More Like this

1. Lithium niobate photonics: Unlocking the electromagnetic spectrum

   https://doi.org/10.1126/science.abj4396  

   Boes, Andreas ; Chang, Lin ; Langrock, Carsten ; Yu, Mengjie ; Zhang, Mian ; Lin, Qiang ; Lončar, Marko ; Fejer, Martin ; Bowers, John ; Mitchell, Arnan ( January 2023 , Science)

   BACKGROUND Electromagnetic (EM) waves underpin modern society in profound ways. They are used to carry information, enabling broadcast radio and television, mobile telecommunications, and ubiquitous access to data networks through Wi-Fi and form the backbone of our modern broadband internet through optical fibers. In fundamental physics, EM waves serve as an invaluable tool to probe objects from cosmic to atomic scales. For example, the Laser Interferometer Gravitational-Wave Observatory and atomic clocks, which are some of the most precise human-made instruments in the world, rely on EM waves to reach unprecedented accuracies. This has motivated decades of research to develop coherent EM sources over broad spectral ranges with impressive results: Frequencies in the range of tens of gigahertz (radio and microwave regimes) can readily be generated by electronic oscillators. Resonant tunneling diodes enable the generation of millimeter (mm) and terahertz (THz) waves, which span from tens of gigahertz to a few terahertz. At even higher frequencies, up to the petahertz level, which are usually defined as optical frequencies, coherent waves can be generated by solid-state and gas lasers. However, these approaches often suffer from narrow spectral bandwidths, because they usually rely on well-defined energy states of specific materials, which results in a rather limited spectral coverage. To overcome this limitation, nonlinear frequency-mixing strategies have been developed. These approaches shift the complexity from the EM source to nonresonant-based material effects. Particularly in the optical regime, a wealth of materials exist that support effects that are suitable for frequency mixing. Over the past two decades, the idea of manipulating these materials to form guiding structures (waveguides) has provided improvements in efficiency, miniaturization, and production scale and cost and has been widely implemented for diverse applications. ADVANCES Lithium niobate, a crystal that was first grown in 1949, is a particularly attractive photonic material for frequency mixing because of its favorable material properties. Bulk lithium niobate crystals and weakly confining waveguides have been used for decades for accessing different parts of the EM spectrum, from gigahertz to petahertz frequencies. Now, this material is experiencing renewed interest owing to the commercial availability of thin-film lithium niobate (TFLN). This integrated photonic material platform enables tight mode confinement, which results in frequency-mixing efficiency improvements by orders of magnitude while at the same time offering additional degrees of freedom for engineering the optical properties by using approaches such as dispersion engineering. Importantly, the large refractive index contrast of TFLN enables, for the first time, the realization of lithium niobate–based photonic integrated circuits on a wafer scale. OUTLOOK The broad spectral coverage, ultralow power requirements, and flexibilities of lithium niobate photonics in EM wave generation provides a large toolset to explore new device functionalities. Furthermore, the adoption of lithium niobate–integrated photonics in foundries is a promising approach to miniaturize essential bench-top optical systems using wafer scale production. Heterogeneous integration of active materials with lithium niobate has the potential to create integrated photonic circuits with rich functionalities. Applications such as high-speed communications, scalable quantum computing, artificial intelligence and neuromorphic computing, and compact optical clocks for satellites and precision sensing are expected to particularly benefit from these advances and provide a wealth of opportunities for commercial exploration. Also, bulk crystals and weakly confining waveguides in lithium niobate are expected to keep playing a crucial role in the near future because of their advantages in high-power and loss-sensitive quantum optics applications. As such, lithium niobate photonics holds great promise for unlocking the EM spectrum and reshaping information technologies for our society in the future. Lithium niobate spectral coverage. The EM spectral range and processes for generating EM frequencies when using lithium niobate (LN) for frequency mixing. AO, acousto-optic; AOM, acousto-optic modulation; χ (2) , second-order nonlinearity; χ (3) , third-order nonlinearity; EO, electro-optic; EOM, electro-optic modulation; HHG, high-harmonic generation; IR, infrared; OFC, optical frequency comb; OPO, optical paramedic oscillator; OR, optical rectification; SCG, supercontinuum generation; SHG, second-harmonic generation; UV, ultraviolet. 

   more » « less
2. Search for supersymmetry in final states with missing transverse momentum and three or more b-jets in 139 fb$$^{-1}$$ of proton–proton collisions at $$\sqrt{s} = 13$$ TeV with the ATLAS detector

   https://doi.org/10.1140/epjc/s10052-023-11543-6  

   Aad, G. ; Abbott, B. ; Abbott, D. C. ; Abeling, K. ; Abidi, S. H. ; Aboulhorma, A. ; Abramowicz, H. ; Abreu, H. ; Abulaiti, Y. ; Abusleme Hoffman, A. C. ; et al ( July 2023 , The European Physical Journal C)

   A search for supersymmetry involving the pair production of gluinos decaying via off-shell third-generation squarks into the lightest neutralino$$(\tilde{\chi }^0_1)$$$\left({\tilde{\chi }}_1^0\right)$is reported. It exploits LHC proton–proton collision data at a centre-of-mass energy$$\sqrt{s} = 13$$$\sqrt{s}=13$TeV with an integrated luminosity of 139 fb$$^{-1}$$${}^{-1}$collected with the ATLAS detector from 2015 to 2018. The search uses events containing large missing transverse momentum, up to one electron or muon, and several energetic jets, at least three of which must be identified as containingb-hadrons. Both a simple kinematic event selection and an event selection based upon a deep neural-network are used. No significant excess above the predicted background is found. In simplified models involving the pair production of gluinos that decay via off-shell top (bottom) squarks, gluino masses less than 2.44 TeV (2.35 TeV) are excluded at 95% CL for a massless$$\tilde{\chi }^0_1.$$${\tilde{\chi }}_1^0.$Limits are also set on the gluino mass in models with variable branching ratios for gluino decays to$$b\bar{b}\tilde{\chi }^0_1,$$$b\overline{b}{\tilde{\chi }}_1^0,$$$t\bar{t}\tilde{\chi }^0_1$$$t\overline{t}{\tilde{\chi }}_1^0$and$$t\bar{b}\tilde{\chi }^-_1/\bar{t}b\tilde{\chi }^+_1.$$$t\overline{b}{\tilde{\chi }}_1^{-}/\overline{t}b{\tilde{\chi }}_1^{+}.$

    

   more » « less
3. General framework for ultrafast nonlinear photonics: unifying single and multi-envelope treatments [Invited]

   https://doi.org/10.1364/OE.513856  

   Phillips, C. R. ; Jankowski, M. ; Flemens, N. ; Fejer, M. M. ( February 2024 , Optics Express)

   Numerical modeling of ultrashort pulse propagation is important for designing and understanding the underlying dynamical processes in devices that take advantage of highly nonlinear interactions in dispersion-engineered optical waveguides. Once the spectral bandwidth reaches an octave or more, multiple types of nonlinear polarization terms can drive individual optical frequencies. This issue is particularly prominent inχ⁽²⁾devices where all harmonics of the input pulse are generated and there can be extensive spectral overlap between them. Single-envelope approaches to pulse propagation have been developed to address these complexities; this has led to a significant mismatch between the strategies used to analyze moderate-bandwidth devices (usually involving multi-envelope models) and those used to analyze octave-spanning devices (usually involving models with one envelope per waveguide mode). Here we unify the different strategies by developing a common framework, applicable to any optical bandwidth, that allows for a side-by-side comparison between single- and multi-envelope models. We include bothχ⁽²⁾andχ⁽³⁾interactions in these models, with emphasis onχ⁽²⁾interactions. We show a detailed example based on recent supercontinuum generation experiments in a thin-film LiNbO₃on sapphire quasi-phase-matching waveguide. Our simulations of this device show good agreement between single- and multi-envelope models in terms of the frequency comb properties of the electric field, even for multi-octave-spanning spectra. Building on this finding, we explore how the multi-envelope approach can be used to develop reduced models that help build physical insights about new ultrafast photonics devices enabled by modern dispersion-engineered waveguides, and discuss practical considerations for the choice of such models. More broadly, we give guidelines on the pros and cons of the different modeling strategies in the context of device design, numerical efficiency, and accuracy of the simulations.

    

   more » « less
4. A Study of Second‐Order Susceptibility in Digital Alloy‐Grown InAs/AlSb Multiple Quantum Wells

   https://doi.org/10.1002/adom.202102845  

   Foster, Natalie D. ; Rockwell, Ann Kathryn ; McArthur, Joshua Andrew ; Mendoza, Bernardo S. ; Bank, Seth R. ; Downer, Michael C. ( May 2022 , Advanced Optical Materials)

   A preliminary measurement of the second‐order nonlinear optical susceptibility of symmetric, coupled, InAs/AlSb multiple quantum well (MQW) structures is acquired through optical second‐harmonic generation (SHG) at fundamental wavelength 1.55 µm. High quality crystalline MQW structures of variable thickness and corresponding bulk AlSb control samples are achieved using a digital alloy epitaxial growth technique that avoids cluster formation and phase segregation. All samples are grown in between a GaSb cap and substrate layer. To isolate SHG from the MQW (or control) layers of interest from cap and substrate contributions, a multilayer optical response matrix model is built and independently tested by accurately reproducing linear reflectivity spectra. While a simplified response matrix analysis of SHG based solely on bulk χ⁽²⁾s does not reproduce the distinct SHG responses of the two sets of samples, the inclusion of an additional interface SHG contribution leads to a successful fit of the data and implies . The results demonstrate a proof‐of‐concept quantification of χ⁽²⁾in symmetric MQWs and suggest the possibility of engineering χ⁽²⁾in these structures, particularly with the introduction of well asymmetries.

    

   more » « less
5. Programmable plasmonic phase modulation of free-space wavefronts at gigahertz rates

   Alexei Smolyaninov, Abdelkrim El ( February 2019 , Nature photonics)

   Space-variant control of optical wavefronts is important for many applications in photonics, such as the generation of structured light beams, and is achieved with spatial light modulators. Commercial devices, at present, are based on liquid-crystal and digital micromirror technologies and are typically limited to kilohertz switching speeds. To realize significantly higher operating speeds, new technologies and approaches are necessary. Here we demonstrate two-dimensional control of free-space optical fields at a wavelength of 1,550 nm at a 1 GHz modulation speed using a programmable plasmonic phase modulator based on near-field interactions between surface plasmons and materials with an electrooptic response. High χ(2) and χ(3) dielectric thin films of either aluminium nitride or silicon-rich silicon nitride are used as an active modulation layer in a surface plasmon resonance configuration to realize programmable space-variant control of optical wavefronts in a 4 × 4 pixel array at high speed. 

   more » « less