Advanced templating techniques have enabled delicate control of both nano‐ and microscale structures and have helped thrust functional materials into the forefront of society. Cellulose nanomaterials are derived from natural polymers and show promise as a templating source for advanced materials. Use of cellulose nanomaterials in templating combines nanoscale property control with sustainability, an attribute often lacking in other templating techniques. Use of cellulose nanofibers for templating has shown great promise in recent years, but previous reviews on cellulose nanomaterial templating techniques have not provided extensive analysis of cellulose nanofiber templating. Cellulose nanofibers display several unique properties, including mechanical strength, porosity, high water retention, high surface functionality, and an entangled fibrous network, all of which can dictate distinctive aspects in the final templated materials. Many applications exploit the unique aspects of templating with cellulose nanofibers that help control the final properties of the material, including, but not limited to, applications in catalysis, batteries, supercapacitors, electrodes, building materials, biomaterials, and membranes. A detailed analysis on the use of cellulose nanofibers templating is provided, addressing specifically how careful selection of templating mechanisms and methodologies, combined toward goal applications, can be used to directly benefit chosen applications in advanced functional materials.
- Award ID(s):
- NSF-PAR ID:
- Date Published:
- Journal Name:
- Polymer Reviews
- Page Range / eLocation ID:
- 1 to 36
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
In an effort to develop and design next generation high power target materials for particle physics research, the possibility of fabricating nonwoven metallic or ceramic nanofibers by electrospinning process is explored. A low-cost electrospinning unit is set up for in-house production of various ceramic nanofibers. Yttria-stabilized zirconia nanofibers are successfully fabricated by electrospinning a mixture of zirconium carbonate with high-molecular weight polyvinylpyrrolidone polymer solution. Some of the inherent weaknesses of electrospinning process like thickness of nanofiber mat and slow production rate are overcome by modifying certain parts of electrospinning system and their arrangements to get thicker nanofiber mats of millimeter order at a faster rate. Continuous long nanofibers of about hundred nanometers in diameter are produced and subsequently heat treated to get rid of polymer and allow crystallize zirconia. Specimens were prepared to meet certain minimum physical properties such as thickness, structural integrity, thermal stability, and flexibility. An easy innovative technique based on atomic force microscopy was employed for evaluating mechanical properties of single nanofiber, which were found to be comparable to bulk zirconia. Nanofibers were tested for their high-temperature resistance using an electron beam. It showed resistance to radiation damage when irradiated with 1 MeV Kr2+ ion. Some zirconia nanofibers were also tested under high-intensity pulsed proton beam and maintained their structural integrity. This study shows for the first time that a ceramic nanofiber has been tested under different beams and irradiation condition to qualify their physical properties for practical use as accelerator targets. Advantages and challenges of such nanofibers as potential future targets over bulk material targets are discussed.more » « less
With recent developments in the field of smart textiles, researchers have been working toward fabricating architectures of nanofibers, known as nanoyarns, which mimic the geometry of a conventional yarn. In doing so, one can leverage the unique properties of nanoscale fibers, including high surface‐to‐volume ratio and tunable porosity, for the development of smart garments. In the last 5 years, researchers have produced nanoyarns from a limited number of polymers, including polyacrylonitrile (PAN) and poly(vinylidene fluoride) and its co‐polymers. However, to our knowledge, there has been little research on the solution properties and electrospinning parameters needed to fabricate these higher‐order architectures from nonwoven mats. In this work, a modified electrospinning setup, enclosed in a humidity‐controlled chamber, was developed to fabricate nanoyarns for integration into knitted textiles. We fabricated nanofibers and nanoyarns from PAN/DMF solutions and conducted a systematic study to analyze the effect of solution conductivity, viscosity, and electrospinning parameters (applied voltage, collector distance, and humidity) on fiber and yarn fabrication and morphology. Polymer concentration had a significant effect on fibrous cone and yarn fabrication. Low polymer concentrations resulted in poor cone formation, whereas high concentration resulted in dense cones that were difficult to draw into nanoyarns. Overall, the matrix of electrospinning parameters that resulted in the formation of homogenous nanofiber mats was larger than that of nanoyarn formation. Nanoyarn formation required higher polymer concentration and/or applied voltage than nonwoven mat formation. The influence of these parameters on nanoyarn formation and fiber diameter can be used to expand the library of spinnable nanoyarns and optimize their properties for specific applications. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci.
2018, 135, 46404.
Peptide nucleic acids (PNAs) have primarily been used to achieve therapeutic gene modulation through antisense strategies since their design in the 1990s. However, the application of PNAs as a functional nanomaterial has been more recent. We recently reported that
γ‐modified peptide nucleic acids ( γPNAs) could be used to enable formation of complex, self‐assembling nanofibers in select polar aprotic organic solvent mixtures. Here we demonstrate that distinct γPNA strands, each with a high density of γ‐modifications can form complex nanostructures at constant temperatures within 30 minutes. Additionally, we demonstrate DNA‐assisted isothermal growth of γPNA nanofibers, thereby overcoming a key hurdle for future scale‐up of applications related to nanofiber growth and micropatterning.
Carbon fiber reinforced polymer (CFRP) composites have been increasingly used in many vehicles such as airplanes, automobiles, and ships due to the advantages of high-strength, high-modulus, lightweight, and corrosion resistance. CFRP structures enhance the vehicle's performance, energy-efficiency, comfort, and safety. However, a common safety concern is how the CFRP materials perform when the vehicle is in fire and if there are enough time to safely evacuate the passengers. The elevated temperature can soften and decompose the polymer matrix, delaminate the CFRP laminate, and burn the CFRP through the contact with oxygen. As a result, the thermal and flammability response of CFRP is important for considering CFRP for vehicle applications; and some specialty high-temperature or flame/smoke/toxicity-proven resins have been investigated for CFRP parts manufacturing due to the needs. In this paper, a novel flame resistant hypothesis of utilizing the unique nano/micro- interlocked fiber reinforcing structure of the long-range carbon nanofiber z-threaded CFRP (ZT-CFRP) composite laminates for improving the flammability performance will be investigated. The carbon nanofibers (CNT) and carbon nanotubes (CNT), which have excellent thermal and mechanical properties, will be dispersed in an epoxy resin and will zig-zag thread through a carbon fiber fabric using an electrical/flow assisted impregnation process to create the unidirectional ZT-CFRP prepregs, respectively, which will be further processed into ZT-CFRP composite laminates. The UL-94 flammability test will be employed to characterize the ZT-CFRP laminates' flammability performance against the control baseline data of the regular CFRP, all without using any flame retardant chemicals. An impressive self-extinguishing flammability characteristic of the CNF based ZT-CFRP samples has been distinctly identified from all the samples. The UL-94 testing results and the effectiveness of using the long-range nanofiber z-threading strategy for enabling the novel nano/microstructure-induced flame resistant and self-extinguishing characteristics will be discussed.more » « less