skip to main content


Title: How Does the Choice of the Lower Boundary Conditions in Large-Eddy Simulations Affect the Development of Dispersive Fluxes Near the Surface?
Abstract Large-eddy simulations (LES) are an important tool for investigating the longstanding energy-balance-closure problem, as they provide continuous, spatially-distributed information about turbulent flow at a high temporal resolution. Former LES studies reproduced an energy-balance gap similar to the observations in the field typically amounting to 10–30% for heights on the order of 100 m in convective boundary layers even above homogeneous surfaces. The underestimation is caused by dispersive fluxes associated with large-scale turbulent organized structures that are not captured by single-tower measurements. However, the gap typically vanishes near the surface, i.e. at typical eddy-covariance measurement heights below 20 m, contrary to the findings from field measurements. In this study, we aim to find a LES set-up that can represent the correct magnitude of the energy-balance gap close to the surface. Therefore, we use a nested two-way coupled LES, with a fine grid that allows us to resolve fluxes and atmospheric structures at typical eddy-covariance measurement heights of 20 m. Under different stability regimes we compare three different options for lower boundary conditions featuring grassland and forest surfaces, i.e. (1) prescribed surface fluxes, (2) a land-surface model, and (3) a land-surface model in combination with a resolved canopy. We show that the use of prescribed surface fluxes and a land-surface model yields similar dispersive heat fluxes that are very small near the vegetation top for both grassland and forest surfaces. However, with the resolved forest canopy, dispersive heat fluxes are clearly larger, which we explain by a clear impact of the resolved canopy on the relationship between variance and flux–variance similarity functions.  more » « less
Award ID(s):
1822420
NSF-PAR ID:
10339152
Author(s) / Creator(s):
; ; ;
Date Published:
Journal Name:
Boundary-Layer Meteorology
Volume:
182
Issue:
1
ISSN:
0006-8314
Page Range / eLocation ID:
1 to 27
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Abstract

    Forest canopies play a critical role in affecting momentum and scalar transfer. Although there have been recent advances in numerical simulations of turbulent flows and scalar transfer across plant canopies and the atmosphere interface, few models have incorporated all important physical and physiological processes in subcanopy layers. Here we describe and evaluate an advanced multiple‐layer canopy module (MCANOPY), which is developed based largely on the Community Land Model version 4.5 and then coupled with the Weather Research and Forecasting model with large‐eddy simulations (WRF‐LES). The MCANOPY includes a suite of subcanopy processes, including radiation transfer, photosynthesis, canopy layer energy balance, momentum drag, and heat, water vapor, and CO2exchange between canopy layers and the canopy atmosphere. Numerical schemes for heat and water transport in soil, ground surface energy balance, and soil respiration are also included. Both the stand‐alone MCANOPY and the coupled system (the WRF‐LES‐MCANOPY) are evaluated against data measured in the Canopy Horizontal Array Turbulence Study field experiment. The MCANOPY performs reasonably well in reproducing vertical profiles of mean and turbulent flows as well as second‐order statistical quantities including heat and scalar fluxes within the canopy under unstable stability conditions. The coupled WRF‐LES‐MCANOPY captures major features of canopy edge flows under both neutral and unstable conditions. Limitations of the MCANOPY are discussed for our further work. Our results suggest that our model can be a promising modeling system for a variety of applications to study canopy flows and scalar transport (e.g., CO2).

     
    more » « less
  2. Abstract

    Populated urban areas along many coastal regions are vulnerable to landfalling tropical cyclones (TCs). To the detriment of surface parameterizations in mesoscale models, the complexities of turbulence at high TC wind speeds in urban canopies are presently poorly understood. Thus, this study explores the impacts of urban morphology on TC-strength winds and boundary layer turbulence in landfalling TCs. To better quantify how urban structures interact with TC winds, large-eddy simulations (LESs) are conducted with the Cloud Model 1 (CM1). This implementation of CM1 includes immersed boundary conditions (IBCs) to represent buildings and eddy recycling to maintain realistic turbulent flow perturbations. Within the IBCs, an idealized coastal city with varying scales is introduced. TC winds impinge perpendicularly to the urbanized coastline. Numerical experiments show that buildings generate distinct, intricate flow patterns that vary significantly as the city structure is varied. Urban IBCs produce much stronger turbulent kinetic energy than is produced by conventional surface parameterizations. Strong effective eddy viscosity due to resolved eddy mixing is displayed in the wake of buildings within the urban canopy, while deep and enhanced effective eddy viscosity is present downstream. Such effects are not seen in a comparison LES using a simple surface parameterization with high roughness values. Wind tunneling effects in streamwise canyons enhance pedestrian-level winds well beyond what is possible without buildings. In the arena of regional mesoscale modeling, this type of LES framework with IBCs can be used to improve parameters in surface and boundary layer schemes to more accurately represent the drag coefficient and the eddy viscosity in landfalling TC boundary layers.

    Significance Statement

    This is among the first large-eddy simulation model studies to examine the impacts of tropical cyclone–like winds around explicitly resolved buildings. This work is a step forward in bridging the gap between engineering studies that use computational fluid dynamics models or laboratory experiments for flow through cities and mesoscale model simulations of landfalling tropical cyclones that use surface parameterizations specialized for urban land use.

     
    more » « less
  3. Single point eddy covariance measurements of the Earth’s surface energy budget frequently identify an imbalance between available energy and turbulent heat fluxes. While this imbalance lacks a definitive explanation, it is nevertheless a persistent finding from single-site measurements; one with implications for atmospheric and ecosystem models. This has led to a push for intensive field campaigns with temporally and spatially distributed sensors to help identify the causes of energy balance non-closure. Here we present results from the Chequamegon Heterogeneous Ecosystem Energy-balance Study Enabled by a High-density Extensive Array of Detectors 2019 (CHEESEHEAD19)—an observational experiment designed to investigate how the Earth’s surface energy budget responds to scales of surface spatial heterogeneity over a forest ecosystem in northern Wisconsin. The campaign was conducted from June–October 2019, measuring eddy covariance (EC) surface energy fluxes using an array of 20 towers and a low-flying aircraft. Across the domain, energy balance residuals were found to be highest during the afternoon, coinciding with the period of surface heterogeneity-driven mesoscale motions. The magnitude of the residual varied across different sites in relation to the vegetation characteristics of each site. Both vegetation height and height variability showed positive relationships with the residual magnitude. During the seasonal transition from latent heat-dominated summer to sensible heat-dominated fall the magnitude of the energy balance residual steadily decreased, but the energy balance ratio remained constant at 0.8. This was due to the different components of the energy balance equation shifting proportionally, suggesting a common cause of non-closure across the two seasons. Additionally, we tested the effectiveness of measuring energy balance using spatial EC. Spatial EC, whereby the covariance is calculated based on deviations from spatial means, has been proposed as a potential way to reduce energy balance residuals by incorporating contributions from mesoscale motions better than single-site, temporal EC. Here we tested several variations of spatial EC with the CHEESEHEAD19 dataset but found little to no improvement to energy balance closure, which we attribute in part to the challenging measurement requirements of spatial EC.

     
    more » « less
  4. Abstract

    The water vapor transport associated with latent heat flux (LE) in the planetary boundary layer (PBL) is critical for the atmospheric hydrological cycle, radiation balance, and cloud formation. The spatiotemporal variability of LE and water vapor mixing ratio (rv) are poorly understood due to the scale‐dependent and nonlinear atmospheric transport responses to land surface heterogeneity. Here, airborne in situ measurements with the wavelet technique are utilized to investigate scale‐dependent relationships among LE, vertical velocity (w) variance (), andrvvariance () over a heterogeneous surface during the Chequamegon Heterogeneous Ecosystem Energy‐balance Study Enabled by a High‐density Extensive Array of Detectors 2019 (CHEESEHEAD19) field campaign. Our findings reveal distinct scale distributions of LE, , and at 100 m height, with a majority scale range of 120 m–4 km in LE, 32 m–2 km in , and 200 m–8 km in . The scales are classified into three scale ranges, the turbulent scale (8–200 m), large‐eddy scale (200 m–2 km), and mesoscale (2–8 km) to evaluate scale‐resolved LE contributed by and . The large‐eddy scale in PBL contributes over 70% of the monthly mean total LE with equal parts (50%) of contributions from and . The monthly temporal variations mainly come from the first two major contributing classified scales in LE, , and . These results confirm the dominant role of the large‐eddy scale in the PBL in the vertical moisture transport from the surface to the PBL, while the mesoscale is shown to contribute an additional ∼20%. This analysis complements published scale‐dependent LE variations, which lack detailed scale‐dependent vertical velocity and moisture information.

     
    more » « less
  5. Abstract

    Detailed assessment of small‐scale heterogeneity in local surface water balance is essential to accurate estimation of evapotranspiration in semiarid climates. However, meteorological approaches are often impractical to implement in sites with sparse and diverse vegetation composition, especially with seasonally variable leaf canopy features. Ground‐based infrared thermometry (TIR) provides spatially and temporally continuous resolution of surface skin temperature that can be directly related to the land surface energy balance. We made repeated measurements with a portable TIR camera to capture seasonal replicates for patch scale heat images for four sagebrush communities. The heat images near peak foliage and near the end of the growing season were compared by computation of surface energy fluxes from TIR sensing to surface energy balance (SEB) and Bowen ratio (BR). Estimates of sensible (H) and latent heat flux (LE) were evaluated with eddy covariance measurements to disaggregate the expression of seasonal phenology of sagebrush species across wetness and elevation. Estimations showed reasonable agreement with ground‐basedLEobservations for most cases (r2 = 0.59–0.76 for SEB and 0.22–0.72 for BR; root mean squared error = 73.4–106.4 W m−2for SEB and 109.9–204.0 W m−2for BR). Predictability declined as the fraction of senescent foliage increased in dry conditions. The field trials suggest the methods have the potential for monitoring land surface energy fluxes and plant health at a very fine spatial scale. The ability to partition heat fluxes from various plant communities over a range of moisture availability will provide valuable information associated with the consumptive water use and phenological processes in the semiarid West.

     
    more » « less