Predicting machined surface roughness is critical for estimating a part’s performance characteristics such as susceptibility to fatigue and corrosion. Prior studies have indicated that power consumed at the tool-chip interface may represent an indicator for the surface integrity of the machining process. However, no quantita-tive association has been reported between the machining power and surface roughness due to a lack of data to develop predictive models. This paper presents a data synthesis method to address this gap. Specifically, a conditional generative adversarial network (CGAN) is developed to synthesize power signals associated with varying process parameter combinations. The quality of the synthesized signals is evaluated against experimentally measured power signals by examining the consistency in: 1) the spatial pattern of the signals induced by the cutting process as shown in the frequency domain, and 2) the temporal pattern as shown in the clustering of the synthesized and measured signals corresponding to the same parameter combination. The synthesized signals are then used to augment the measured signals and develop a convolutional neural network (CNN) for predicting the machined surface roughness. Experiments performed using H13 tool steel have shown that data augmentation by CGAN has effectively reduced the error of the surface roughness prediction from 58 %, when no synthetic data is used for CNN training, to 9.1 % when 250 synthetic samples are used. The results demonstrate the effectiveness of CGAN as a data augmentation method and CNN for mapping machining power to surface roughness.
more »
« less
Creation of Functionally Graded Glass Channels by Electrochemical Discharge Machining Process: A Feasibility Study
Functionally graded surfaces — surfaces with properties that are engineered to have spatial variations — have numerous applications such as micropumps, auto-mixers, and flow control for lab-on-chip devices. Manufacturing of functionally graded surfaces is an increasingly important topic of research. This study investigates the feasibility of creating a functionally graded surface during channeling of borosilicate glass by the electrochemical discharge machining (ECDM) process. The ability to create surface roughness gradients in microchannels during the machining process was demonstrated by modifying the input voltage, tool feed rate, and tool rotation speed. Microchannels with graded surface roughness having Ra values ranging from 0.35 to 4.07 μm were successfully machined on borosilicate glass by ECDM. Surface profiles were obtained via a stylus profilometer, and roughness values were calculated after detrending and applying a Gaussian filter. To demonstrate the process versatility, micro channels with increasing and decreasing Ra values were machined, one increasing from 1.43 μm to 4.07 μm, another decreasing from 3.29 μm to 1.10 μm. To demonstrate the process repeatability, a micro channel with similar surface roughness on both ends and a lower Ra value in the center was created. In this channel, the Ra value at the start is 0.35 μm, reducing to 0.24 μm, then rising again to 0.38 μm in the final section.
more » « less- Award ID(s):
- 1833112
- PAR ID:
- 10329866
- Date Published:
- Journal Name:
- ASME 2021 16th International Manufacturing Science and Engineering Conference
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Precision glass molding is a viable process for the cost-effective volume production of freeform optics. Process development is complex, requiring iterative trials of mold manufacture and metrology, glass mold prototyping, metrology and functional testing. This paper describes the first iteration in the development of a process for an Alvarez lens for visible light. The challenges of this optic are extremely tight band-RMS tolerances on a freeform shape over a maximum clear aperture of 45 mm, a 16:1 aspect ratio and a freeform departure of 329 micrometers. A freeform glass mold for an Alvarez lens was manufactured by coordinated-axis diamond turning in a mold substrate using a custom tool error correction method. The results of prototype precision glass molding are also reported. Mold surfaces and molded optical surfaces are analyzed with scanning white light interferometry. A surface roughness of approximately 3 nm RMS is obtained for both the mold substrate and the glass optic with high-fidelity reproduction of micro-surface structure in the glass. These measurements also identify challenging areas, particularly the presence of mid-spatial frequency errors on the optic originating from the machine thermal control system. The form of the molds was also measured with a profilometer; however, the mold surface does not agree with the expected prescription with an overall deviation in form of approximately 10 μm. The machining process is expected to have sub-micrometer error and the sources of this discrepancy are still being determined. Metrology of the glass optics is currently in progress.more » « less
-
null (Ed.)Abstract This article is written as a tribute to Professor Frederick Fongsun Ling 1927–2014. Single-point diamond machining, a subset of a broader class of processes characterized as ultraprecision machining, is used for the creation of surfaces and components with nanometer scale surface roughnesses, and submicrometer scale geometrical form accuracies. Its initial development centered mainly on the machining of optics for energy and defense related needs. Today, diamond machining has broad applications that include the manufacture of precision freeform optics for defense and commercial applications, the structuring of surfaces for functional performance, and the creation of molds used for the replication of a broad range of components in plastic or glass. The present work focuses on a brief review of the technology. First addressed is the state of current understanding of the mechanics that govern the process including the resulting forces, energies and the size effect, forces when cutting single crystals, and resulting cutting temperatures. Efforts to model the process are then described. The workpiece material response when cutting ductile and brittle materials is also included. Then the present state of the art in machine tools, diamond tools and tool development, various cutting configurations used, and some examples of diamond machined surfaces and components are presented. A discussion on the measurement of surface topography, geometrical form, and subsurface damage of diamond machined surfaces is also included.more » « less
-
Abstract Single crystal Ge is a semiconductor that has broad applications, especially in manipulation of infrared light. Diamond machining enables the efficient production of surfaces with tolerances required by the optical industry. During machining of anisotropic single crystals, the cutting direction with respect to the in-plane lattice orientation plays a fundamental role in the final quality of the surface and subsurface. In this study, on-axis face turning experiments were performed on an undoped (111)Ge wafer to investigate the effects of crystal anisotropy and feedrate on the surface and subsurface conditions. Atomic force microscopy and scanning white light interferometry were used to characterize the presence of brittle fracture on the machined surfaces and to evaluate the resultant surface roughness. Raman spectroscopy was performed to evaluate the residual stresses and lattice disorder induced by the tool during machining. Nanoindentation with Berkovich and cube corner indenter tips was performed to evaluate elastic modulus, hardness, and fracture toughness of the machined surfaces and to study their variations with feedrate and cutting direction. Post-indentation studies of selected indentations were also performed to characterize the corresponding quasi-plasticity mechanisms. It was found that an increase of feedrate produced a rotation of the resultant force imparted by the tool indicating a shift from indentation-dominant to cutting-dominant behavior. Fracture increased with the feedrate and showed a higher propensity when the cutting direction belonged to the <112¯> family.more » « less
-
This research studied the effect of channel roughness on micro-droplet distributions in internal minimum quantity lubrication for effective machining. Mixtures of different oils and air were flown though internal channels with simulated different roughness: as fabricated, partially threaded, and fully threaded. The airborne droplets were collected, analyzed, and compared with simulated results by computational fluid dynamics. For low-viscous lubricant, the rough channel surface helped to break large droplets in the boundary layer into smaller droplets and reintroduce them into the main downstream flow. The opposite trend was found for the higher viscous lubricant. The study also performed chemical etching to roughen selected surfaces of carbide cutting tools. The synergy of hand and ultrasonic agitation successfully roughened a carbide surface within twelve minutes. Scanning electron microscopy examination showed deep etching that removed all grinding marks on a WC–Co cutting tool surface.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Conference Paper:
- https://doi.org/10.1115/MSEC2021-63916
