skip to main content


Title: Constraining Remote River Discharge Estimation Using Reach‐Scale Geomorphology
Abstract

Recent advances in remote sensing and the upcoming launch of the joint NASA/CNES/CSA/UKSA Surface Water and Ocean Topography (SWOT) satellite point toward improved river discharge estimates in ungauged basins. Existing discharge methods rely on “prior river knowledge” to infer parameters not directly measured from space. Here, we show that discharge estimation is improved by classifying and parameterizing rivers based on their unique geomorphology and hydraulics. Using over 370,000 in situ hydraulic observations as training data, we test unsupervised learning and an “expert” method to assign these hydraulics and geomorphology to rivers via remote sensing. This intervention, along with updates to model physics, constitutes a new method we term “geoBAM,” an update of the Bayesian At‐many‐stations hydraulic geometry‐Manning's (BAM) algorithm. We tested geoBAM on Landsat imagery over more than 7,500 rivers (108 are gauged) in Canada's Mackenzie River basin and on simulated hydraulic data for 19 rivers that mimic SWOT observations without measurement error. geoBAM yielded considerable improvement over BAM, improving the median Nash‐Sutcliffe efficiency (NSE) for the Mackenzie River from −0.05 to 0.26 and from 0.16 to 0.46 for the SWOT rivers. Further, NSE improved by at least 0.10 in 78/108 gauged Mackenzie rivers and 8/19 SWOT rivers. We attribute geoBAM improvement to parameterizing rivers by type rather than globally, but prediction accuracy worsens if parameters are misassigned. This method is easily mapped to rivers at the global scale and paves the way for improving future discharge estimates, especially when coupled with hydrologic models.

 
more » « less
Award ID(s):
1748653
NSF-PAR ID:
10374562
Author(s) / Creator(s):
 ;  ;  ;  
Publisher / Repository:
DOI PREFIX: 10.1029
Date Published:
Journal Name:
Water Resources Research
Volume:
56
Issue:
11
ISSN:
0043-1397
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Abstract

    Conventional satellite platforms are limited in their ability to monitor rivers at fine spatial and temporal scales: suffering from unavoidable trade‐offs between spatial and temporal resolutions. CubeSat constellations, however, can provide global data at high spatial and temporal resolutions, albeit with reduced spectral information. This study provides a first assessment of using CubeSat data for river discharge estimation in both gauged and ungauged settings. Discharge was estimated for 11 Arctic rivers with sizes ranging from 16 to >1,000 m wide using the Bayesian at‐many‐stations hydraulic geometry‐Manning algorithm (BAM). BAM‐at‐many‐stations hydraulic geometry solves for hydraulic geometry parameters to estimate flow and requires only river widths as input. Widths were retrieved from Landsat 8 and Sentinel‐2 data sets and a CubeSat (the Planet company) data set, as well as their fusions. Results show satellite data fusion improves discharge estimation for both large (>100 m wide) and medium (40–100 m wide) rivers by increasing the number of days with a discharge estimation by a factor of 2–6 without reducing accuracy. Narrow rivers (<40 m wide) are too small for Landsat and Sentinel‐2 data sets, and their discharge is also not well estimated using CubeSat data alone, likely because the four‐band sensor cannot resolve water surfaces accurately enough. BAM technique outperforms space‐based rating curves when gauge data are available, and its accuracy is acceptable when no gauge data are present (instead relying on global reanalysis for discharge priors). Ultimately, we conclude that the data fusion presented here is a viable approach toward improving discharge estimates in the Arctic, even in ungauged basins.

     
    more » « less
  2. Abstract

    Daily floods including event, characteristic, extreme and inundation in the Lancang‐Mekong River Basin (LMRB), crucial for flood projection and forecasting, have not been adequately modeled. An improved hydrological‐hydrodynamic model (VIC and CaMa‐Flood) considering regional parameterization was developed to simulate the flood dynamics over the basin from 1967 to 2015. The flood elements were extracted from daily time series and evaluated at both local and regional scales using the data collected from in‐situ observations and remote sensing. The results show that the daily discharge and water level are both well simulated at selected stations with relative error (RE) less than 10% and Nash‐Sutcliffe efficiency coefficient (NSE) over 0.90. Half of the flood events haveNSEexceeding 0.76. The peak time and flood volume are well reproduced while both peak discharge and water level are slightly underestimated. The results tend to worsen when the characteristics of flood events are extended to annual extremes. These extremes are generally underestimated withNSEless than 0.5 butREis within 20%. The simulated rainy season inundation area generally agrees with observations from remote sensing, with about 86.8% inundation occurrence frequency captured within the model capacity. Ignoring the regional parameterization and reservoir regulation can both deteriorate flood simulation performance at the local scale, resulting in lowerNSE. Specifically, systematically higher water levels and up to 27% overestimation of peak discharge are found when ignoring regional parameterization, while ignoring reservoir regulation would cause up to 23% overestimation for flood extremes. It is expected that these findings would contribute to the regional flood forecasting and flood management.

     
    more » « less
  3. Abstract

    Because of the high logistical and financial costs of direct measurements of riverine suspended sediment, remote sensing is increasingly used to supplement the direct‐observation record. The accuracy of this method is poorly constrained, and its potential as a tool for understanding river sediment transport is thus limited. We introduce and apply global‐scale methods for estimating depth‐integrated suspended‐sediment concentrations (SSCs) using Landsat 5 and 7 satellite imagery calibrated with 134,697 in situ SSC measurements. We account for river‐to‐river variability in the relationship between water optical properties and SSC by (a) categorizing rivers using unsupervised K‐means clustering and/or (b) correcting calibration estimates for individual rivers using local in situ measurements of SSC, suspended‐sediment grain size, and percent organic carbon (POC). In the absence of site‐specific in situ SSC measurements, clustering rivers reduces the average relative error of SSC estimates from 97% to 73%. We show that as few as five site‐specific in situ measurements combined with our algorithm further reduces average relative error to 49% and average relative at‐a‐station bias in SSC to 7%. Little additional improvement in accuracy or bias is gained by including measurements of percent sand or POC of the suspended sediment. Since only modest additional accuracy is gained after ~5–10 paired in situ SSC measurements and satellite observations, sampling campaigns should prioritize limited sampling at diverse locations rather than intensive sampling at a limited number of sites. In addition, we publish standalone calibrations for 151 rivers made solely with in situ SSC measurements local to those sites.

     
    more » « less
  4. Abstract

    Coastal wetlands are nourished by rivers and periodical tidal flows through complex, interconnected channels. However, in hydrodynamic models, channel dimensions with respect to model grid size and uncertainties in topography preclude the correct propagation of tidal and riverine signals. It is therefore crucial to enhance channel geomorphic connectivity and simplify sub‐channel features based on remotely sensed networks for practical computational applications. Here, we utilize channel networks derived from diverse remote sensing imagery as a baseline to build a ∼10 m resolution hydrodynamic model that covers the Wax Lake Delta and adjacent wetlands (∼360 km2) in coastal Louisiana, USA. In this richly gauged system, intensive calibrations are conducted with 18 synchronous field‐observations of water levels taken in 2016, and discharge data taken in 2021. We modify channel geometry, targeting realism in channel connectivity. The results show that a minimum channel depth of 2 m and a width of four grid elements (approximatively 40 m) are required to enable a realistic tidal propagation in wetland channels. The optimal depth for tidal propagation can be determined by a simplified cost function method that evaluates the competition between flow travel time and alteration of the volume of the channels. The integration of high spatial‐resolution models and remote sensing imagery provides a general framework to improve models performance in salt marshes, mangroves, deltaic wetlands, and tidal flats.

     
    more » « less
  5. Abstract

    At‐many‐stations hydraulic geometry (AMHG), while useful for estimating river discharge from satellite data, remains empirical and has yet to be reconciled with the at‐a‐station hydraulic geometry (AHG) from which it was originally derived. Here we present evidence, using United States Geological Survey field measurements of channel hydraulics for 155 rivers, that AMHG can be hydraulically and geomorphically reconciled with AHG. Our results indicate that AMHG is rightly understood as an expression of a river‐wide model of hydraulics driven by changes in slope imposed upon AHG physics. The explanatory power of AHG and this river‐wide model combine to determine whether AMHG exists: if both AHG and the river‐wide model adequately describe hydraulics, then we show that AMHG is a necessary mathematical consequence of these two phenomena. We also orient these findings in the context of river discharge estimation and other applications.

     
    more » « less