skip to main content

Explore Research Products in the NSF-PAR

Title: A Control Scheme for a DC Extreme Fast Charger with RMS Current Minimization
In this study, a power converter topology and control schemes for the power converter stages are proposed for a DC extreme fast charger. The proposed system is composed of a cascaded H-bridge (CHB) converter as the active front end (AFE), and an input series output parallel (ISOP), which includes three parallel connected dual active bridge (DAB) cells. A modified Lyapunov Function (LF) based control strategy is applied to obtain high current control response for the AFE. An additional controller to remove the voltage unbalances among the H-bridges is also presented. Additionally, the triple phase-shift (TPS) control method is applied for the ISOP DAB converter. A Lagrange Multiplier (LM) based optimization study is performed to minimize the RMS current of the transformer. The performance of the proposed converter topology and control strategies is validated with MATLAB/Simulink simulations.  more » « less
Award ID(s):
1650470
NSF-PAR ID:
10313567
Author(s) / Creator(s):
; ; ;
Date Published:
Journal Name:
2021 IEEE 12th Annual International Symposium on Power Electronics for Distributed Generation Systems
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ( , 2020 IEEE Transportation Electrification Conference & Expo (ITEC))
    null (Ed.)
    High frequency modular power converters are increasingly becoming popular due to their small size and weight. Targeting the input-series and output-parallel (ISOP) dual active bridge (DAB) DC-DC converters, this paper proposes a control scheme based on optimal triple phase-shift (TPS) control for both power sharing control and RMS current minimization. This achieves balanced power transmission, even under mismatched leakage inductance of a DAB module of the ISOP. In order to obtain the optimal zones of operation for the converter, the RMS current was minimized using the Lagrange multiplier method to obtain the optimal duty cycles. The power balancing was added to compensate unbalanced power sharing for variations in model parameters or module shutdown. Analyses and simulation results through MATLAB/Simulink are presented to validate the proposed controller. 
    more » « less
  2. ; ; ; ( , 2020 IEEE Energy Conversion Congress and Exposition (ECCE))
    null (Ed.)
    The primary purpose of this paper is to obtain accurate analytical expressions of the dual active bridge (DAB) converter under the three-degree of freedom control technique. This technique, known as triple phase-shift (TPS) modulation, is utilized for the efficiency optimization of different operating zones and modes of the DAB. Three operating zones and modes have been retained to analyze the converter. Depending on the operating regions and due to the high nonlinearity of the obtained expressions, two optimization techniques have been used. The offline particle swarm optimization (PSO) method is utilized in local optimization (LO) and results in a numerical value. The Lagrange Multiplier (LM) is utilized in global optimization (GO) and results in a closed form expression. In the case of LO, the optimal duty cycles that minimize the power loss are not the optimal values for the minimum root-mean-square (RMS) current or peak current stress. Conversely, in the case of GO, the optimal duty cycles minimize the RMS, peak current and power loss at the same time for the entire power range. Detailed analyses and simulation results from MATLAB/Simulink are given to prove the effectiveness of the proposed method. 
    more » « less
  3. ; ; ( , 2021 IEEE 12th Annual International Symposium on Power Electronics for Distributed Generation Systems)
    In this study, a sliding mode control (SMC) scheme is proposed for the single-phase cascaded H-bridge (CHB) multilevel active front end (AFE) rectifier with LCL filter. A PI controller is employed to control the DC voltage of the rectifier modules and to obtain the amplitude for the reference grid current. The SMC based current control scheme uses the grid current and filter capacitor voltage feedbacks. The resonance of the LCL filter is damped using the voltage feedback of the capacitor. Therefore, the requirement for additional damping circuitry is removed. Simulation and experimental results are presented to verify the performance of the SMC for the CHB multilevel AFE rectifier. The overall proposed control scheme provides almost unity power factor and fast transient response. It is seen from the results that the current drawn from the grid is in sinusoidal waveform with low THD. 
    more » « less
  4. ; ; ; ( , 2020 IEEE Applied Power Electronics Conference and Exposition (APEC))
    null (Ed.)
    The cascaded H-bridge multilevel active rectifier is a prominent converter configuration. It presents compelling advantages, including high adjustability for a number of applications, such as in solid-state transformers, traction applications, medium and high power motor drives and battery chargers. However, when the H-bridge is operating under an unbalanced load and asymmetrical voltage conditions, it becomes important to design advanced control strategies to maintain the stability of the system. In this study, a Lyapunov-function based control method is proposed for controlling the single-phase cascaded H-bridge active rectifier to achieve global asymptotic stability. A capacitor voltage feedback is added to the conventional Lyapunov-function based stabilizing control method to minimize the resonance of the LCL filter. Additionally, a Proportional-Resonant (PR) control approach is adopted to obtain the reference current signal. This increases the robustness of the current control scheme. A DC voltage balancing control procedure is also employed to prevent the unbalanced DC voltage conditions among the H-bridges. The DC voltage is controlled via a PI controller. The capability of the control approach is verified with simulation and experimental studies. 
    more » « less
  5. ; ; ; ; ; ; ( , 2021 IEEE Energy Conversion Congress and Exposition (ECCE))
    This paper applies a common-mode modeling approach for a Silicon Carbide (SiC) based medium voltage neutral point clamped (NPC) dual active bridge (DAB) with a 2 level Full-Bridge (2L-FB) stage utilizing an electromagnetic interference (EMI) characterization testbed. A common-mode equivalent circuit model (CEM) for the system is derived, which accurately captures the effect of cross-mode coupling behavior between differential-mode and common-mode caused by circuit asymmetries, such as baseplate capacitance of multi-chip power modules or windings in the transformer. This cross-mode coupling effect is required to accurately model EMI at the higher frequencies of the conducted emissions standards. The derived CEM shows close agreement when compared to the mixed-mode simulation, verifying the model's efficacy. Additionally, baseplate current was shown to be minimized by tying the neutral point of the converter to the heatsink, where this result can be explained through the CEM. The CEM of the NPC DAB will be validated through empirical measurements on an EMI characterization testbed. The testbed features a copper ground plane and custom-built LISNs that can handle the unfiltered harmonic and EMI content of power electronic converters. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email