Humans use all surfaces of the hand for contact-rich manipulation. Robot hands, in contrast, typically use only the fingertips, which can limit dexterity. In this work, we leveraged a potential energy–based whole-hand manipulation model, which does not depend on contact wrench modeling like traditional approaches, to design a robotic manipulator. Inspired by robotic caging grasps and the high levels of dexterity observed in human manipulation, a metric was developed and used in conjunction with the manipulation model to design a two-fingered dexterous hand, the Model W. This was accomplished by simulating all planar finger topologies composed of open kinematic chainsmore »
The Elliott and Connolly Benchmark: A Test for Evaluating the In-Hand Dexterity of Robot Hands
Achieving dexterous in-hand manipulation with robot hands is an extremely challenging problem, in part due to current limitations in hardware design. One notable bottleneck hampering the development of improved hardware for dexterous manipulation is the lack of a standardized benchmark for evaluating in-hand dexterity. In order to address this issue, we establish a new benchmark for evaluating in- hand dexterity, specifically for humanoid type robot hands: the Elliott and Connolly Benchmark. This benchmark is based on a classification of human manipulations established by Elliott and Connolly, and consists of 13 distinct in-hand manipulation patterns. We define qualitative and quantitative metrics for evaluation of the benchmark, and provide a detailed testing protocol. Additionally, we introduce a dexterous robot hand - the CMU Foam Hand III - which is evaluated using the benchmark, successfully completing 10 of the 13 manipulation patterns and outperforming human hand baseline results for several of the patterns.
- Award ID(s):
- Publication Date:
- NSF-PAR ID:
- Journal Name:
- IEEERAS International Conference on Humanoid Robots
- Sponsoring Org:
- National Science Foundation
More Like this
There has been an explosion of ideas in soft robotics over the past decade, resulting in unprecedented opportunities for end effector design. Soft robot hands offer benefits of low-cost, compliance, and customized design, with the promise of dexterity and robustness. The space of opportunities is vast and exciting. However, new tools are needed to understand the capabilities of such manipulators and to facilitate manipulation planning with soft manipulators that exhibit free-form deformations. To address this challenge, we introduce a sampling based approach to discover and model continuous families of manipulations for soft robot hands. We give an overview of themore »
There has been great progress in soft robot design, manufacture, and control in recent years, and soft robots are a tool of choice for safe and robust handling of objects in conditions of uncertainty. Still, dexterous in-hand manipulation using soft robots remains a challenge. This paper introduces foam robot hands actuated by tendons sewn through a fabric glove. The flexibility of tendon actuation allows for high competence in utilizing deformation for robust in-hand manipulation. We discuss manufacturing, control, and design optimization for foam robots and demonstrate robust grasping and in-hand manipulation on a variety of different physical hand prototypes.
Traditional parallel-jaw grippers are insufficient for delicate object manipulation due to their stiffness and lack of dexterity. Other dexterous robotic hands often have bulky fingers, rely on complex time-varying cable drives, or are prohibitively expensive. In this paper, we introduce a novel low-cost compliant gripper with two centimeter-scaled 3-DOF delta robots using off-the-shelf linear actuators and 3D-printed soft materials. To model the kinematics of delta robots with soft compliant links, which diverge from typical rigid links, we train neural networks using a perception system. Furthermore, we analyze the delta robot’s force profile by varying the starting position in its workspacemore »
We consider the problem of in-hand dexterous manipulation with a focus on unknown or uncertain hand–object parameters, such as hand configuration, object pose within hand, and contact positions. In particular, in this work we formulate a generic framework for hand–object configuration estimation using underactuated hands as an example. Owing to the passive reconfigurability and the lack of encoders in the hand’s joints, it is challenging to estimate, plan, and actively control underactuated manipulation. By modeling the grasp constraints, we present a particle filter-based framework to estimate the hand configuration. Specifically, given an arbitrary grasp, we start by sampling a setmore »