An official website of the United States government
Sulfur dioxide (SO2) pollution has become an increasing issue world-wide as it is produced both naturally and as industrial waste. Thus, it is critical to develop a sensor and detection methods to analyze SO2 in the atmosphere. In order to design and generate an effective sensor that detects low levels of SO2, fuchsine dyes have been used as a potential sensor material. New hydrophobic derivatives of Pararosaniline hydrochloride (pR-HCl) is developed to further improve the sensitivity of fuchsine dyes towards SO2 gas. It has been shown that these dyes can provide an economic and efficient colorimetric detection of SO2. In this work, (pR-HCl) is converted into an ionic material (IM) via a facile ion exchange reaction with bis (trifluoromethane) sulfonamide (NTF2) counterion. The new, hydrophobic derivative, pararosaniline bis (trifluoromethane) sulfonamide (pR-NTF2) IM was converted into stable aqueous ionic nanomaterials (INMs) by a reprecipitation method. Examination of absorption spectra results revealed that pR-NTF2 IM exhibits enhanced molar absorptivity in comparison to the parent dye (pR-HCl). The improved photophysical properties allowed a framework for a highly sensitive nanosensor for detection of SO2. A paper based portable SO2 sensor was also developed and tested for its ability to colorimetric detection of SO2. The cost effective and stable paper-based sensor exhibited the rapid response to decolorize the fuchsine dyes in few seconds as compared to their parent compound.Keywords: SO2 Detection, Portable and Low-cost Sensor, Nanosensor.
more »
« less
A Highly Selective Economical Sensor for 4-Nitrophenol
Herein, an inexpensive commercially available sensor is presented for the detection of 4-nitrophenol (4NP) pollutant. Sodium fluorescein (NaFl) is used as a sensor to detect trace amounts of 4NP in acetonitrile (MeCN). The photophysical properties of NaFl were studied in two different solvents, MeCN (aprotic) and water (protic), with varying concentrations of different nitroaromatics using UV-visible absorption and fluorescence spectrophotometry. In an aqueous medium, photophysical properties of NaFl did not change in the presence of nitroaromatics. However, examination of the photodynamics in MeCN demonstrated that NaFl is extremely sensitive to 4NP (limit of detection: 0.29 µg/mL). This extreme specificity of NaFl towards 4NP when dissolved in MeCN, as compared to other nitroaromatics, is attributed to hydrogen bonding of 4NP with NaFl in the absence of water, resulting in both static and dynamic quenching processes. Thus, NaFl is demonstrated as a simple, inexpensive, sensitive, and robust optical turn off sensor for 4NP.
more »
« less
- Award ID(s):
- 1833004
- PAR ID:
- 10357779
- Date Published:
- Journal Name:
- Sustainable Chemistry
- Volume:
- 2
- Issue:
- 3
- ISSN:
- 2673-4079
- Page Range / eLocation ID:
- 506 to 520
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Human–machine interface requires various sensors for communication, manufacturing and environmental control, and health and safety monitoring. Capacitive sensors have been used to detect touch, distance, geometry, electric property, and environmental parameters. However, highly sensitive proximity detection with a small form factor has always been a challenge. This paper presents a capacitive sensor composed of a nanostructured electrode array for contact and noncontact detection. In the sensor configuration, the nanostructured electrode is made of high aspect ratio cellulose fibers embedded with carbon nanotubes. The complementary electrode is designed to be smaller in surface area for high sensitivity. Based on the analysis, the unique sensing mechanism is shown to enhance the proximity sensitivity for target detection. A pair of asymmetrically designed electrodes are characterized and compared with the traditional symmetric electrodes for proximity and contact detection of human hands. The sensor performance is also characterized for detecting water mass in glass and metal cups. In the end, a smart pad that can recognize human gestures, gait, and water mass with unprecedented sensitivity is demonstrated.more » « less
-
The electronically excited singlet states of nitroaromatic compounds are often presumed to be essentially non-fluorescent. Nonetheless, a growing number of reports in the literature have demonstrated that certain structural types of nitroaromatics can indeed fluoresce, and often quite efficiently. Consideration of the mechanisms responsible for the typical fast or ultrafast non-radiative deactivation of the excited singlet states of nitroaromatics points to several general principles for their design that combine the strong electron-withdrawing properties of the nitro group with reasonable fluorescence quantum yields. An overview of published examples of fluorescent nitroaromatics emphasizes these concepts in the context of the importance of chromophore architecture and conformation and the defining roles of excited state charge transfer and solvent polarity in modulating the non-radiative decay channels that compete with fluorescence. Overcoming the stigma that nitroaromatics are intrinsically destined to be non-fluorescent thus paves the way for incorporating the strongly electron-withdrawing nitro group into the existing toolbox for the development of new nitro-substituted fluorophores and chromophores tuned to specific applications.more » « less
-
Abstract Visible‐light capture activates a thermodynamically inert CoIII−CF3bond for direct C−H trifluoromethylation of arenes and heteroarenes. New trifluoromethylcobalt(III) complexes supported by a redox‐active [OCO] pincer ligand were prepared. Coordinating solvents, such as MeCN, afford green, quasi‐octahedral [(SOCO)CoIII(CF3)(MeCN)2] (2), but in non‐coordinating solvents the complex is red, square pyramidal [(SOCO)CoIII(CF3)(MeCN)] (3). Both are thermally stable, and2is stable in light. But exposure of3to low‐energy light results in facile homolysis of the CoIII−CF3bond, releasing.CF3radical, which is efficiently trapped by TEMPO.or (hetero)arenes. The homolytic aromatic substitution reactions do not require a sacrificial or substrate‐derived oxidant because the CoIIby‐product of CoIII−CF3homolysis produces H2. The photophysical properties of2and3provide a rationale for the disparate light stability.more » « less
-
Abstract Current potentiometric sensing methods are limited to detecting nitrate at parts-per-billion (sub-micromolar) concentrations, and there are no existing potentiometric chemical sensors with ultralow detection limits below the parts-per-trillion (picomolar) level. To address these challenges, we integrate interdigital graphene ion-sensitive field-effect transistors (ISFETs) with a nitrate ion-sensitive membrane (ISM). The work aims to maximize nitrate ion transport through the nitrate ISM, while achieving high device transconductance by evaluating graphene layer thickness, optimizing channel width-to-length ratio (RWL), and enlarging total sensing area. The captured nitrate ions by the nitrate ISM induce surface potential changes that are transduced into electrical signals by graphene, manifested as the Dirac point shifts. The device exhibits Nernst response behavior under ultralow concentrations, achieving a sensitivity of 28 mV/decade and establishing a record low limit of detection of 0.041 ppt (4.8 × 10−13M). Additionally, the sensor showed a wide linear detection range from 0.1 ppt (1.2 × 10−12M) to 100 ppm (1.2 × 10−3M). Furthermore, successful detection of nitrate in tap and snow water was demonstrated with high accuracy, indicating promising applications to drinking water safety and environmental water quality control.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.3390/suschem2030028
