skip to main content


Title: Mentoring Future Science Leaders to Thrive
Mentoring is a well-known subject, but we know little about it as a science. We need to learn more about how to evolve mentorship. In this article, we propose some new directions for mentorship in the present and the future.  more » « less
Award ID(s):
2011577
NSF-PAR ID:
10326376
Author(s) / Creator(s):
; ; ;
Date Published:
Journal Name:
Trends in pharmacological sciences
Volume:
43
Issue:
6
ISSN:
0165-6147
Page Range / eLocation ID:
457-460
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. This Complete Evidence-Based Paper presents research about a layered peer mentorship program for undergraduate engineering students at a public urban research university and ways that students have made meaning from their mentorship experiences. This mentorship program began in Fall 2019 and has grown to include the following layers: (a) first-year students who receive mentorship, (b) sophomore- and junior-level students who serve as mentors (all of whom received mentorship during their first year), (c) junior- and senior-level students who serve as lead mentors who design the program for that academic year (including content, group meetings, service projects, meeting schedules, etc.), (d) a graduate student who mentors and supervises the lead mentors, and (e) a faculty member who oversees the overall program, provides general guidance, and advises all the students. We will describe ways in which the participating students have made meaning of their experience in the program, highlighting three key areas: (1) the web of relationships formed, which cohere into a community; (2) students’ transitions from receiving mentorship as first-year students to mentoring others in their sophomore and junior years; and (3) the feedback and iteration process by which the program has continuously developed, which forefronts student voice and agency. The paper will provide specific examples in each of the three key areas described, with a special focus on students’ own descriptions of the meaning they have made through their participation in the mentorship program. Recommendations will also be shared for those interested in implementing similar programs on their campuses. 
    more » « less
  2. This NSF IUSE project is on the Exploration and Design Tier and the Engaged Student Learning Track. It is aimed at better preparing the country’s professional workforce in the renaissance of U.S. skilled manufacturing by creating new personnel proficient in additive manufacturing (AM). AM is mainstream; it has the potential to bring jobs back to the U.S. and add to the nation’s global competitiveness. AM is the process of joining materials to make objects from 3D data in a layer upon layer fashion. The objectives are to develop, assess, revise, and disseminate an upper division course and laboratory, “Additive Manufacturing,” and to advance undergraduate and K-12 student research and creative inquiry activities as well as faculty expertise at three diverse participating universities: Texas Tech, California State-Northridge, and Kansas State. This research/pedagogical team contains a mechanical engineering professor at each university to develop and teach the course, as well as a sociologist trained in K-12 outreach, course assessment, and human subjects research to accurately determine the effects on K-12 and undergraduate students. The proposed course will cover extrusion-based, liquid-based, and powder-based AM processes. For each technology, fundamentals, applications, and advances will be discussed. Students will learn solutions to AM of polymers, metals, and ceramics. Two lab projects will be built to provide hands-on experiences on a variety of state-of-the-art 3D printers. To stimulate innovation, students will design, fabricate, and measure test parts, and will perform experiments to explore process limits and tackle real world problems. They will also engage K-12 students through video demonstrations and mentorship, thus developing presentation skills. Through the project, different pedagogical techniques and assessment tools will be utilized to assess and improve engineering education at both the undergraduate and K-12 levels through varied techniques: i) undergraduate module lesson plans that are scalable to K-12 levels, ii) short informational video lessons created by undergraduates for K-12 students with accompanying in-person mentorship activities at local high schools and MakerSpaces, iii) pre- and post-test assessments of undergraduates’ and K-12 participating students’ AM knowledge, skills, and perceptions of self-efficacy, and iv) focus groups to learn about student concerns/learning challenges. We will also track students institutionally and into their early careers to learn about their use of AM technology professionally. 
    more » « less
  3. This NSF IUSE project is on the Exploration and Design Tier and the Engaged Student Learning Track. It is aimed at better preparing the country’s professional workforce in the renaissance of U.S. skilled manufacturing by creating new personnel proficient in additive manufacturing (AM). AM is mainstream; it has the potential to bring jobs back to the U.S. and add to the nation’s global competitiveness. AM is the process of joining materials to make objects from 3D data in a layer upon layer fashion. The objectives are to develop, assess, revise, and disseminate an upper division course and laboratory, “Additive Manufacturing,” and to advance undergraduate and K-12 student research and creative inquiry activities as well as faculty expertise at three diverse participating universities: Texas Tech, California State Northridge, and Kansas State. This research/pedagogical team contains a mechanical engineering professor at each university to develop and teach the course, as well as a sociologist trained in K-12 outreach, course assessment, and human subjects research to accurately determine the effects on K-12 and undergraduate students. The proposed course will cover extrusion-based, liquid-based, and powder-based AM processes. For each technology, fundamentals, applications, and advances will be discussed. Students will learn solutions to AM of polymers, metals, and ceramics. Two lab projects will be built to provide hands-on experiences on a variety of state-of-the-art 3D printers. To stimulate innovation, students will design, fabricate, and measure test parts, and will perform experiments to explore process limits and tackle real world problems. They will also engage K-12 students through video demonstrations and mentorship, thus developing presentation skills. Through the project, different pedagogical techniques and assessment tools will be utilized to assess and improve engineering education at both the undergraduate and K-12 levels through varied techniques: i) undergraduate module lesson plans that are scalable to K-12 levels, ii) short informational video lessons created by undergraduates for K-12 students with accompanying in-person mentorship activities at local high schools and MakerSpaces, iii) pre- and post-test assessments of undergraduates’ and K-12 participating students’ AM knowledge, skills, and perceptions of self-efficacy, and iv) focus groups to learn about student concerns/learning challenges. We will also track students institutionally and into their early careers to learn about their use of AM technology professionally. 
    more » « less
  4. This S-STEM Project responds to a growing disparity among technology firms and the number of under-represented people in managerial and executive positions. Of particular interest is developing mentorship relationships and intrapreneurial competencies (i.e., entrepreneurship within established firms). Mentorship and increased skills preemptively aid in the retention and promotability of engineering undergraduates (upon entering the workforce). Specifically, the project was designed to produce electrical and computer engineering graduates with intrapreneurial knowledge and skills, which are characteristic of managers and innovators. Using the Intrepreneurial Competencies literature, the authors develop and test a multi-phased project among a diverse group of engineering undergraduates. The literature suggests enhancing intrapreneurial skills of students in engineering can be achieved through a combination of curricular and real-world experiences. Thus, this project incorporates faculty and industry mentorship, workforce development seminars, an industrial internship, entrepreneurship programs, and scholarships. Cohort 1 is comprised of a diverse group of 16 students (8 men, 8 women, 8 ethnic minorities). Students attended lectures by prominent engineering entrepreneurs, participated in a 3-day start-up weekend, attended engineering job fairs and two semesters of project-focused seminars, and read entrepreneurial and/or leadership-related books. Two primary data sets were collected utilizing a repeated measures design. Data were collected in the form of student reflections about being a mentee in the mentor relationships and interview data from mentors (i.e., engineering professionals). Students documented their mentoring sessions, which were reviewed by the project team. A primary theme that emerged from mentor reports was the effects of COVID-19, mostly how students felt about their coursework and how their industry mentors felt about their jobs. Although there was deep concern about the impacts of COVID-19, the students expressed a sense of growth and learning in spite of the virus. Students self-reported that the S-STEM experience was still highly beneficial, even as much of the coursework and mentoring for the latter half of the Spring semester had to be moved online. The students responded well, with the average semester GPA rising from 3.483 in the Fall to 3.774 in the Spring. Second, data were collected by survey pre- and post-semester to measure improvements in Intrapreneurial Competencies. The “Intrapreneurial Competencies Measurement Scale”(ICMS) by Vargas-Halabi et al. was used to measure and evaluate the development of intrapreneurial competencies, which include: (1) Opportunity promoter, (2) Proactivity, (3) Flexibility, (4) Drive, and (5) Risk taking. Each of the six categories of the ICMS is divided into 3-9 sub-categories to assess skill and mindset in the six general categories. In answering the questions on the ICMS test, students evaluated their proficiency in each of the areas. Growth was evident for almost all the categories and sub-categories across each of the three data-gathering points. 
    more » « less
  5. This study expands on our prior work of the Research Experience for Undergraduates (REU) SITE program to provide data on participant preparation for success in graduate school and their perceptions of the program. In the first two studies from our initial cohort, we summarized that we effectively provided an independent research experience, increased participants perception of preparedness for success in the graduate application process and graduate school and increased their ability to communicate about Biomechanics and Mechanobiology (BMMB)1. In the follow up study we showed that by the end of the program students believed they were better prepared for success in graduate school, two students co-authored publications from their projects, and the majority were enrolled in a graduate program2. Here we share data across our first two cohorts which expands our outcomes associated with graduate school preparation and student perceptions of the REU SITE program. We used our site-licensed online survey tool Qualtrics to administer the surveys for data collection. We used the same pre- and post-survey data to assess changes for both ten student cohorts over the 10-week period. The data were analyzed using a paired t-test from GraphPad Prism 9.3.0 software. This study confirmed the findings from the first two studies while highlighting new information. The new analysis conducted across both cohorts showed participation in the program influenced student interest in applying to graduate school p< 0.05. Additionally, the data show that participants felt more prepared to conduct independent research after participating p<0.05. Of the twenty participants the twelve students who have graduated or will be graduating before summer 2023 are enrolled in a graduate program or have applied for admission. Six of those yet to graduate reported they plan to pursue a graduate degree after completing their BS degree. Additionally, students felt the program prepared them to find and read research articles p<0.01 and participate at a conference p<0.05, skills that will be beneficial for success in a graduate program. Ninety-five percent of the participants indicated the REU SITE met or exceeded their expectations and would recommend the program to others. Similarly, 95% were satisfied with the mentorship of their graduate ambassador and 100% indicated they were satisfied with the mentorship of their faculty. Additionally, we were excited to find that after an adjustment to our program after the first cohort, the second cohort felt prepared to contribute to the field of BMMB p<0.05. This was an objective of the program that was not achieved with the first cohort. Lastly, 85% of participants were from underrepresented minority (URM) backgrounds and 70% were female. Thus, the enrollment of our participants in graduate programs continues to enhance diversity in engineering and the field of BMMB. Going forward we will continue to track the progress of participants and the careers they choose after completion of their graduate degrees. We will also continue to use student feedback to improve the experience for participants. 
    more » « less