0.5, 1.0, 1.5) and Yb 21− y Ca y Mn 4 Sb 18 ( y = 3, 6, 9, 10.5) have been prepared, their structures characterized and thermoelectric properties from room temperature to 800 K measured. A detailed look into the structural disorder for the Cd and Ca solid solutions was performed using synchrotron powder X-ray diffraction and pair distribution function methods and shows that these are highly disordered structures. The substitution of Cd gives rise to more metallic behavior whereas Ca substitution results in high resistivity. As both Cd and Ca are isoelectronic substitutions, the changes in properties are attributed to changes in the electronic structure. Both solid solutions show that the thermal conductivities remain extremely low (∼0.4 W m −1 K −1 ) and that the Seebeck coefficients remain high (>200 μV K −1 ). The temperature dependence of the carrier mobility with increased Ca substitution, changing from approximately T −1 to T −0.5 , suggests that another scattering mechanism is being introduced. As the bonding changes from polar covalent with Yb to ionic for Ca, polar optical phonon scattering becomes the dominant mechanism. Experimental studies of the Cd solid solutions result in a max zT of ∼1 at 800 K and, more importantly for application purposes, a ZT avg ∼ 0.6 from 300 K to 800 K. 
    more » « less
  3. A new compound, Ba 3 Ga 2 O 5 Cl 2 , isostructural with Ba 3 Fe 2 O 5 Cl 2 , was synthesized by solid-state reaction in air. Through single-crystal and powder X-ray diffraction analysis, the crystal structure was determined to be cubic with chiral space group I 2 1 3 and unit-cell parameter a  = 9.928 (1) Å. The Ga 3+ ions in Ba 3 Ga 2 O 5 Cl 2 are coordinated by O atoms and form GaO 4 tetrahedra. Ten neighboring GaO 4 tetrahedra are further bridged through corner sharing and rotation along the body diagonal, producing the chiral structure. Magnetization measurements indicate temperature-independent diamagnetic behavior, which is qualitatively consistent with core diamagnetism from all the constituent elements. 
    more » « less
  4. The local atomic environment of Yb 3+ ions doped into Yb:Er:SrFCl, Yb:Er:SrFBr, and Yb:Er:BaFCl nanocrystals was probed using Yb L 2 edge EXAFS spectroscopy. A structural model derived from substitution of Yb 3+ for Sr 2+ or Ba 2+ in the fluorohalide lattice failed to provide a crystallochemically meaningful description of the first coordination shell of Yb 3+ . On this basis, the presence of Yb 3+ coordinated as YbF 4 Cl 5 or YbF 4 Br 5 capped square antiprisms of C 4 v symmetry was ruled out. Two alternative models were evaluated. The first model was inspired by YbF 9 capped square antiprisms that make up the crystal structure of orthorhombic YbF 3 . The second model was based on YbO 4 F 3 capped trigonal prisms encountered in monoclinic YbOF. Both models correctly reproduced radial structure functions and yielded chemically meaningful ytterbium–fluorine and ytterbium–oxygen distances. Results from EXAFS studies indicate that compositional and structural heterogeneities appear in the fluorohalide lattice upon aliovalent doping with Yb 3+ . From a compositional standpoint, extra fluoride anions and/or oxide anions appear to be incorporated in the vicinity of Yb 3+ dopants. From a structural standpoint, the local symmetry around Yb 3+ ( C s or C 1 ) is lower than that of the crystallographic sites occupied by alkaline-earth cations. These conclusions hold for three different fluorohalide host compositions and rare-earth doping levels spanning one order of magnitude. 
    more » « less
  5. Herein we study the effect alloying Yb onto the octahedral cite of Te doped Mg 3 Sb 1.5 Bi 0.5 has on transport and the material's high temperature stability. We show that the reduction in mobility can be well explained with an alloy scattering argument due to disrupting the Mg octahedral –Mg tetrahedral interaction that is important for placing the conduction band minimum at a location with high valley degeneracy. We note this interaction likely dominates the conducting states across n-type Mg 3 Sb 2 –Mg 3 Bi 2 solid solutions and explains why alloying on the anion site with Bi isn't detrimental to Mg 3 Sb 2 's mobility. In addition to disrupting this Mg–Mg interaction, we find that alloying Yb into the Mg 3 Sb 2 structure reduces its n-type dopability, likely originating from a change in the octahedral site's vacancy formation energy. We conclude showing that while the material's figure of merit is reduced with the addition of Yb alloying, its high temperature stability is greatly improved. This study demonstrates a site-specific alloying effect that will be important in other complex thermoelectric semiconductors such as Zintl phases. 
    more » « less