skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


  • NSF Public Access
  • Search Results
  • Pb Mineral Precipitation in Solutions of Sulfate, Carbonate and Phosphate: Measured and Modeled Pb Solubility and Pb2+ Activity
Title: Pb Mineral Precipitation in Solutions of Sulfate, Carbonate and Phosphate: Measured and Modeled Pb Solubility and Pb2+ Activity
Lead (Pb) solubility is commonly limited by dissolution–precipitation reactions of secondary mineral phases in contaminated soils and water. In the research described here, Pb solubility and free Pb2+ ion activities were measured following the precipitation of Pb minerals from aqueous solutions containing sulfate or carbonate in a 1:5 mole ratio in the absence and presence of phosphate over the pH range 4.0–9.0. Using X-ray diffraction and Fourier-transform infrared spectroscopic analysis, we identified anglesite formed in sulfate-containing solutions at low pH. At higher pH, Pb carbonate and carbonate-sulfate minerals, hydrocerussite and leadhillite, were formed in preference to anglesite. Precipitates formed in the Pb-carbonate systems over the pH range of 6 to 9 were composed of cerussite and hydrocerussite, with the latter favored only at the highest pH investigated. The addition of phosphate into the Pb-sulfate and Pb-carbonate systems resulted in the precipitation of Pb3(PO4)2 and structurally related pyromorphite minerals and prevented Pb sulfate and carbonate mineral formation. Phosphate increased the efficiency of Pb removal from solution and decreased free Pb2+ ion activity, causing over 99.9% of Pb to be precipitated. Free Pb2+ ion activities measured using the ion-selective electrode revealed lower values than predicted from thermodynamic constants, indicating that the precipitated minerals may have lower KSP values than generally reported in thermodynamic databases. Conversely, dissolved Pb was frequently greater than predicted based on a speciation model using accepted thermodynamic constants for Pb ion-pair formation in solution. The tendency of the thermodynamic models to underestimate Pb solubility while overestimating free Pb2+ activity in these systems, at least in the higher pH range, indicates that soluble Pb ion-pair formation constants and KSP values need correction in the models.  more » « less
Award ID(s):
1719875
PAR ID:
10325619
Author(s) / Creator(s):
; ; ;
Date Published:
Journal Name:
Minerals
Volume:
11
Issue:
6
ISSN:
2075-163X
Page Range / eLocation ID:
620
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; (, Environmental Science: Water Research & Technology)
    null (Ed.)
    This study investigated the reaction kinetics on the oxidative transformation of lead( ii ) minerals by free chlorine (HOCl) and free bromine (HOBr) in drinking water distribution systems. According to chemical equilibrium predictions, lead( ii ) carbonate minerals, cerussite PbCO 3(s) and hydrocerussite Pb 3 (CO 3 ) 2 (OH) 2(s) , and lead( ii ) phosphate mineral, chloropyromorphite Pb 5 (PO 4 ) 3 Cl (s) are formed in drinking water distribution systems in the absence and presence of phosphate, respectively. X-ray absorption near edge spectroscopy (XANES) data showed that at pH 7 and a 10 mM alkalinity, the majority of cerussite and hydrocerussite was oxidized to lead( iv ) mineral PbO 2(s) within 120 minutes of reaction with chlorine (3 : 1 Cl 2  : Pb( ii ) molar ratio). In contrast, very little oxidation of chloropyromorphite occurred. Under similar conditions, oxidation of lead( ii ) carbonate and phosphate minerals by HOBr exhibited a reaction kinetics that was orders of magnitude faster than by HOCl. Their end oxidation products were identified as mainly plattnerite β-PbO 2(s) and trace amounts of scrutinyite α-PbO 2(s) based on X-ray diffraction (XRD) and extended X-ray absorption fine structure (EXAFS) spectroscopic analysis. A kinetic model was established based on the solid-phase experimental data. The model predicted that in real drinking water distribution systems, it takes 0.6–1.2 years to completely oxidize Pb( ii ) minerals in the surface layer of corrosion scales to PbO 2(s) by HOCl without phosphate, but only 0.1–0.2 years in the presence of bromide (Br − ) due the catalytic effects of HOBr generation. The model also predicts that the addition of phosphate will significantly inhibit Pb( ii ) mineral oxidation by HOCl, but only be modestly effective in the presence of Br − . This study provides insightful understanding on the effect of residual disinfectant on the oxidation of lead corrosion scales and strategies to prevent lead release from drinking water distribution systems. 
    more » « less
  2. ; (, Geoenergy science and engineering)
    Predicting the transport of toxic metals in dolomite saline aquifers where petroleum produced water (PW) is commonly injected is important to prevent underground sources of drinking water contamination. This study presents new experimental results on the degree and impact of precipitation and sorption reactions on the transport of high concentrations of toxic metals (80-100 mg-Ba/L, 80-100 mg-Sr/L, 70-100 mg-Cd/L, 2-100 mg-Pb/L, and 80-100 mg-As/L) in dolomite injected with PW of variable alkalinity (0–200 mg/L), total dissolved solids (1700–77,000 mg/L), and pH (2–7). Changes in the elemental and mineral composition of dolomite surface were measured by BSEs SEM, SEM-EDS, and high-resolution XRD analyses. The results reveal a key role of alkalinity generated from the dissolution of dolomite. We show that a short initial stage where the removal of toxic metals is driven by the initial pH and alkalinity of PW is followed by a prolonged stage where the removal of toxic metals by sorption and precipitation reactions is driven by the alkalinity and pH that results from the kinetic dissolution of dolomite. Precipitated/coprecipitated metals were carbonate minerals reflecting the metal composition of PW. Attained removal levels of tested toxic metals from 1 L of PW using a dolomite core made of 200 g were >90% for Pb, >50% for As, >30% for Cd, and >5% for Ba and Sr. Apparently, the in-situ generation of alkalinity (carbonate ions) and sorption reactions of metals on dolomite catalyzes the precipitation of toxic metals as carbonate minerals. This catalytic effect of dolomite is different with PW and fresh water (FW) of low salinity (NaCl). Precipitation reactions are more prominent with FW than with PW, whereas sorption reactions are more prominent with PW than with FW. 
    more » « less
  3. ; (, Applied geochemistry)
    Alkalinity is a critical parameter for describing the composition, pH buffer capacity, and precipitation potential of petroleum produced water (PW). Besides salinity, alkalinity and metal concentrations are generally greater in PW than in freshwater (FW) and seawater. This study presents batch reaction experimental and simulation results showing that the removal of Ba, Sr, and Cd from PW by dolomite is mostly due to sorption reactions, with sorption reactions and thus removal levels being higher for Cd than for Ba and Sr. In contrast, we found that the removal of Pb and As from PW by dolomite is largely due to precipitation and coprecipitation reactions of carbonate minerals on dolomite. Analyses of changes in the morphology as well as in the elemental and mineral composition of dolomite surface, along with pH, alkalinity, and Ba, Sr, Cd, Pb, and As removal measurements using synthetic PW and FW containing high concentrations (∼100 mg/L) of single and mixture toxic metals and metalloids (Ba, Sr, Cd, Pb, and As) at different initial alkalinity and pH conditions, indicate that in addition to salinity, alkalinity and pH generated from the dissolution of dolomite controls the removal of Ba, Sr, Cd, Pb, and As from PW by dolomite. However, we found that their impact is different for each metal in PW and FW. Ba, Sr, and Cd removal by dolomite is 10, 2, and 4 times smaller in PW than in freshwater (FW), respectively. Whereas As removal is practically the same regardless of salinity. Moreover, this study reveals the need of thermodynamic data of complex carbonate minerals formed from the precipitation of Ba, Sr, Cd, Pb, and As to capture the effect of alkalinity on their removal from PW by dolomite. 
    more » « less
  4. ; ; ; ; ; ; ; (, European Association of Geochemistry)
    (Per)alkaline complexes and carbonatites evolve through a complex sequence of magmatic-hydrothermal processes. Most of them are overprinted by late auto-metasomatic processes which involves the mobilization, fractionation and/or enrichment of critical elements, such as the rare earth elements (REE) [1]. However, our current ability to predict the behavior of REE in high temperature aqueous fluids and interpret these natural systems using geochemical modeling depends on the availability of thermodynamic data for the REE minerals and aqueous species. Previous experimental work on REE solubility has focused on acidic aqueous fluids up to ~300 °C and considered chloride, fluoride and sulfate as important ligands for their transport [2]. However, magmatic-hydrothermal systems that form these critical mineral deposits may cover a wider range of fluid chemistries spanning acidic to alkaline pH as well as temperatures and pressures at which the fluids are supercritical. A few recently published studies have shown that other ligands (e.g., REE carbonates and/or combined fluoride species) could become important in near-neutral to alkaline fluids [3,4], and that REE mobility can also be increased in saline alkaline fluids reacted with fluorite [5]. Here we present new hydrothermal REE hydroxyl/chloride speciation data and REE phosphate/hydroxide minerals [6,7], calcite and fluorite solubility experiments as a function of pH, salinity and temperature. We use an integrated approach to link a wide array of experimental techniques (solubility, calorimetry, and spectroscopy) with thermodynamic optimizations using GEMSFITS [8], and present the development of a new experimental database for REE and its integration into the MINES thermodynamic database (https://geoinfo.nmt.edu/mines-tdb). The latter permits simulating hydrothermal fluid-rock interaction and ore-forming processes in critical mineral deposits to better understand the behavior of REE during metasomatism. 
    more » « less
  5. ; ; ; (, Langmuir)
    Gilbert C. Walker (Ed.)
    Unequivocally, Pb2+ as a harmful substance damaging children’s brain and nerve systems, thereby causing behavior and learning disabilities, should be detected much lower than the elevated blood lead for children, 240 nM, endorsed by US CDC considering the unknown neurotoxic effects, yet the ultralow detection limit up to sub-ppb level remains a challenge due to the intrinsically insufficient sensitivity in the current analytical techniques. Here, we present nanoemulsion (NE)-integrated single-entity electrochemistry (NI-SEE) toward ultrasensitive sensing of blood lead using Pb-ion-selective ionophores inside a NE, i.e., Pb2+-selective NE. Through the high thermodynamic selectivity between Pb2+ and Pb–ionophore IV, and the extremely large partition coefficient for the Pb2+–Pb–ionophore complex inside NEs, we modulate the selectivity and sensitivity of NI-SEE for Pb2+ sensing up to an unprecedentedly low detection limit, 20 ppt in aqueous solutions, and lower limit of quantitation, 40 ppb in blood serums. This observation is supported by molecular dynamics simulations, which clearly corroborate intermolecular interactions, e.g., H-bonding and π*–n, between the aromatic rings of Pb–ionophore and lone pair electrons of oxygen in dioctyl sebacate (DOS), plasticizers of NEs, subsequently enhancing the current intensity in NI-SEE. Moreover, the highly sensitive sensing of Pb2+ is enabled by the appropriate suppression of hydroxyl radical formation during NI-SEE under a cathodic potential applied to a Pt electrode. Overall, the experimentally demonstrated NI-SEE approach and the results position our new sensing technology as potential sensors for practical environmental and biomedical applications as well as a platform to interrogate the stoichiometry of target ion–ionophore recognition inside a NE as nanoreactors. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email