An official website of the United States government
Abstract The energetic chemical reaction between Zn(NO3)2and Li is used to create a solid‐state interface between Li metal and Li6.4La3Zr1.4Ta0.6O12(LLZTO) electrolyte. This interlayer, composed of Zn, ZnLixalloy, Li3N, Li2O, and other species, possesses strong affinities with both Li metal and LLZTO and affords highly efficient conductive pathways for Li+transport through the interface. The unique structure and properties of the interlayer lead to Li metal anodes with longer cycle life, higher efficiency, and better safety compared to the current best Li metal electrodes operating in liquid electrolytes while retaining comparable capacity, rate, and overpotential. All‐solid‐state Li||Li cells can operate at very demanding current–capacity conditions of 4 mA cm−2–8 mAh cm−2. Thousands of hours of continuous cycling are achieved at Coulombic efficiency >99.5 % without dendrite formation or side reactions with the electrolyte.
more »
« less
Gaseous Nitrogen Oxides Catholyte for Rechargeable Redox Flow Batteries
Abstract There is a strong interest in finding highly soluble redox compounds to improve the energy density of redox flow batteries (RFBs). However, the performance of electrolytes is often negatively influenced by high solute concentration. Herein, we designed a high‐potential (0.5 V vs. Ag/Ag+) catholyte for RFBs, where the charged and discharged species are both gaseous nitrogen oxides (NOx). These species can be liberated from the liquid electrolyte and stored in a separate gas container, allowing scale‐up of storage capacity without increasing the concentration and volume of the electrolyte. The oxidation of NO in the presence of NO3−affords N2O3, and the reduction of N2O3regenerates NO and NO3−, together affording the electrochemical reaction: NO3−+3 NO⇌2 N2O3+e−with a low mass/charge ratio of 152 grams per mole of stored electron. A proof‐of‐concept NOxsymmetric H‐cell shows 200 stable cycles over 400 hours with >97 % Coulombic efficiency and negligible capacity decay.
more »
« less
- Award ID(s):
- 2124604
- PAR ID:
- 10397462
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Angewandte Chemie International Edition
- Volume:
- 62
- Issue:
- 9
- ISSN:
- 1433-7851
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract The utilization of redox‐active gas as cathode materials has been proposed as a promising approach to meet the demand for next‐generation battery technologies. Toward this end, nitrogen oxides (NOx)—inexpensive, abundant gases readily produced from ammonia on an industrial scale—is a promising energy storage media; however, its utilization as cathode material has not been achieved. In this work, the cage effect of NO and NO2radicals are utilized to stabilize the charge product of Li‐NOxcell as N2O3. This cell operates via reversible redox of LiNO3to N2O3, achieving a specific capacity of 1,570 mA h gcarbon−1or 25 mA h cmelectrode−2 at a full cell voltage of 3.85 V with an average energy efficiency of 89% at a current density up to 2 mA cmelectrode−2. These metrics represent one of the highest areal capacity, current density, cell voltage, and energy efficiency reported for a metal‐gas cells.more » « less
-
Abstract Iron ion batteries using Fe2+as a charge carrier have yet to be widely explored, and they lack high‐performing Fe2+hosting cathode materials to couple with the iron metal anode. Here, it is demonstrated that VOPO4∙2H2O can reversibly host Fe2+with a high specific capacity of 100 mAh g−1and stable cycling performance, where 68% of the initial capacity is retained over 800 cycles. In sharp contrast, VOPO4∙2H2O's capacity of hosting Zn2+fades precipitously over tens of cycles. VOPO4∙2H2O stores Fe2+with a unique mechanism, where upon contacting the electrolyte by the VOPO4∙2H2O electrode, Fe2+ions from the electrolyte get oxidized to Fe3+ions that are inserted and trapped in the VOPO4∙2H2O structure in an electroless redox reaction. The trapped Fe3+ions, thus, bolt the layered structure of VOPO4∙2H2O, which prevents it from dissolution into the electrolyte during (de)insertion of Fe2+. The findings offer a new strategy to use a redox‐active ion charge carrier to stabilize the layered electrode materials.more » « less
-
Abstract A new concentrated ternary salt ether‐based electrolyte enables stable cycling of lithium metal battery (LMB) cells with high‐mass‐loading (13.8 mg cm−2, 2.5 mAh cm−2) NMC622 (LiNi0.6Co0.2Mn0.2O2) cathodes and 50 μm Li anodes. Termed “CETHER‐3,” this electrolyte is based on LiTFSI, LiDFOB, and LiBF4with 5 vol% fluorinated ethylene carbonate in 1,2‐dimethoxyethane. Commercial carbonate and state‐of‐the‐art binary salt ether electrolytes were also tested as baselines. With CETHER‐3, the electrochemical performance of the full‐cell battery is among the most favorably reported in terms of high‐voltage cycling stability. For example, LiNixMnyCo1–x–yO2(NMC)‐Li metal cells retain 80% capacity at 430 cycles with a 4.4 V cut‐off and 83% capacity at 100 cycles with a 4.5 V cut‐off (charge at C/5, discharge at C/2). According to simulation by density functional theory and molecular dynamics, this favorable performance is an outcome of enhanced coordination between Li+and the solvent/salt molecules. Combining advanced microscopy (high‐resolution transmission electron microscopy, scanning electron microscopy) and surface science (X‐ray photoelectron spectroscopy, time‐of‐fight secondary ion mass spectroscopy, Fourier‐transform infrared spectroscopy, Raman spectroscopy), it is demonstrated that a thinner and more stable cathode electrolyte interphase (CEI) and solid electrolyte interphase (SEI) are formed. The CEI is rich in lithium sulfide (Li2SO3), while the SEI is rich in Li3N and LiF. During cycling, the CEI/SEI suppresses both the deleterious transformation of the cathode R‐3m layered near‐surface structure into disordered rock salt and the growth of lithium metal dendrites.more » « less
-
Abstract Li2MnO3has been contemplated as a high‐capacity cathode candidate for Li‐ion batteries; however, it evolves oxygen during battery charging under ambient conditions, which hinders a reversible reaction. However, it is unclear if this irreversible process still holds under subambient conditions. Here, the low‐temperature electrochemical properties of Li2MnO3in an aqueous LiCl electrolyte are evaluated and a reversible discharge capacity of 302 mAh g−1at a potential of 1.0 V versus Ag/AgCl at −78 °C with good rate capability and stable cycling performance, in sharp contrast to the findings in a typical Li2MnO3cell cycled at room temperature, is observed. However, the results reveal that the capacity does not originate from the reversible oxygen oxidation in Li2MnO3but the reversible Cl2(l)/Cl−(aq.) redox from the electrolyte. The results demonstrate the good catalytic properties of Li2MnO3to promote the Cl2/Cl−redox at low temperatures.more » « less
