skip to main content

Explore Research Products in the NSF-PAR

  • NSF Public Access
  • Search Results
  • Simplified and Detailed Analysis of Data Center Particulate Contamination at Server and Room Level Using Computational Fluid Dynamics
Title: Simplified and Detailed Analysis of Data Center Particulate Contamination at Server and Room Level Using Computational Fluid Dynamics
Abstract Continuous rise in cloud computing and other web-based services propelled the data center proliferation seen over the past decade. Traditional data centers use vapor-compression-based cooling units that not only reduce energy efficiency but also increase operational and initial investment costs due to involved redundancies. Free air cooling and airside economization can substantially reduce the information technology equipment (ITE) cooling power consumption, which accounts for approximately 40% of energy consumption for a typical air-cooled data center. However, this cooling approach entails an inherent risk of exposing the ITE to harmful ultrafine particulate contaminants, thus, potentially reducing the equipment and component reliability. The present investigation attempts to quantify the effects of particulate contamination inside the data center equipment and ITE room using computational fluid dynamics (CFD). An analysis of the boundary conditions to be used was done by detailed modeling of ITE and the data center white space. Both two-dimensional and three-dimensional simulations were done for detailed analysis of particle transport within the server enclosure. An analysis of the effect of the primary pressure loss obstructions like heat sinks and dual inline memory modules inside the server was done to visualize the localized particle concentrations within the server. A room-level simulation was then conducted to identify the most vulnerable locations of particle concentration within the data center space. The results show that parameters such as higher velocities, heat sink cutouts, and higher aspect ratio features within the server tend to increase the particle concentration inside the servers.  more » « less
Award ID(s):
1738811
NSF-PAR ID:
10332512
Author(s) / Creator(s):
; ; ; ;
Date Published:
Journal Name:
Journal of Electronic Packaging
Volume:
144
Issue:
2
ISSN:
1043-7398
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ( , ASME 2020 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems)
    null (Ed.)
    Abstract

    Modern-day data center administrators are finding it increasingly difficult to lower the costs incurred in mechanical cooling of their IT equipment. This is especially true for high-performance computing facilities like Artificial Intelligence, Bitcoin Mining, and Deep Learning, etc. Airside Economization or free air cooling has been out there as a technology for a long time now to reduce the mechanical cooling costs. In free air cooling, under favorable ambient conditions of temperature and humidity, outside air can be used for cooling the IT equipment. In doing so, the IT equipment is exposed to sub-micron particulate/gaseous contaminants that might enter the data center facility with the cooling airflow.

    The present investigation uses a computational approach to model the airflow paths of particulate contaminants entering inside the IT equipment using a commercially available CFD code. A Discrete Phase Particle modeling approach is chosen to calculate trajectories of the dispersed contaminants. Standard RANS approach is used to model the airflow in the airflow and the particles are superimposed on the flow field by the CFD solver using Lagrangian particle tracking. The server geometry was modeled in 2-D with a combination of rectangular and cylindrical obstructions. This was done to comprehend the effect of change in the obstruction type and aspect ratio on particle distribution. Identifying such discrete areas of contaminant proliferation based on concentration fields due to changing geometries will help with the mitigation of particulate contamination related failures in data centers.

     
    more » « less
  2. ; ; ( , ASME 2017 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems)
    Over the past few years, there has been an ever increasing rise in energy consumption by IT equipment in Data Centers. Thus, the need to minimize the environmental impact of Data Centers by optimizing energy consumption and material use is increasing. In 2011, the Open Compute Project was started which was aimed at sharing specifications and best practices with the community for highly energy efficient and economical data centers. The first Open Compute Server was the ‘ Freedom’ Server. It was a vanity free design and was completely custom designed using minimum number of components and was deployed in a data center in Prineville, Oregon. Within the first few months of operation, considerable amount of energy and cost savings were observed. Since then, progressive generations of Open Compute servers have been introduced. Initially, the servers used for compute purposes mainly had a 2 socket architecture. In 2015, the Yosemite Open Compute Server was introduced which was suited for higher compute capacity. Yosemite has a system on a chip architecture having four CPUs per sled providing a significant improvement in performance per watt over the previous generations. This study mainly focuses on air flow optimization in Yosemite platform to improve its overall cooling performance. Commercially available CFD tools have made it possible to do the thermal modeling of these servers and predict their efficiency. A detailed server model is generated using a CFD tool and its optimization has been done to improve the air flow characteristics in the server. Thermal model of the improved design is compared to the existing design to show the impact of air flow optimization on flow rates and flow speeds which in turn affects CPU die temperatures and cooling power consumption and thus, impacting the overall cooling performance of the Yosemite platform. Emphasis is given on effective utilization of fans in the server as compared to the original design and improving air flow characteristics inside the server via improved ducting. 
    more » « less
  3. ; ; ; ( , Proceedings of the ASME 2018 International Mechanical Engineering Congress and Exposition)
    In typical data centers, the servers and IT equipment are cooled by air and almost half of total IT power is dedicated to cooling. Hybrid cooling is a combined cooling technology with both air and water, where the main heat generating components are cooled by water or water-based coolants and rest of the components are cooled by air supplied by CRAC or CRAH. Retrofitting the air-cooled servers with cold plates and pumps has the advantage over thermal management of CPUs and other high heat generating components. In a typical 1U server, the CPUs were retrofitted with cold plates and the server tested with raised coolant inlet conditions. The study showed the server can operate with maximum utilization for CPUs, DIMMs, and PCH for inlet coolant temperature from 25–45 °C following the ASHRAE guidelines. The server was also tested for failure scenarios of the pumps and fans with reducing numbers of fans and pumps. To reduce cooling power consumption at the facility level and increase air-side economizer hours, the hybrid cooled server can be operated at raised inlet air temperatures. The trade-off in energy savings at the facility level due to raising the inlet air temperatures versus the possible increase in server fan power and component temperatures is investigated. A detailed CFD analysis with a minimum number of server fans can provide a way to find an operating range of inlet air temperature for a hybrid cooled server. Changes in the model are carried out in 6SigmaET for an individual server and compared to the experimental data to validate the model. The results from this study can be helpful in determining the room level operating set points for data centers housing hybrid cooled server racks. 
    more » « less
  4. ( , ITHERM)
    The role of data centers in modern life has expanded rapidly over the past decades. In addition, this expansion has resulted in a significant increase in the share of data centers in total energy consumption of the world. Thus, reliability and energy efficiency have become a common concern in data centers. Information technology equipment (ITE) and cooling infrastructure are the largest power consumer in data centers. The cooling power in a data center depends on the amount of heat dissipated by ITE. Therefore, the thermal design of the ITE impacts not only the ITE power but also affects the infrastructure power and has a significant role in the overall efficiency of data centers. This paper studies the impact of fans location and airflow balancing on the thermal performance and power of a server. A detailed computational fluid dynamic (CFD) model of the server is built, calibrated and validated using experimental test results. Next, impacts of moving fans to the rear side of the chassis on the flow rate and temperature of components are investigated. Special attention is given to controlling airflow through power supplies. 
    more » « less
  5. ; ; ( , ASME 2017 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems)
    Data centers house a variety of compute, storage, network IT hardware where equipment reliability is of utmost importance. Heat generated by the IT equipment can substantially reduce its service life if Tjmax, maximum temperature that the microelectronic device tolerates to guarantee reliable operation, is exceeded. Hence, data center rooms are bound to maintain continuous conditioning of the cooling medium becoming large energy consumers. The objective of this work is to introduce and evaluate a new end-of-aisle cooling design which consists of three cooling configurations. The key objectives of close-coupled cooling are to enable a controlled cooling of the IT equipment, flexible as well as modular design, and containment of hot air exhaust from the cold air. The thermal performance of the proposed solution is evaluated using CFD modeling. A computational model of a small size data center room has been developed. Larger axial fans are selected and placed at rack-level which constitute the rack-fan wall design. The model consists of 10 electronic racks each dissipating a heat load of 8kw. The room is modeled to be hot aisle containment i.e. the hot air exhaust exiting for each row is contained and directed within a specific volume. Each rack has passive IT with no server fans and the servers are cooled by means of rack fan wall. The cold aisle is separated with hot aisle by means of banks of heat exchangers placed on the either sides of the aisle containment. Based on the placement of rack fans, the design is divided to three sub designs — case 1: passive heat exchangers with rack fan walls; case 2: active heat exchangers (HXs coupled with fans) with rack fan walls; case 3: active heat exchangers (hxs coupled with fans) with no rack fans. The cooling performance is calculated based on the thermal and flow parameters obtained for all three configurations. The computational data obtained has shown that the case 1 is used only for lower system resistance IT. However, case 2 and Case 3 can handle denser IT systems. Case 3 is the design that can consume lower fan energy as well as handle denser IT systems. The paper also discusses the cooling behavior of each type of design. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email