Soft robots composed of elastic materials can exhibit nonlinear behaviors, such as variable stiffness and adaptable deformation, that are favorable to cooperation with humans. These characteristics enable soft robots to be used in multiple applications, ranging from minimally invasive surgery and search and rescue in emergency or hazardous environments to marine or space exploration and assistive devices for people with musculoskeletal disorders. Although soft actuators composed of smart materials have been proposed as a control strategy for soft robots, most studies have focused on traditional actuators using hydraulic or pneumatic pressure. Over the years, these have made a lot of progress, but they have not been able to overcome the limitations of the complex configuration of the system and the expansion of the cross-section of the actuator when contracted. This paper merges the actuator design methodology for smart materials with the mechanical analysis of auxetic structures to present an electrically driven soft actuator architecture that achieves reliable actuation displacements. This novel soft actuator, constructed with contractile SMA springs and flexible auxetic metamaterials (FAM), has a spontaneous recovery of the shape after a contraction, a negative Poisson’s ratio, and over 90% of consistency with the performance predictions at the design stage. Our research presents a methodology for the design of a new electrically driven soft actuator, describes the manufacture of SMA springs and FAM, and concludes with the validation of the design by experimental analysis using the 2D planar soft actuator prototype. Finally, our study revealed that the application of the extraordinary characteristics of smart materials and structures together into a single architecture can be a strategy to overcome the limitations of existing soft actuator studies.
- Award ID(s):
- 1734117
- PAR ID:
- 10303117
- Date Published:
- Journal Name:
- 2020 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS)
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Abstract -
The multimodal Zig-zag Soft Pneumatic Actuator (SPA) provides an effective design approach for achieving de- sired extensions and bending geometries under specific pressure conditions. The rigid body approximated model introduced in this study brings valuable insights into SPA dynamics by enabling faster simulations when compared to methods such as Finite Element Analysis (FEA). The model outlined in this paper forecasts static behavior by estimating the linear expansion of linear SPA and the bending angle of bending SPA. These two modes of motion can be combined to expand the degree of freedom. Depending on the configuration of the Strain Limiting Layer (SLL), the bending angle can be adjusted by controlling the actuator stiffness, a parameter that can be precisely characterized using the proposed actuator model. To address the hysteresis phenomena in linear expansion SPA, the Bouc-Wen hysteresis model is employed to model the actuator hysteresis responses at higher actuation rates. The validity of the proposed model is experimentally confirmed through the use of 3D-printed SPA prototypes that are designed for both extension and bending actuation.more » « less
-
Soft actuators have been studied and analyzed as a new solution for soft robotic technologies. These types of actuators have many advantages due to their predictable deformations and their ease of control, enabling them to hold and move delicate objects performing complex movements in confined spaces. Soft actuators can be made using different manufacturing processes, but the most common is mold casting. However, this manufacturing process involves several steps, increasing the manufacturing time and hindering changes in the design. This paper presents a novel design of a 3D printed soft pneumatic actuator based on additive manufacturing, achieving design versatility and performance. The produced actuator has seven segments that can be individually controlled. The actuators were made using fused deposition modeling (FDM) technology in one continuous process and without support material. The mechanical performance of the soft actuators was demonstrated, analyzing the deformation in the z-axis based on input pressure.more » « less
-
We present the design, modeling, and implemen- tation of a novel pneumatic actuator, the Pneumatic Reel Actuator (PRA). The PRA is highly extensible, lightweight, capable of operating in compression and tension, compliant, and inexpensive. An initial prototype of the PRA can reach extension ratios greater than 16:1, has a force-to-weight ratio over 28:1, reach speeds of 0.87 meters per second, and can be constructed with parts totaling less than $4 USD. We have developed a model describing the actuator and have conducted experiments characterizing the actuator’s performance in regards to force, extension, pressure, and speed. We have implemented two parallel robotic applications in the form of a three degree of freedom robot arm and a tetrahedral robot.more » « less
-
more » « less
Abstract Actuators utilizing snap‐through instabilities are widely investigated for high‐performance fast actuators and shape reconfigurable structures owing to their rapid response and limited reliance on continuous energy input. However, prevailing approaches typically involve a combination of multiple bistable actuator units and achieving multistability within a single actuator unit still remains an open challenge. Here, a soft actuator is presented that uses shape memory alloy (SMA) and mixed‐mode elastic instabilities to achieve intrinsically multistable shape reconfiguration. The multistable actuator unit consists of six stable states, including two pure bending states and four bend‐twist states. The actuator is composed of a pre‐stretched elastic membrane placed between two elastomeric frames embedded with SMA coils. By controlling the sequence and duration of SMA activation, the actuator is capable of rapid transition between all six stable states within hundreds of milliseconds. Principles of energy minimization are used to identify actuation sequences for various types of stable state transitions. Bending and twisting angles corresponding to various prestretch ratios are recorded based on parameterizations of the actuator's geometry. To demonstrate its application in practical conditions, the multistable actuator is used to perform visual inspection in a confined space, light source tracking during photovoltaic energy harvesting, and agile crawling.
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Conference Paper:
- https://doi.org/10.1109/IROS45743.2020.9340803
