The trend toward smaller mechanism footprints and volumes, while maintaining the ability to perform complex tasks, presents the opportunity for exploration of hypercompact mechanical systems integrated with curved surfaces. Developable surfaces are shapes that a flat sheet can take without tearing or stretching, and they represent a wide range of manufactured surfaces. This work introduces “developable mechanisms” as devices that emerge from or conform to developable surfaces. They are made possible by aligning hinge axes with developable surface ruling lines to enable mobility. Because rigid-link motion depends on the relative orientation of hinge axes and not link geometry, links can take the shape of the corresponding developable surface. Mechanisms are classified by their associated surface type, and these relationships are defined and demonstrated by example. Developable mechanisms show promise for meeting unfilled needs using systems not previously envisioned.
more »
« less
Designing Developable Mechanisms From Flat Patterns
This paper presents tools and methods to design cylindrical and conical developable mechanisms from flat, planar patterns. Equations are presented that relate the link lengths and link angles of planar and spherical mechanisms to the dimensions in a flat configuration. These flat patterns can then be formed into curved, developable mechanisms. Guidelines are established to determine if a mechanism described by a flat pattern can exhibit intramobile or extramobile behavior. A developable mechanism can only potentially exhibit intramobile or extramobile behavior if none of the links extend beyond half of the flat pattern. The behavior of a mechanism can change depending on the location of the cut of the flat pattern. Different joint designs are discussed including lamina emergent torsional (LET) joints. Physical examples are presented.
more » « less- Award ID(s):
- 1663345
- NSF-PAR ID:
- 10286306
- Date Published:
- Journal Name:
- Proceedings of the 2020 International Design Engineering Conferences
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
more » « less
Abstract Developable mechanisms conform to and emerge from developable, or specially curved, surfaces. The cylindrical developable mechanism can have applications in many industries due to the popularity of cylindrical or tube-based devices. Laparoscopic surgical devices in particular are widely composed of instruments attached at the proximal end of a cylindrical shaft. In this paper, properties of cylindrical developable mechanisms are discussed, including their behaviors, characteristics, and potential functions. One method for designing cylindrical developable mechanisms is discussed. Two example developable surgical devices that exemplify these behaviors, characteristics, and functions, along with the kinematic mechanisms comprising them, are discussed in detail.
-
more » « less
Abstract Stopping origami in arbitrary fold states can present a challenge for origami-based design. In this paper two categories of kirigami-based models are presented for stopping the fold motion of individual creases using deployable hard stops. These models are transcrease (across a crease) and deploy from a flat sheet. The first category is planar and has behavior similar to a four-bar linkage. The second category is spherical and behaves like a degree-4 origami vertex. These models are based on the zero-thickness assumption of paper and can be applied to origami patterns made from thin materials, limiting the motion of the base origami pattern through self-interference within the original facets. Model parameters are based on a desired fold or dihedral angle, as well as facet dimensions. Examples show model benefits and limitations.
-
null (Ed.)more » « less
Abstract Cylindrical developable mechanisms are devices that conform to and emerge from a cylindrical surface. These mechanisms can be formed or cut from the cylinder wall itself. This paper presents a study on adapting traditional hinge options to achieve revolute motion in these mechanisms. A brief overview of options is given, including classical pin hinges, small-length flexural pivots, initially curved beams, and an adaptation of the membrane thickness-accommodation technique. Curved Lamina Emergent Torsional (LET) joints are then evaluated in detail, and a thin-walled modeling assumption is checked analytically and empirically. A small-scale cylindrical developable mechanism is then evaluated with Nitinol curved LET joints.
-
null (Ed.)more » « less
Abstract We demonstrate analytically that it is possible to construct a developable mechanism on a cone that has rigid motion. We solve for the paths of rigid motion and analyze the properties of this motion. In particular, we provide an analytical method for predicting the behavior of the mechanism with respect to the conical surface. Moreover, we observe that the conical developable mechanisms specified in this paper have motion paths that necessarily contain bifurcation points which lead to an unbounded array of motion paths in the parameterization plane.
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Conference Paper:
- https://doi.org/10.1115/DETC2020-22445
