skip to main content


Title: 1D Shape Matching of a Lithium-Ion Battery Actuator
Abstract

Silicon anodes have been demonstrated to provide significant actuation in addition to energy storage in lithium-ion batteries (LIBs). This work studies the optimization of 1D unimorph and bimorph actuators to achieve a target shape upon actuation. A 1D shape matching with design optimization is used to estimate the varied charge distribution along the length for a LIB actuator and thereby the effect of distance between electrodes in charging.

A genetic algorithm (GA) is used with actuation strain distribution as the design variable. The objective of the optimization is to shape-match by minimizing the shape error between a target shape and actuated shape, both defined by several points along the length.

The approach is experimentally validated by shape matching a notched unimorph target shape. A shape error of 1.5% is obtained. An optimized unimorph converges to an objective function of less than 0.029% of the length at full state of charge (SOC) for a 5-segment beam.

A second shape matching case study using a bimorph is investigated to showcase the tailorability of LIB actuators. The optimal bimorph achieves an objective function of less than 0.23% of the length for a design variable set of top and bottom actuation strain of an 8-segment beam. The actuated shape nearly matches the target shape by simultaneously activating top and bottom active layers to achieve the same differential actuation strain (the difference between top and bottom active layer actuation strain).

The results show that a bimorph actuator can achieve a given shape while also storing significantly more charge than is necessary to maintain a given complex shape. This demonstrates a strength of energy storage based actuators: excess energy can be stored within the actuator and can be expended without affecting the work done or the shape maintained by the actuator.

 
more » « less
Award ID(s):
1662055
NSF-PAR ID:
10304208
Author(s) / Creator(s):
 ;  ;  ;  
Date Published:
Journal Name:
2021 ASME SMASIS
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. A self-powered, and self-actuating lithium ion battery (LIB) has the potential to achieve large deformation while still maintaining actuation force. The energy storage capability allows for continual actuation without an external power source once charged. Reshaping the actuator requires a nonuniform distribution of charge and/or bending stiffness. Spatially varying the state of charge and bending stiffness along the length of a segmented unimorph configuration have the effect of improving the tailorability of the deformed actuator. In this paper, an analytical model is developed to predict the actuation properties of the segmented unimorph beam to determine its usefulness as an actuator. The model predicts the free deflection, blocked deflection, and blocked force at the tip as a function of spatially varying state of charge and bending stiffness. The main contribution of the paper is the development of blocked deflection over the length of the segmented unimorph, which has not yet been considered in the literature. The model is verified using experimental data and commercial finite element analysis. 
    more » « less
  2. Silicon anodes in lithium ion batteries have high theoretical capacity and large volumetric expansion. In this paper, both characteristics are used in a segmented unimorph actuator consisting of several Si composite anodes on a copper current collector. Each unimorph segment is self-actuating during discharge and the discharge power can be provided to external circuits. With no external forces and zero current draw, the unimorph segments will maintain their actuated shape. Stresspotential coupling allows for the unimorph actuator to be self-sensing because bending changes the anodes’ potential. An analytical model is derived from a superposition of pure bending and extensional deformation forces and moments induced by the cycling of a Si anode. An approximately linear relationship between axial strain and state of charge of the anode drives the bending displacement of the unimorph. The segmented device consists of electrically insulated and individually controlled segments of the Si-coated copper foil to allow for variable curvature throughout the length of the beam. The model predicts the free deflection along the length of the beam and the blocked force. Tip deflection and blocked force are shown for a range of parameters including segment thicknesses, beam length, number of segments, and state of charge. The potential applications of this device include soft robots and dexterous 3D grippers. 
    more » « less
  3. Abstract

    Magnetoactive elastomers (MAEs) are capable of large deformation, shape programming, and moderately large actuation forces when driven by an external magnetic field. These capabilities enable applications such as soft grippers, biomedical devices, and actuators. To facilitate complex shape deformation and enhanced range of motion, a unimorph can be designed with varying geometries, behave spatially varying multi-material properties, and be actuated with a non-uniform external magnetic field. To predict actuation performance under these complex conditions, an analytical model of a segmented MAE unimorph is developed based on beam theory with large deformation. The effect of the spatially-varying magnetic field is approximated using a segment-wise effective torque. The model accommodates spatially varying concentrations of magnetic particles and differentiates between the actuation mechanisms of hard and soft magnetic particles by accommodating different assumptions concerning the magnitude and direction of induced magnetization under a magnetic field. To validate the accuracy of the model predictions, four case studies are considered with various magnetic particles and matrix materials. Actuation performance is measured experimentally to validate the model for the case studies. The results show good agreement between experimental measurements and model predictions. A further parametric study is conducted to investigate the effects of the magnetic properties of particles and external magnetic fields on the free deflection. In addition, complex shape programming of the unimorph actuator is demonstrated by locally altering the geometric and material properties.

     
    more » « less
  4. Abstract

    Silicon is regarded as one of the most promising anode materials for lithium-ion batteries. Its high theoretical capacity (4000 mAh/g) has the potential to meet the demands of high-energy density applications, such as electric air and ground vehicles. The volume expansion of Si during lithiation is over 300%, indicating its promise as a large strain electrochemical actuator. A Si-anode battery is multifunctional, storing electrical energy and actuating through volume change by lithium-ion insertion.

    To utilize the property of large volume expansion, we design, fabricate, and test two types of Si anode cantilevers with bi-directional actuation: (a) bimorph actuator and (b) insulated double unimorph actuator. A transparent battery chamber is fabricated, provided with NCM cathodes, and filled with electrolyte. The relationship between state of charge and electrode deformation is measured using current integration and high-resolution photogrammetry, respectively. The electrochemical performance, including voltage versus capacity and Coulombic efficiency versus cycle number, is measured for several charge/discharge cycles. Both configurations exhibit deflections in two directions and can store energy. In case (a), the largest deflection is roughly 35% of the cantilever length. Twisting and unexpected bending deflections are observed in this case, possibly due to back-side lithiation, non-uniform coating thickness, and uneven lithium distribution. In case (b), the single silicon active coating layer can deflect 12 passive layers.

     
    more » « less
  5. Among anode materials for lithium ion batteries, silicon (Si) in known for high theoretical capacity and low cost. Si exhibits over 300% volume change during cycling, potentially providing large displacement. In this paper, we present the design, fabrication and testing of a multifunctional NCM-Si battery that not only stores energy, but also utilizes the volume change of Si for actuation. The battery is transparent, thus allowing the visualization of the actuation process during cycling. This paper shows Si anode design that stores energy and actuates through volume change associated with lithium insertion. Experimental results from a transparent battery show that a Cu current collector single-side coated with Si nanoparticles can store 10:634mWh (charge)/ 2:074mWh (discharge) energy and bend laterally with over 40% beam length displacement. The unloaded anode is found to remain circular shape during cycling. Using a unimorph cantilever model, the Si coating layer actuation strain is estimated to be 30% at 100% SOC. 
    more » « less