An official website of the United States government
The transverse strength of fiber-reinforced composites is a matrix-dominated property whose accurate prediction iscrucial to designing and optimizing efficient, lightweight structures. State-of-the-art analytical models for compositestrength predictions do not account for fiber distribution, orientation, and curing-induced residual stress that greatlyinfluence damage initiation and failure propagation at the microscale. This work presents a novel methodology to develop an analytical solution for transverse composite strength based on computational micromechanics that enables the modeling of stress concentration due to representative volume elements (RVE) morphology and residual stress. Finiteelement simulations are used to model statistical samples of composite microstructures, generate stress-strain curves,and correlate statistical descriptors of the microscale to stress concentration factors to predict transverse strength as a function of fiber volume fraction. Tensile tests of thin plies validated this approach for carbon- and glass-reinforced composites showing promise to obtain a generalized analytical model for transverse composite strength prediction.
more »
« less
Effect of Manufacturing on the Transverse Response of Polymer Matrix Composites
The effect of residual stress build-up on the transverse properties of thermoset composites is studied through direct and inverse process modeling approaches. Progressive damage analysis is implemented to characterize composite stiffness and strength of cured composites microstructures. A size effect study is proposed to define the appropriate dimensions of Representative Volume Elements (RVEs). A comparison between periodic (PBCs) and flat (FBCs) boundary conditions during curing is performed on converged RVEs to establish computationally efficient methodologies. Transverse properties are analyzed as a function of the fiber packing through the nearest fiber distance statistical descriptor. A reasonable mechanical equivalence is achieved for RVEs consisting of 40 fibers. It has been found that process-induced residual stresses and fiber packing significantly contribute to the scatter in composites transverse strength. Variation of ±5% in average strength and 18% in standard deviation are observed with respect to ideally cured RVEs that neglect residual stresses. It is established that process modeling is needed to optimize the residual stress state and improve composite performance.
more »
« less
- Award ID(s):
- 1826232
- PAR ID:
- 10294131
- Date Published:
- Journal Name:
- Polymers
- Volume:
- 13
- Issue:
- 15
- ISSN:
- 2073-4360
- Page Range / eLocation ID:
- 2491
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
The transverse tensile strength of composites is susceptible to size effects. Therefore, it is paramount to develop length-scale specific physical test procedures to validate computational models that estimate the transverse composite response using micromechanics. To this end, a computational process modeling and virtual mechanical testing framework are presented in this study to predict the transverse response of composite microstructures subjected to processing conditions. Informed by a comprehensive material dataset, the numerical model is shown to reliably predict the process-induced residual stress generation in composite microstructures and accurately evaluate its influence on their transverse strength prediction. A novel procedure to fabricate thin composite laminates from a single ply of carbon fibers and characterize their transverse tensile response is presented to validate the numerical model. The results show excellent agreement with the virtual test predictions. This study highlights the importance of length-scale specific testing to minimize the influence of size effect on the transverse composite strength.more » « less
-
3D woven composites, in particular carbon/epoxy, are being increasingly adopted in aerospace, wind energy, transportation and other industries due to their high strength, lightweight, good dimensional stability and delamination resistance. They are often produced by resin transfer molding with epoxy cured at elevated temperature. This process can result in high level of residual stresses due to the mismatch in thermal expansion coefficients of carbon and epoxy. In this paper, a numerical modeling in combination with blind hole drilling experiments is utilized to determine processinginduced residual stresses in 3D woven composites using the example of orthogonal reinforcement. In particular, the individual contributions of residual stress in the weft and binder tows as well as resin-rich pockets to the entire residual stress distribution are evaluated. Our studies show that these contributions are determined by both arrangement and orientation of the tows. The developed numerical modeling tool can be used in the design of reinforcement architectures with reduced levels of residual stresses.more » « less
-
Uncontrolled curing-induced residual stress and strain are significant limitations to the efficient design of thermoset composites that compromise their structural durability and geometrical tolerance. Experimentally validated process modeling for the evaluation of processing parameter contributions to the residual stress build-up is crucial to identify residual stress mitigation strategies and enhance structural performance. This work presents an experimentally validated novel numerical approach based on higher-order finite elements for the process modeling of fiber-reinforced thermoset polymers across two composite characteristic length scales, the micro and macro-scale levels. The cure kinetics is described using an auto-catalytic phenomenological model. An instantaneous linear-elastic constitutive law, informed by time-dependent material characterization, is used to evaluate the stress state evolution as a function of the degree of cure and time. Micromechanical modeling is based on Representative Volume Elements (RVEs) that account for random fiber distribution verified against traditional 3D FE analysis. 0/90 laminate testing at the macroscale validates the proposed approach with an accuracy of 9%.more » « less
-
In-Situ Monitoring of the Manufacturing Process and Residual Stress Evolution in Thin-Ply Compositesnull (Ed.)Thin-ply composite laminates are of interest for several applications in aerospace and other high-performance industries due to their ability to delay transverse microcracking and delamination in static, fatigue, and impact loadings. It is essential to understand the evolution of thermal residual stresses during cure to optimize the manufacturing process of thin-ply composites for deep-space applications. In this research, processing induced residual stresses in thin-ply laminates are evaluated by devising a novel in-situ experimental approach. Thin-ply prepreg laminates are cured in a specially designed autoclave with viewports with plies laid upon a flat tool and a curved tool. The curved tool configuration used in this research is designed to simulate cryogenic fuel tank surfaces. The evolution of residual stresses in terms of out-of-plane displacement is characterized using Digital Image Correlation (DIC) during the autoclave cure cycle.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.3390/polym13152491
