Astronomical surveys have discovered thousands of transiting exoplanets, revealing that rocky planets are common in the galaxy. A planet's interior chemistry is frequently inferred by average density, described by mass‐radius (M‐R) relationships. However, M‐R relationships give rise to non‐unique interpretations of a planet's interior composition, an issue that limits our ability to characterize far‐away worlds. We present experimental and density functional theoretical results addressing the influence of an ultra‐reducing (oxygen‐poor) interior chemistry on rocky mantle phases and discuss the possible implications for atmospheric observables. We show that silicon carbide (SiC) and molecular nitrogen (N2) react to form solid silicon nitride (γ‐Si3N4) at high pressures and high temperatures in a laser‐heated diamond‐anvil cell, consistent with ab initio computations. Si3N4remains stable under extreme conditions and when quenched to ambient conditions. As SiC is a common compound found under very reducing conditions, these results indicate that nitrogen may form solid phases in an oxygen‐poor rocky planet. If, by sequestering nitrogen in a planet's mantle, the distribution of nitrogen between a planet's interior and atmosphere is altered (i.e., a nitrogen‐rich mantle and nitrogen‐poor atmosphere), these results indicate that there may be atmospheric observables connected to the mantle‐redox state of a rocky planet besides the oxygen‐containing phases ubiquitous in exoplanet literature.
Structure and density of silicon carbide to 1.5 TPa and implications for extrasolar planets
Abstract There has been considerable recent interest in the high-pressure behavior of silicon carbide, a potential major constituent of carbon-rich exoplanets. In this work, the atomic-level structure of SiC was determined through in situ X-ray diffraction under laser-driven ramp compression up to 1.5 TPa; stresses more than seven times greater than previous static and shock data. Here we show that the B1-type structure persists over this stress range and we have constrained its equation of state (EOS). Using this data we have determined the first experimentally based mass-radius curves for a hypothetical pure SiC planet. Interior structure models are constructed for planets consisting of a SiC-rich mantle and iron-rich core. Carbide planets are found to be ~10% less dense than corresponding terrestrial planets.
more »
« less
- Award ID(s):
- 2020249
- NSF-PAR ID:
- 10332399
- Date Published:
- Journal Name:
- Nature Communications
- Volume:
- 13
- Issue:
- 1
- ISSN:
- 2041-1723
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Abstract -
ABSTRACT The detection of the 11.3$\, {\rm \mu m}$ emission feature characteristic of the Si–C stretch in carbon-rich evolved stars reveals that silicon carbide (SiC) dust grains are condensed in the outflows of carbon stars. SiC dust could be a significant constituent of interstellar dust since it is generally believed that carbon stars inject a considerable amount of dust into the interstellar medium (ISM). The presence of SiC dust in the ISM is also supported by the identification of pre-solar SiC grains of stellar origin in primitive meteorites. However, the 11.3$\,\mu {\rm m}$ absorption feature of SiC has never been seen in the ISM, and oxidative destruction of SiC is often invoked. In this work, we quantitatively explore the destruction of interstellar SiC dust through oxidation based on molecular dynamics simulations and density functional theory calculations. We find that the reaction of an oxygen atom with SiC molecules and clusters is exothermic and could cause CO-loss. Nevertheless, even if this is extrapolable to bulk SiC dust, the destruction rate of SiC dust through oxidation could still be considerably smaller than the (currently believed) injection rate from carbon stars. Therefore, the lack of the 11.3$\,\mu{\rm m}$ absorption feature of SiC dust in the ISM remains a mystery. A possible solution may lie in the currently believed stellar injection rate of SiC (which may have been overestimated) and/or the size of SiC dust (which may actually be considerably smaller than submicron in size).more » « less
-
We have conducted laboratory experiments with analog crystalline silicon carbide (SiC) grains using transmission electron microscopy (TEM) and electron energy-loss spectroscopy (EELS). The 3C polytype of SiC was used—the type commonly produced in the envelopes of asymptotic giant branch (AGB) stars. We rapidly heated small (∼50 nm) synthetic SiC crystals under vacuum to ∼1300 K and bombarded them with 150 keV Xe ions. TEM imaging and EELS spectroscopic mapping show that such heating and bombardment leaches silicon from the SiC surface, creating layered graphitic sheets. Surface defects in the crystals were found to distort the six-membered rings characteristic of graphite, creating hemispherical structures with diameters matching that of C60. Such nonplanar features require the formation of five-membered rings. We also identified a circumstellar grain, preserved inside the Murchison meteorite, that contains the remnant of an SiC core almost fully encased by graphite, contradicting long-standing thermodynamic predictions of material condensation. Our combined laboratory data suggest that C60 can undergo facile formation from shock heating and ion bombardment of circumstellar SiC grains. Such heating/bombardment could occur in the protoplanetary nebula phase, accounting for the observation of C60 in these objects, in planetary nebulae (PNs) and other interstellar sources receiving PN ejecta. The synthesis of C60 in astronomical sources poses challenges, as the assembly of 60 pure carbon atoms in an H-rich environment is difficult. The formation of C60 from the surface decomposition of SiC grains is a viable mechanism that could readily occur in the heterogeneous, hydrogen-dominated gas of evolved circumstellar shells.more » « less
-
ABSTRACT Certain types of silicon carbide (SiC) grains, e.g. SiC-X grains, and low density (LD) graphites are C-rich presolar grains that are thought to have condensed in the ejecta of core-collapse supernovae (CCSNe). In this work, we compare C, N, Al, Si, and Ti isotopic abundances measured in presolar grains with the predictions of 21 CCSN models. The impact of a range of SN explosion energies is considered, with the high energy models favouring the formation of a C/Si zone enriched in 12C, 28Si, and 44Ti. Eighteen of the 21 models have H ingested into the He-shell and different abundances of H remaining from such H-ingestion. CCSN models with intermediate to low energy (that do not develop a C/Si zone) cannot reproduce the 28Si and 44Ti isotopic abundances in grains without assuming mixing with O-rich CCSN ejecta. The most 28Si-rich grains are reproduced by energetic models when material from the C/Si zone is mixed with surrounding C-rich material, and the observed trends of the 44Ti/48Ti and 49Ti/48Ti ratios are consistent with the C-rich C/Si zone. For the models with H-ingestion, high and intermediate explosion energies allow the production of enough 26Al to reproduce the 26Al/27Al measurements of most SiC-X and LD graphites. In both cases, the highest 26Al/27Al ratio is obtained with H still present at XH ≈ 0.0024 in He-shell material when the SN shock is passing. The existence of H in the former convective He-shell points to late H-ingestion events in the last days before massive stars explode as a supernova.more » « less
-
Abstract High-precision placement of rare-earth ions in scalable silicon-based nanostructured materials exhibiting high photoluminescence (PL) emission, photostable and polarized emission, and near-radiative-limited excited state lifetimes can serve as critical building blocks toward the practical implementation of devices in the emerging fields of nanophotonics and quantum photonics. Introduced herein are optical nanostructures composed of arrays of ultrathin silicon carbide (SiC) nanowires (NWs) that constitute scalable one-dimensional NW-based photonic crystal (NW-PC) structures. The latter are based on a novel, fab-friendly, nanofabrication process. The NW arrays are grown in a self-aligned manner through chemical vapor deposition. They exhibit a reduction in defect density as determined by low-temperature time-resolved PL measurements. Additionally, the NW-PC structures enable the positioning of erbium (Er 3+ ) ions with an accuracy of 10 nm, an improvement on the current state-of-the-art ion implantation processes, and allow strong coupling of Er 3+ ions in NW-PC. The NW-PC structure is pivotal in engineering the Er 3+ -induced 1540-nm emission, which is the telecommunication wavelength used in optical fibers. An approximately 60-fold increase in the room-temperature Er 3+ PL emission is observed in NW-PC compared to its thin-film analog in the linear pumping regime. Furthermore, 22 times increase in the Er 3+ PL intensity per number of exited Er ions in NW-PC was observed at saturation while using 20 times lower pumping power. The NW-PC structures demonstrate broadband and efficient excitation characteristics for Er 3+ , with an absorption cross-section (~2 × 10 −18 cm 2 ) two-order larger than typical benchmark values for direct absorption in rare-earth-doped quantum materials. Experimental and simulation results show that the Er 3+ PL is photostable at high pumping power and polarized in NW-PC and is modulated with NW-PC lattice periodicity. The observed characteristics from these technologically friendly nanophotonic structures provide a promising route to the development of scalable nanophotonics and formation of single-photon emitters in the telecom optical wavelength band.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1038/s41467-022-29762-y
