An official website of the United States government
This study aims to leverage the relationship between fluid dynamic loading and resulting structural deformation to infer the incident flow speed from measurements of time-dependent structure kinematics. Wind tunnel studies are performed on cantilevered cylinders and trees. Tip deflections of the wind-loaded structures are captured in time series data, and a physical model of the relationship between force and deflection is applied to calculate the instantaneous wind speed normalized with respect to a known reference wind speed. Wind speeds inferred from visual measurements showed consistent agreement with ground truth anemometer measurements for different cylinder and tree configurations. These results suggest an approach for non-intrusive, quantitative flow velocimetry that eliminates the need to directly visualize or instrument the flow itself.
more »
« less
Wind speed inference from environmental flow–structure interactions. Part 2. Leveraging unsteady kinematics
Abstract This work explores the relationship between wind speed and time-dependent structural motion response as a means of leveraging the rich information visible in flow–structure interactions for anemometry. We build on recent work by Cardona, Bouman and Dabiri ( Flow , vol. 1 , 2021, E4), which presented an approach using mean structural bending. Here, we present the amplitude of the dynamic structural sway as an alternative signal that can be used when mean bending is small or inconvenient to measure. A force balance relating the instantaneous loading and instantaneous deflection yields a relationship between the incident wind speed and the amplitude of structural sway. This physical model is applied to two field datasets comprising 13 trees of 4 different species exposed to ambient wind conditions. Model generalization to the diverse test structures is achieved through normalization with respect to a reference condition. The model agrees well with experimental measurements of the local wind speed, suggesting that tree sway amplitude can be used as an indirect measurement of mean wind speed, and is applicable to a broad variety of diverse trees.
more »
« less
- Award ID(s):
- 2019712
- PAR ID:
- 10318707
- Date Published:
- Journal Name:
- Flow
- Volume:
- 2
- ISSN:
- 2633-4259
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
The current trend in offshore wind energy is to design and install systems with larger swept areas that yield unprecedented efficiency. Long and slender blades are needed to achieve this objective. As a result of aerodynamic and structural tailoring, slender blades are particularly susceptible to various dynamic instability phenomena during standard operations. One of these phenomena is the bending-torsion flutter that may lead either to structural failure or system breakdown. The research author has been examining blade flutter under the influence of stochastic perturbations, which include both flow turbulence and aeroelastic load variability. A reduced-order Markov model has been used to describe the effects of the various random perturbations. Mean-square stability has been recently explored; results suggest that perturbations may negatively impact the flutter angular speed and increase the risk of failure. In this study the model is employed to investigate moment stability beyond mean squares, observing that dynamic instability involves nonlinear propagation of the perturbations and may exhibit amplitude dependency. Third-order instability is investigated and compared against previous numerical results. The NREL 5MW reference wind turbine blade is used as a benchmark example.more » « less
-
Abstract Linear theory has long been used to study mountain waves and has been successful in describing much of their behaviour. In the simplest theoretical context, that of two‐dimensional steady‐state flow with constant Brunt–Väisälä frequency (N) and horizontal wind speed (U), finite‐amplitude effects are relatively minor until wave breaking occurs. However, in more complex environmental profiles, significant finite‐amplitude effects occur below the wave‐breaking threshold. We constructed a linearized version of a fully nonlinear time‐dependent model, thereby facilitating direct comparisons between linear and finite‐amplitude solutions in cases with upstream profiles representative of typical real‐world events. Beginning with the simplest profile that includes a tropopause, namely an environment with constant upstream wind speed and two layers of constant static stability, we progressively investigate more complex profiles that include vertical wind shear typical of the midlatitude westerlies. Our results demonstrate that, even without wave breaking, finite‐amplitude effects can play an important role in modulating the mountain‐wave amplitude and gravity‐wave drag. The modulation is a function of the tropopause height and is most pronounced when the cross‐ridge flow increases strongly with height.more » « less
-
SUMMARY Geothermal heat flow beneath the Greenland and Antarctic ice sheets is an important boundary condition for ice sheet dynamics, but is rarely measured directly and therefore is inferred indirectly from proxies (e.g. seismic structure, magnetic Curie depth, surface topography). We seek to improve the understanding of the relationship between heat flow and one such proxy—seismic structure—and determine how well heat flow data can be predicted from the structure (the characterization problem). We also seek to quantify the extent to which this relationship can be extrapolated from one continent to another (the transportability problem). To address these problems, we use direct heat flow observations and new seismic structural information in the contiguous United States and Europe, and construct three Machine Learning models of the relationship with different levels of complexity (Linear Regression, Decision Tree and Random Forest). We compare these models in terms of their interpretability, the predicted heat flow accuracy within a continent and the accuracy of the extrapolation between Europe and the United States. The Random Forest and Decision Tree models are the most accurate within a continent, while the Linear Regression and Decision Tree models are the most accurate upon extrapolation between continents. The Decision Tree model uniquely illuminates the regional variations of the relationship between heat flow and seismic structure. From the Decision Tree model, uppermost mantle shear wave speed, crustal shear wave speed and Moho depth together explain more than half of the observed heat flow variations in both the United States [$$r^2 \approx 0.6$$ (coefficient of determination), $$\mathrm{RMSE} \approx 8\, {\rm mW}\,{\rm m}^{-2}$$ (Root Mean Squared Error)] and Europe ($$r^2 \approx 0.5, \mathrm{RMSE} \approx 13\, {\rm mW}\,{\rm m}^{-2}$$), such that uppermost mantle shear wave speed is the most important. Extrapolating the U.S.-trained models to Europe reasonably predicts the geographical distribution of heat flow [$$\rho = 0.48$$ (correlation coefficient)], but not the absolute amplitude of the variations ($r^2 = 0.17$), similarly from Europe to the United States ($$\rho = 0.66, r^2 = 0.24$$). The deterioration of accuracy upon extrapolation is caused by differences between the continents in how seismic structure is imaged, the heat flow data and intrinsic crustal radiogenic heat production. Our methods have the potential to improve the reliability and resolution of heat flow inferences across Antarctica and the validation and cross-validation procedures we present can be applied to heat flow proxies other than seismic structure, which may help resolve inconsistencies between existing subglacial heat flow values inferred using different proxies.more » « less
-
This paper examines the role of wave–mean flow interaction in the onset and suddenness of stratospheric sudden warmings (SSWs). Evidence is presented that SSWs are, on average, a threshold behavior of finite-amplitude Rossby waves arising from the competition between an increasing wave activity A and a decreasing zonal-mean zonal wind [Formula: see text]. The competition puts a limit to the wave activity flux that a stationary Rossby wave can transmit upward. A rapid, spontaneous vortex breakdown occurs once the upwelling wave activity flux reaches the limit, or equivalently, once [Formula: see text] drops below a certain fraction of u REF , a wave-free, reference-state wind inverted from the zonalized quasigeostrophic potential vorticity. This fraction is 0.5 in theory and about 0.3 in reanalyses. We propose [Formula: see text] as a local, instantaneous measure of the proximity to vortex breakdown (i.e., preconditioning). The ratio r generally stays above the threshold during strong-vortex winters until a pronounced final warming, whereas during weak-vortex winters it approaches the threshold early in the season, culminating in a precipitous drop in midwinter as SSWs form. The essence of the threshold behavior is captured by a semiempirical 1D model of SSWs, similar to the “traffic jam” model of Nakamura and Huang for atmospheric blocking. This model predicts salient features of SSWs including rapid vortex breakdown and downward migration of the wave activity/zonal wind anomalies, with analytical expressions for the respective time scales. The model’s response to a variety of transient wave forcing and damping is discussed.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1017/flo.2021.15
