skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


  • NSF Public Access
  • Search Results
  • A Wireless Underground Sensor Network Field Pilot for Agriculture and Ecology: Soil Moisture Mapping Using Signal Attenuation
Title: A Wireless Underground Sensor Network Field Pilot for Agriculture and Ecology: Soil Moisture Mapping Using Signal Attenuation
Wireless Underground Sensor Networks (WUSNs) that collect geospatial in situ sensor data are a backbone of internet-of-things (IoT) applications for agriculture and terrestrial ecology. In this paper, we first show how WUSNs can operate reliably under field conditions year-round and at the same time be used for determining and mapping soil conditions from the buried sensor nodes. We demonstrate the design and deployment of a 23-node WUSN installed at an agricultural field site that covers an area with a 530 m radius. The WUSN has continuously operated since September 2019, enabling real-time monitoring of soil volumetric water content (VWC), soil temperature (ST), and soil electrical conductivity. Secondly, we present data collected over a nine-month period across three seasons. We evaluate the performance of a deep learning algorithm in predicting soil VWC using various combinations of the received signal strength (RSSI) from each buried wireless node, above-ground pathloss, the distance between wireless node and receive antenna (D), ST, air temperature (AT), relative humidity (RH), and precipitation as input parameters to the model. The AT, RH, and precipitation were obtained from a nearby weather station. We find that a model with RSSI, D, AT, ST, and RH as inputs was able to predict soil VWC with an R2 of 0.82 for test datasets, with a Root Mean Square Error of ±0.012 (m3/m3). Hence, a combination of deep learning and other easily available soil and climatic parameters can be a viable candidate for replacing expensive soil VWC sensors in WUSNs.  more » « less
Award ID(s):
2034415
PAR ID:
10398497
Author(s) / Creator(s):
; ; ; ; ;
Date Published:
Journal Name:
Sensors
Volume:
22
Issue:
10
ISSN:
1424-8220
Page Range / eLocation ID:
3913
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; (, Fire)
    null (Ed.)
    There is an increased risk of future fire disturbances due to climate change and anthropogenic activity. These disturbances can impact soil moisture content and infiltration, which are important antecedent conditions for predicting rainfall–runoff processes in semi-arid regions. Yet these conditions are not well documented. This case study provides critical field measurements and information, which are needed to improve our understanding of mechanisms such as precipitation and temperature that lead to the variability of soil properties and processes in urban and burned landscapes. In June 2018, a fire burned a portion of the riparian zone in Alvarado Creek, an urban tributary of the San Diego River in California, United States. This fire provided an opportunity to observe soil moisture content and infiltration for one year after the fire. Three transects (one burned and two unburned) were monitored periodically to evaluate the complex spatial and temporal dynamics of soil moisture and infiltration patterns. Average dry season soil moisture content was less than five percent volume water content (%VWC) for all transects, and the burned transect exhibited the lowest %VWC during the wet season. Infiltration rates displayed a high degree of spatial and temporal variability. However, the location with the highest burn severity had the lowest average infiltration rate. The observed differences between the burned and unburned transects indicate that the fire altered hydrologic processes of the landscape and reduced the ability of the soil to retain water during the wet season. This research provides the first high-resolution soil moisture and infiltration field analysis of an urban fire-disturbed stream in southern California and a method to characterize post-fire hydrologic conditions for rainfall–runoff processes. 
    more » « less
  2. ; (, Environmental Data Initiative)
    Soil temperature and soil moisture have been measured at multiple locations in and around Baltimore Maryland to provide data on these variables in forests and lawns across an urban to rural gradient. In July 2011, we installed one Decagon Em50 Datalogger with five 5TM VWC/Temperature probes at four established forested, upslope, 20 x 20-m plots, two rural (ORU1, ORU2) and two urban (LEA1, LEA2), at 2 forested riparian sites at two transects along a stream (ORUR, ORLR), and two lawn plots on the campus of the University of Maryland Baltimore County campus (UMBC1, UMBC 2). Probes were buried horizontally at 10cm depth (except UMBC1 and UMBC2 where the five probes are mounted horizontally at a single location at depths of 50, 40, 30, 20 and 10 cm depth). At the upslope forested plots, the five probes are replicates. At the two riparian sites, probes are deployed in either "hummocks (drier, higher)" or in "hollows (lower, wetter)". Soil temperature and soil moisture were measured at hourly intervals on these plots beginning in July 2011. Earlier soil moisture data were collected monthly (1999-2011), and can be found in https://portal.edirepository.org/nis/mapbrowse?scope=knb-lter-bes&identifier=417 
    more » « less
  3. ; (, Environmental Data Initiative)
    Soil temperature and soil moisture have been measured at multiple locations in and around Baltimore Maryland to provide data on these variables in forests and lawns across an urban to rural gradient. In July 2011, we installed one Decagon Em50 Datalogger with five 5TM VWC/Temperature probes at four established forested, upslope, 20 x 20-m plots, two rural (ORU1, ORU2) and two urban (LEA1, LEA2), at 2 forested riparian sites at two transects along a stream (ORUR, ORLR), and two lawn plots on the campus of the University of Maryland Baltimore County campus (UMBC1, UMBC 2). Probes were buried horizontally at 10cm depth (except UMBC1 and UMBC2 where the five probes are mounted horizontally at a single location at depths of 50, 40, 30, 20 and 10 cm depth). At the upslope forested plots, the five probes are replicates. At the two riparian sites, probes are deployed in either "hummocks (drier, higher)" or in "hollows (lower, wetter)". Soil temperature and soil moisture were measured at hourly intervals on these plots beginning in July 2011. Earlier soil moisture data were collected monthly (1999-2011), and can be found in https://portal.edirepository.org/nis/mapbrowse?scope=knb-lter-bes&identifier=417 
    more » « less
  4. ; ; (, Water Resources Research)
    Abstract Surface topography can influence flow pathways and the location of runoff source areas and water transport in steep headwater catchments. However, the influence of topography on spatial patterns of residual soil moisture is less well understood. We measured soil volumetric water content (VWC) on 14 dates at 0–30 and 30–60 cm depth at 54 sites on a steep, 10 ha north‐facing forested slope in the west‐central Cascades Mountains of Oregon, USA. Spatial patterns in VWC were persistent over time, and contrary to expectations VWC at 30–60 cm depth was greater on divergent than convergent slopes, especially during wet periods (R2 = 0.27,p < 0.001). Vegetation characteristics were assessed for all VWC monitoring locations and soil properties were determined for 13 locations as local factors that affect spatial patterns in VWC. Mean VWC over all dates was negatively correlated to gravimetric rock content (R2 = 0.28,p = 0.03) and positively correlated to water storage at field capacity (R2 = 0.56,p < 0.01). The variability in rock content in quick‐draining soils influenced soil‐water retention, and by extension, created spatially heterogenous but temporally persistent patterns in VWC. While spatial patterns were persistent, they were not easily explained by surficial topography in a steep, mountainous landscape with rocky, well‐drained soils. Further research is needed to understand if combined soil‐terrain metrics would be a more useful proxy for VWC than terrain‐based wetness metrics alone. 
    more » « less
  5. ; ; ; ; (, 2020 IEEE International Conference on Big Data (Big Data))
    The integration of wireless power technology in large sensor networks is highly sought for in many applications, including agriculture. This is due to the accessibility and lack of wiring complexity such technologies have to offer. In an agricultural setting, the working environment can be harsh on sensing equipment due to factors that include weather, constant deconstruction and re-installation with the changing plant cycles, and vehicle traffic. Since many agriculture plots reside in difficult to access locations, the use of self-sufficient energy capturing methods have become popular. These contemporary methods generally rely on the collection of solar, wind, or ambient radio waves to charge battery banks connected to the sensing device. These methods have major limitations as sunlight can be shadowed as crops mature, wind creates obstacles for equipment to navigate, and radio frequencies do not penetrate well through soil or plants. This ultimately reduces the quantity of sensors that can be instrumented throughout a field. To address such limitations, a new wireless power transfer method will be presented that utilizes a buried transmitter to generate conduction currents through the soil to power distant sensing devices scattered throughout a field. Impedance spectra of the soil is used to determine the optimal depth of the transmitter. The power capabilities of the system are demonstrated by operating, without a battery, a moisture sensor connected to a microcontroller at a 10 m distance from the transmitter. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email