skip to main content


The NSF Public Access Repository (NSF-PAR) system and access will be unavailable from 5:00 PM ET until 11:00 PM ET on Friday, June 21 due to maintenance. We apologize for the inconvenience.

Title: Impact of the Gibbs–Thomson Effect on Lithium Solubility in Silver Used as an Alloy Lithium-Ion Battery Anode
Award ID(s):
Author(s) / Creator(s):
; ; ;
Date Published:
Journal Name:
ACS Applied Energy Materials
Page Range / eLocation ID:
4547 to 4555
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Abstract

    Despite the potential to become the next‐generation energy storage technology, practical lithium–sulfur (Li–S) batteries are still plagued by the poor cyclability of the lithium‐metal anode and sluggish conversion kinetics of S species. In this study, lithium tritelluride (LiTe3), synthesized with a simple one‐step process, is introduced as a novel electrolyte additive for Li–S batteries. LiTe3quickly reacts with lithium polysulfides and functions as a redox mediator to greatly improve the cathode kinetics and the utilization of active materials in the cathode. Moreover, the formation of a Li2TeS3/Li2Te‐enriched interphase layer on the anode surface enhances ionic transport and stabilizes Li deposition. By regulating the chemistry on both the anode and cathode sides, this additive enables a stable operation of anode‐free Li–S batteries with only 0.1 mconcentration in conventional ether‐based electrolytes. The cell with the LiTe3additive retains 71% of the initial capacity after 100 cycles, while the control cell retains only 23%. More importantly, with high utilization of Te, the additive enables significantly better cyclability of anode‐free pouch full‐cells under lean electrolyte conditions.

    more » « less
  2. Pre-lithiation is the most effective method to overcome the initial capacity loss of high-capacity electrodes and has the potential to be used in beyond-conventional lithium-ion batteries. In this article we focus on two types of pre-lithiation: the first type can be applied to batteries in which the cathode has been fully lithiated but the anode has a large initial capacity loss, such as batteries made with lithium metal oxide cathode and silicon-carbon anode. The second type can be applied to batteries in which both electrodes are initially lithium-free and suffer a loss of lithium during the initial cycles, such as batteries made with sulfurized-polyacrylonitrile cathode and silicon-carbon anode. We describe the pre-lithiation procedures and electrode potential profiles during pre-lithiation corresponding to different pre-lithiation sources for both types of pre-lithiation. We also derive formulas for the theoretical specific energy and energy density that are based entirely on measurable parameters such as specific capacities, porosities, mass densities of two electrodes and extra lithium source, Coulombic efficiencies of electrodes, and the voltage of the cell. These formulas can be applied to different pre-lithiation sources to predict the specific energy of conventional and beyond-conventional lithium-ion batteries as a function of the type of pre-lithiation. 
    more » « less