skip to main content


Title: System Architecture for Supporting BIM to Robotic Construction Integration
The adoption of robotics into the construction industry has been much slower than in manufacturing and industrial sectors. Current shortfalls in skilled labor, productivity trends, and ongoing safety challenges point to the need for a drastic shift toward the adoption of robotics as a component of a shift toward industrialized construction. Despite this lag, the interest and development of robotic technology targeting construction has grown in recent years, ranging from the use of drones for tracking to use in offsite fabrication. However, the integration into fundamental site construction requires reconsideration of the information technology infrastructure needed to support detailed task execution information needs in the transition from craft labor to robotic operations. This research presents the identification and mapping of the IT System Architecture required to support BIM to Robotic Construction. Combining elements of the Building Information Modeling architecture and information exchanges with the needed construction task decomposition is required. These elements are mapped to the robotic system elements required for mobile robotic operations. In addition to defining the functions and integration required to support the BIM to Robotic Construction Workflow, shortcomings in existing infrastructure, notably regarding the ability to decompose construction fabrication and assembly means and methods are defined.  more » « less
Award ID(s):
1928626
NSF-PAR ID:
10358889
Author(s) / Creator(s):
; ;
Date Published:
Journal Name:
Proceedings Canadian Society for Civil Engineering
ISSN:
0226-2053
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. The adoption of robotics into the construction industry has been progressing slower than in the manufacturing and industrial sectors. Current shortfalls in skilled labor, productivity trends, and ongoing safety challenges point to the need for a drastic shift toward adopting robotics. Addressing these shortfalls would be a necessary component of the shift toward industrializing the construction industry. Despite this lag in technology adoption, the interest and development of robotic technology targeting the construction industry has grown in recent years and is ranging from the use of drones for tracking to advances in offsite fabrication. However, the integration into fundamental site construction necessitates reconsidering the information technology infrastructure needed to support detailed task execution information needs in the change from craft labor to robotic operations. This research presents the identification and mapping of the Information Technology (IT) system architecture required to support building information modeling (BIM) to robotic construction. Combining elements of BIM architecture and information exchanges with the needed construction task decomposition is required. These elements are mapped to the robotic system elements vital for mobile robotic operations. In addition to defining the functions and integration required to support the BIM to robotic Construction Workflow, shortcomings in existing infrastructure, notably regarding the ability to decompose construction fabrication and assembly means and methods, are defined. 
    more » « less
  2. In the past, the construction industry has been slow to adopt new technology. There has been a rapid expansion of technologies, often referred to as Industry 4.0, to aid in the use of automation. One challenge paralleling these new technologies is implementing how a robot interprets design information, specifically information from a Building Information Model (BIM). This paper presents a method for identifying and transforming information from BIM to support robotic material placement on the construction site. This research will include a review of what information can be directly extracted from the model and what must be supplemented to the model for the robot to perform defined tasks within a construction site. The construction sites’ dynamic nature poses multiple challenges that must be addressed for the information extracted from a model to be used by a robot in daily construction operations. This research also identifies barriers and limitations based upon current practice, such as different levels of development or model content as well as needed precision within the information provided for a mobile robot to complete a defined task. 
    more » « less
  3. Robotic automation of construction tasks is a growing area of research. For robots to successfully operate in a construction environment, sensing technology must be developed which allows for accurate detection of site geometry in a wide range of conditions. Much of the existing body of research on computer vision systems for construction automation focuses on pick-and-place operations such as stacking blocks or placing masonry elements. Very little research has focused on framing and related tasks. The research presented here aims to address this gap by designing and implementing computer vision algorithms for detection and measurement of building framing elements and testing those algorithms using realistic framing structures. These algorithms allow for a stationary RGB-D camera to accurately detect, identify, and measure the geometry of framing elements in a construction environment and match the detected geometry to provided building information modeling (BIM) data. The algorithms reduce identified framing elements to a simplified 3D geometric model, which allows for robust and accurate measurement and comparison with BIM data. This data can then be used to direct operations of construction robotic systems or other machines/equipment. The proposed algorithms were tested in a laboratory setting using an Intel RealSense D455 RGB-D camera, and initial results indicate that the system is capable of measuring the geometry of timber-frame structures with accuracy on the order of a few centimeters. 
    more » « less
  4. Turkan, Y. and (Ed.)
    The construction industry has undergone a technological shift. Technology advancements have made robots a topic of discussion in construction. One challenge to overcome is how the robot receives information from designed BIM models. This study describes the methods employed for parametric modeling and generating model content of wall systems in Autodesk Revit added with a Dynamo script. Coordinates are determined for components based on model geometry and dimensions. Once generated, components are placed with the required material based on wall parameters. This research develops a method to add components based on wall materials from a traditionally modeled BIM extracting information such as location, object identifier (ID), type, and orientation which is formatted to transfer to the robot based on the needs of the robotic system as a list of tasks in a comma-separated values (.CSV) file. This study details the development process and early implementation of the Dynamo script. 
    more » « less
  5. Desjardin, S. and (Ed.)
    The development of robotics in the Architecture, Engineering, and Construction (AEC) industry has emerged in recent years in response to technology advances and industry challenges such as workforce shortages. Construction robotics has the potential to increase construction productivity and accuracy as well as reduce accidents and costs. However, their introduction to construction sites creates new challenges. Previous studies have shown that robots can cause major changes in construction workflow, scope, and methods. Construction robotics introduce key changes to the work process and the sequence of construction tasks. The traditional planning approach for work break down structure and scheduling assigns resources for construction activities based on human labor and craft methods. Despite this, the capabilities of robotics relative to construction resource planning, sequencing, and work scope has not been fully studied. To address this, the implementation of robotics in construction projects needs a new approach to organizing work packages (WP). With the inclusion of robotics as a resource, planning parameters such as methods and sequence will change both the scope and accordingly the work packaging for construction. This paper aims to systematically identify the potential impacts of robots on construction processes, as well as how those changes influences work packaging. The methodology is based on data integration and content analysis from literature review and collected interviews with project participants about real-world construction projects. The paper discusses how construction robots impact the work package approach and categorizes the affected factors. These factors include the work area, sequence and priority of construction activities, safety management, allocation of risk responsibility for tasks, interaction with other trades, and required materials. 
    more » « less