skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Attention:

The NSF Public Access Repository (PAR) system and access will be unavailable from 11:00 PM ET on Friday, May 16 until 2:00 AM ET on Saturday, May 17 due to maintenance. We apologize for the inconvenience.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


  • NSF Public Access
  • Search Results
  • Enhanced Mechanical Properties of Uniaxially Stretched Polylactide/Poly(ethylene oxide)-b-Poly(butylene oxide) Blend Films
Title: Enhanced Mechanical Properties of Uniaxially Stretched Polylactide/Poly(ethylene oxide)-b-Poly(butylene oxide) Blend Films
Chain orientation, a natural consequence of polymer film processing, often leads to enhanced mechanical properties parallel to the machine extrusion direction (MD), while leaving the properties in the transverse direction (TD) unaffected or diminished, as compared to the unoriented material. Here, we report that mixing poly(ethylene oxide)-block-poly(butylene oxide) (PEO-PBO) diblock copolymer that forms dispersed particles in an amorphous polylactide (PLA) matrix produces uniaxially stretched blend films with enhanced toughness in both the MD and TD. Small-angle X-ray scattering experiments and visual observations revealed that the dominant deformation mechanism for blend films transitions from crazing to shear yielding in the MD as the stretching ratio increases, while crazing is the primary deformation mechanism in the TD at all stretching ratios investigated. As the films age at room temperature, crazing becomes more prevalent in the MD without compromising the improved toughness. The stretched blend films were susceptible to some degree of mechanical aging in the TD but remained fivefold tougher than stretched neat PLA films for up to 150 days. This work presents a feasible route to produce uniaxially stretched PEO–PBO/PLA films that are mechanically tough, which provides a more sustainable plastic alternative.  more » « less
Award ID(s):
1901635 2011401
PAR ID:
10379174
Author(s) / Creator(s):
; ; ; ; ; ;
Date Published:
Journal Name:
ACS Applied Polymer Materials
ISSN:
2637-6105
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; (, ACS Applied Polymer Materials)
    Semicrystalline poly(l-lactide) (PLLA) is a leading biosourced, compostable alternative to conventional plastics but lacks sufficient toughness for many applications. Chain alignment via uniaxial stretching may be used to toughen PLLA but often creates anisotropic materials that are tough in the machine direction (MD) but brittle in the transverse direction (TD). This work reports uniaxially stretched films of PLLA blended with 3 wt % poly(ethylene oxide)-block-poly(butylene oxide) (PEO-PBO), which exhibit as much as a 5-fold increase in toughness in the TD compared to similarly stretched neat PLLA films─and elucidates the impact of PEO–PBO particles on the relationship between stretching, crystallization behavior, and resultant mechanical properties. Faster stretching rates were correlated with higher yield stress and a greater degree of crystallite alignment in the PEO–PBO/PLLA blends. This trend highlights the synergistic relationship between crystallinity and chain alignment and suggests a competing mechanism of heterogeneous crystallite nucleation around PEO–PBO particles. Importantly, PEO–PBO/PLLA exhibited a TD elongation at break of 36%, five times greater than the value of similarly stretched neat PLLA and even greater than the corresponding MD value of either material. Taken together, these findings demonstrate that uniaxial stretching of PEO–PBO/PLLA blends produces biaxially tough films, with the fastest stretching conditions producing the greatest enhancement in TD toughness. 
    more » « less
  2. ; ; ; ; ; (, Macromolecular Rapid Communications)
    Abstract The processing–structure–property relationship using poly(lactic acid) (PLA) and poly(ethylene terephthalate) (PET) is explored. Specifically, both pre‐extension and preshear of amorphous PLA and PET above their glass transition temperaturesTg, carried out in the affine deformation limit, can induce a specific type of cold crystallization during annealing, i.e., nanoconfined crystallization (NCC) where crystal sizes are limited to a nanoscopic scale in all dimensions so as to render the processed PLA and PET optically transparent. The new polymer structure after premelt deformation can show considerably enhanced mechanical properties. For example, premelt stretching produces geometric condensation of the chain network. This structural alternation can profoundly change the mechanical characteristics, e.g., turning brittle PLA ductile. In contrast, after preshear of amorphous PLA aboveTg, the NCC containing PLA remains brittle, showing the importance to have geometric condensation from processing. Both AFM imaging and SAXS measurements are performed to verify that premelt deformation of PLA and PET indeed results in NCC from annealing that permits the strain‐induced cold crystallization to take place on the length scale of the mesh size of the deformed chain network. 
    more » « less
  3. ; ; ; ; ; ; ; (, Journal of Applied Polymer Science)
    ABSTRACT This study investigates the morphological, thermal, mechanical, and bioactive properties of centrifugally spun fibrous composites made from poly(D,L‐lactide)/poly(3‐hydroxybutyrate) (PLA/PHB) blends with zinc oxide (ZnO) and hydroxyapatite (Hap) nanoparticles. A 75/25 PLA/PHB weight ratio was chosen to balance mechanical and thermal properties. The precursor solution viscosities ranged from 0.25 to 0.50 Pa s, increasing with nanoparticle incorporation probably due to polymer‐nanoparticle interactions. SEM revealed a uniform fibrous morphology, with diameters of 1.21 for PLA/PHB, 2.65 for PLA/ZnO/Hap, and 1.80 μm for PLA/PHB/ZnO/Hap. TGA showed two‐step degradation for PLA/PHB fibers, while PLA/PHB/ZnO/Hap degraded in a single step at 249°C, leaving a residue of 9.95%. DSC indicated partial miscibility, with cold crystallization at 85°C (enthalpy: 7.72 J/g), slightly modified by nanoparticle addition. PLA/PHB fibers achieved a Young's modulus of 24.96 ± 3.91 MPa, three times that of pure PLA, but adding ZnO and Hap reduced modulus and tensile strength to 6.03 and 0.29 MPa, retaining suitability for biomedical applications. PLA/PHB/ZnO/Hap fibers exhibited 90%Escherichia coligrowth inhibition and enhanced MC3T3‐E1 cell viability by 120% on day 7. These results highlight their potential for antimicrobial, biocompatible medical devices. 
    more » « less
  4. ; ; ; ; ; (, Applied Spectroscopy)
    Crystallization from the melt is a critical process governing the properties of semi-crystalline polymeric materials. While structural analyses of melting and crystallization transitions in bulk polymers have been widely reported, in contrast, those in thin polymer films on solid supports have been underexplored. Herein, in situ Raman microscopy and self-modeling curve resolution (SMCR) analysis are applied to investigate the temperature-dependent structural changes in poly(ethylene oxide) (PEO) films during melting and crystallization phase transitions. By resolving complex overlapping sets of spectra, SMCR analysis reveals that the thermal transitions of 50 µm thick PEO films comprise two structural phases: an ordered crystalline phase and a disordered amorphous phase. The ordered structure of the crystalline PEO film entirely disappears as the polymer is heated; conversely, the disordered structure of the amorphous PEO film reverts to the ordered structure as the polymer is cooled. Broadening of the Raman bands was observed in PEO films above the melting temperature (67 °C), while sharpening of bands was observed below the crystallization temperature (45 °C). The temperatures at which these spectral changes occurred were in good agreement with differential scanning calorimetry (DSC) measurements, especially during the melting transition. The results illustrate that in situ Raman microscopy coupled with SMCR analysis is a powerful approach for unraveling complex structural changes in thin polymer films during melting and crystallization processes. Furthermore, we show that confocal Raman microscopy opens opportunities to apply the methodology to interrogate the structural features of PEO or other surface-supported polymer films as thin as 2 µm, a thickness regime beyond the reach of conventional thermal analysis techniques. 
    more » « less
  5. ; ; ; (, Science Advances)
    Through a combined approach of experiment and simulation, this study quantifies the role of entanglements in determining the mechanical properties of glassy polymer blends. Uniaxial extension experiments on 100-nm films containing a bidisperse mixture of polystyrene enable quantitative comparison with molecular dynamics (MD) simulations of a coarse-grained model for polymer glasses, where the bidisperse blends allow us to systematically tune the entanglement density of both systems. In the MD simulations, we demonstrate that not all entanglements carry substantial load at large deformation, and our analysis allows the development of a model to describe the number of effective, load-bearing entanglements per chain as a function of blend ratio. The film strength measured experimentally and the simulated film toughness are quantitatively described by a model that only accounts for load-bearing entanglements. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email