An official website of the United States government
Abstract Fe‐N‐C single‐atom catalysts (SACs) are emerging as a promising class of electrocatalysts for the oxygen reduction reaction (ORR) to replace Pt‐based catalysts. However, due to the limited loading of Fe for SACs and the inaccessibility of internal active sites, only a small portion of the sites near the external surface are able to contribute to the ORR activity. Here, this work reports a metal–organic framework‐derived Fe‐N‐C SAC with a hierarchically porous and concave nanoarchitecture prepared through a facile but effective strategy, which exhibits superior electrocatalytic ORR activity with a half‐wave potential of 0.926 V (vs RHE) in alkaline media and 0.8 V (vs RHE) in acidic media while maintaining excellent stability. The superior ORR activity of the as‐designed catalyst stems from the unique architecture, where the hierarchically porous architecture contains micropores as Fe SAC anchoring sites, meso‐/macro‐pores as accessible channels, and concave shell for increasing external surface area. The unique architecture has dramatically enhanced the utilization of previously blocked internal active sites, as confirmed by a high turnover frequency of 3.37 s−1and operando X‐ray absorption spectroscopy analysis with a distinct shift of adsorption edge.
more »
« less
Effect of Phosphorus Modulation in Iron Single‐Atom Catalysts for Peroxidase Mimicking
Abstract Fe–N–C single‐atom catalysts (SACs) exhibit excellent peroxidase (POD)‐like catalytic activity, owing to their well‐defined isolated iron active sites on the carbon substrate, which effectively mimic the structure of natural peroxidase's active center. To further meet the requirements of diverse biosensing applications, SAC POD‐like activity still needs to be continuously enhanced. Herein, a phosphorus (P) heteroatom is introduced to boost the POD‐like activity of Fe–N–C SACs. A 1D carbon nanowire (FeNCP/NW) catalyst with enriched Fe–N4active sites is designed and synthesized, and P atoms are doped in the carbon matrix to affect the Fe center through long‐range interaction. The experimental results show that the P‐doping process can boost the POD‐like activity more than the non‐P‐doped one, with excellent selectivity and stability. The mechanism analysis results show that the introduction of P into SAC can greatly enhance POD‐like activity initially, but its effect becomes insignificant with increasing amount of P. As a proof of concept, FeNCP/NW is employed in an enzyme cascade platform for highly sensitive colorimetric detection of the neurotransmitter acetylcholine.
more »
« less
- PAR ID:
- 10401429
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Advanced Materials
- Volume:
- 36
- Issue:
- 10
- ISSN:
- 0935-9648
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Electrochemical reduction reaction of CO2(CO2RR) is a promising technology for alleviating the global warming caused by the emission of CO2. This technology, however, is still in the stage of finding efficient catalysts. The catalysts must be able to convert CO2to other carbon‐based products with high activity and selectivity to valuable chemicals. In this review, previous development of heteroatom‐doped metal‐free carbon materials (H‐CMs) is briefly summarized. Recent progress of CO2RR promoted by metal single‐atom catalysts (M‐SACs) is then discussed with emphasis on the synthesis of M‐SACs, the catalytic performance, and reaction mechanisms. The high temperature pyrolysis method and electrodeposition are attracting attentions recently to prepare M‐SACs with high metal loading on N‐doped carbon materials, a very active M‐SACs system for the CO2RR. Theoretical calculations of free energy change on active sites, the Operando X‐ray absorption near edge structure (XANES), and Bader charge analysis reveal a significant role of metal oxidation state and charge transfer between metal atoms and absorbed CO. The challenges and perspectives for the extensive applications of M‐SACs in CO2RR are also discussed in this review.more » « less
-
Enhanced Solar CO2 Reduction Using Single Cobalt Sites on Carbon Nitride Modified with a DianhydridePhotoactive single-atom catalysts (SACs) are among the most exciting catalytic materials for solar fuel production. Different SACs, including our own Co SACs, have been prepared on graphitic carbon nitride (C3N4) for use in photocatalysis. Building on our prior success, we report here doped C3N4 using various supplemental carbon dopants as the support for Co SACs. The Co SAC on a dianhydride doped C3N4 showed the highest activity in photocatalytic CO2 reduction. Catalyst characterization was carried out to explore the origin of the enhanced activity of this particular Co SAC. The dianhydride doped C3N4 possesses unique microstructural features, including large inter-layer space and fibrous morphology, that could contribute to the enhanced photocatalytic activity. Our results further indicate that the dianhydride is the most effective dopant to incorporate aromatic moieties in C3N4, which resulted in improved charge separation and enhanced activity in photocatalysis.more » « less
-
Iron and nitrogen-doped double gyroid mesoporous carbons for oxygen reduction in acidic environmentsAbstract Iron- and nitrogen-doped carbon (Fe-N-C) represents a promising class of alternative electrocatalysts to noble metals for the oxygen reduction reaction (ORR) in acidic environments. To make Fe-N-C active, one of the most critical parameters is microporosity, which must be controlled to maximize the active site density. However, the use of microporosity must be optimized for the requirement of high-flux mass transport. Here, we synthesized and demonstrated gyroidal mesoporous Fe-N-C with microporous pore walls as an avenue to combine a high active-site density with favorable mass transport at high flux. The gyroidal mesoporous Fe-N-C catalysts have competitive gravimetric and volumetric ORR activities, comparable to the ORR activity obtained in purely microporous configurations despite having mesoporous features. Our result suggests that the ORR activity of microporous Fe-N-C electrocatalysts can be combined with mesoporosity through the use of mesoporous Fe-N-C with microporous pore walls. We further investigate effects of the nitrogen incorporation method on mesoporous N-doped carbon electrocatalysts. We find that despite having ∼2 × higher N concentration, nitrogen incorporationviaNH3yields similar ORR activity to incorporationviaa chemical additive, a finding we attribute to the role of pyridinic and quaternary N in the ORR.more » « less
-
Abstract FeN4moieties embedded in partially graphitized carbon are the most efficient platinum group metal free active sites for the oxygen reduction reaction in acidic proton‐exchange membrane fuel cells. However, their formation mechanisms have remained elusive for decades because the Fe−N bond formation process always convolutes with uncontrolled carbonization and nitrogen doping during high‐temperature treatment. Here, we elucidate the FeN4site formation mechanisms through hosting Fe ions into a nitrogen‐doped carbon followed by a controlled thermal activation. Among the studied hosts, the ZIF‐8‐derived nitrogen‐doped carbon is an ideal model with well‐defined nitrogen doping and porosity. This approach is able to deconvolute Fe−N bond formation from complex carbonization and nitrogen doping, which correlates Fe−N bond properties with the activity and stability of FeN4sites as a function of the thermal activation temperature.more » « less
