skip to main content

Explore Research Products in the NSF-PAR

  • NSF Public Access
  • Search Results
  • Boron and Oxygen Isotope Systematics of Two Hydrothermal Systems in Modern Back-Arc and Arc Crust (PACMANUS and Brothers Volcano, W-Pacific)
Title: Boron and Oxygen Isotope Systematics of Two Hydrothermal Systems in Modern Back-Arc and Arc Crust (PACMANUS and Brothers Volcano, W-Pacific)
Abstract A better characterization of subsurface processes in hydrothermal systems is key to a deeper understanding of fluid-rock interaction and ore-forming mechanisms. Vent systems in oceanic crust close to subduction zones, like at Brothers volcano and in the eastern Manus basin, are known to be especially ore rich. We measured B concentrations and isotope ratios of unaltered and altered lava that were recovered from drilling sites at Brothers volcano and Snowcap (eastern Manus basin) to test their sensitivity for changing alteration conditions with depth. In addition, for Brothers volcano, quartz-water oxygen isotope thermometry was used to constrain variations in alteration temperature with depth. All altered rocks are depleted in B compared to unaltered rocks and point to interaction with a high-temperature (>150°C) hydrothermal fluid. The δ11B values of altered rocks are variable, from slightly lower to significantly higher than those of unaltered rocks. For Brothers volcano, at the Upper Cone, we suggest a gradual evolution from a fluid- to a more rock-dominated system with increasing depth. In contrast, the downhole variations of δ11B at Snowcap as well as δ11B and δ18O variations at the NW Caldera (Site U1530) of Brothers volcano are suggested to indicate changes in water-rock ratios and, in the latter case, also temperature, with depth due to permeability contrasts between different lithology and alteration type boundaries. Furthermore, δ11B values from the NW Caldera (Site U1527) might point to a structural impact on the fluid pathway. These differences in the subseafloor fluid flow regime, which ranges from more pervasive and fluid-controlled to stronger and controlled by lithological and structural features, have significant influence on alteration conditions and may also impact metal precipitation within the sea floor.  more » « less
Award ID(s):
2004618
NSF-PAR ID:
10422006
Author(s) / Creator(s):
; ; ; ; ; ; ; ;
Date Published:
Journal Name:
Economic Geology
ISSN:
0361-0128
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ( , Proceedings of the International Ocean Discovery Program)
    null (Ed.)
    Volcanic arcs are the surface expression of magmatic systems that result from subduction of mostly oceanic lithosphere at convergent plate boundaries. Arcs with a submarine component include intraoceanic arcs and island arcs that span almost 22,000 km on Earth’s surface, and the vast majority of them are located in the Pacific region. Hydrothermal systems hosted by submarine arc volcanoes commonly contain a large component of magmatic fluid. This magmatic-hydrothermal signature, coupled with the shallow water depths of arc volcanoes and their high volatile contents, strongly influences the chemistry of the fluids and resulting mineralization and likely has important consequences for the biota associated with these systems. The high metal content and very acidic fluids in these hydrothermal systems are thought to be important analogs to numerous porphyry copper and epithermal gold deposits mined today on land. During International Ocean Discovery Program (IODP) Expedition 376 (5 May–5 July 2018), a series of five sites was drilled on Brothers volcano in the Kermadec arc. The expedition was designed to provide the missing link (i.e., the third dimension) in our understanding of hydrothermal activity and mineral deposit formation at submarine arc volcanoes and the relationship between the discharge of magmatic fluids and the deep biosphere. Brothers volcano hosts two active and distinct hydrothermal systems: one is seawater influenced and the other is affected by magmatic fluids (largely gases). In total, 222.4 m of volcaniclastics and lavas were recovered from the five sites drilled, which include Sites U1527 and U1530 in the Northwest (NW) Caldera seawater-influenced hydrothermal field; Sites U1528 and U1531 in the magmatic fluid-influenced hydrothermal fields of the Upper and Lower Cones, respectively; and Site U1529, located within an area of low crustal magnetization that marks the West (W) Caldera upflow zone on the caldera floor. Downhole logging and borehole fluid sampling were completed at two sites, and two tests of a prototype turbine-driven coring system (designed by the Center for Deep Earth Exploration [CDEX] at Japan Agency for Marine-Earth Science and Technology [JAMSTEC]) for drilling and coring hard rocks were conducted. Core recovered from all five sites consists of dacitic volcaniclastics and lava flows with only limited chemical variability relative to the overall range in composition of dacites in the Kermadec arc. Pervasive alteration with complex and variable mineral assemblages attest to a highly dynamic hydrothermal system. The upper parts of several drill holes at the NW Caldera hydrothermal field are characterized by secondary mineral assemblages of goethite + opal + zeolites that result from low-temperature (<150°C) reaction of rock with seawater. At depth, NW Caldera Site U1527 exhibits a higher temperature (~250°C) secondary mineral assemblage dominated by chlorite + quartz + illite + pyrite. An older mineral assemblage dominated by diaspore + quartz + pyrophyllite + rutile at the bottom of Hole U1530A is indicative of acidic fluids with temperatures of ~230°–320°C. In contrast, the alteration assemblage at Site U1528 on the Upper Cone is dominated by illite + natroalunite + pyrophyllite + quartz + opal + pyrite, which attests to high-temperature reaction of rocks with acid-sulfate fluids derived from degassed magmatic volatiles and the disproportionation of magmatic SO2. These intensely altered rocks exhibit extreme depletion of major cation oxides, such as MgO, K2O, CaO, MnO, and Na2O. Furthermore, very acidic (as low as pH 1.8), relatively hot (≤236°C) fluids collected at 160, 279, and 313 meters below seafloor in Hole U1528D have chemical compositions indicative of magmatic gas input. In addition, preliminary fluid inclusion data provide evidence for involvement of two distinct fluids: phase-separated (modified) seawater and a ~360°C hypersaline brine, which alters the volcanic rock and potentially transports metals in the system. The material and data recovered during Expedition 376 provide new stratigraphic, lithologic, and geochemical constraints on the development and evolution of Brothers volcano and its hydrothermal systems. Insights into the consequences of the different types of fluid–rock reactions for the microbiological ecosystem elucidated by drilling at Brothers volcano await shore-based studies. 
    more » « less
  2. ; ; ( , Preliminary report)
    null (Ed.)
    Volcanic arcs are the surface expression of magmatic systems that result from the subduction of mostly oceanic lithosphere at convergent plate boundaries. Arcs with a submarine component include intraoceanic arcs and island arcs that span almost 22,000 km on Earth’s surface, the vast majority of which are located in the Pacific region. Hydrothermal systems hosted by submarine arc volcanoes commonly contain a large component of magmatic fluid. This magmatic-hydrothermal signature, coupled with the shallow water depths of arc volcanoes and their high volatile contents, strongly influences the chemistry of the fluids and resulting mineralization and likely has important consequences for the biota associated with these systems. The high metal contents and very acidic fluids in these hydrothermal systems are thought to be important analogs to numerous porphyry copper and epithermal gold deposits mined today on land. During International Ocean Discovery Program (IODP) Expedition 376 (5 May–5 July 2018), a series of five sites was drilled on Brothers volcano in the Kermadec arc. The expedition was designed to provide the missing link (i.e., the third dimension) in our understanding of hydrothermal activity and mineral deposit formation at submarine arc volcanoes and the relationship between the discharge of magmatic fluids and the deep biosphere. Brothers volcano hosts two active and distinct hydrothermal systems: one seawater-influenced and the other affected by magmatic fluids (largely gases). A total of 222.4 m of volcaniclastics and lavas was recovered from the five sites drilled, which include Sites U1527 and U1530 in the Northwest (NW) Caldera seawater-influenced hydrothermal field; Sites U1528 and U1531 in the magmatic fluid-influenced hydrothermal fields of the Upper and Lower Cones, respectively; and Site U1529, located in a magnetic low that marks the West (W) Caldera upflow zone on the caldera floor. Downhole logging and borehole fluid sampling were completed at two sites, and two tests of a prototype turbine-driven coring system (designed by the Center for Deep Earth Exploration [CDEX] at Japan Agency for Marine-Earth Science and Technology [JAMSTEC]) for drilling and coring hard rocks were conducted. Core recovered from all five sites consists of dacitic volcaniclastics and lava flows with only limited chemical variability relative to the overall range in composition of dacites in the Kermadec arc. Pervasive alteration with complex and variable mineral assemblages attest to a highly dynamic hydrothermal system. The upper parts of several drill holes at the NW Caldera hydrothermal field are characterized by secondary mineral assemblages of goethite + opal-A + zeolites that result from low-temperature (<150°C) reaction of rock with seawater. At depth, NW Caldera Site U1527 exhibits a higher temperature (~250°C) secondary mineral assemblage dominated by chlorite + quartz + illite + pyrite. An older mineral assemblage dominated by diaspore + quartz + pyrophyllite + rutile at the bottom of Hole U1530A is indicative of acidic fluids with temperatures of ~230°–320°C. By contrast, the alteration assemblage at Site U1528 on the Upper Cone is dominated by illite + natroalunite + pyrophyllite + quartz + opal-CT + pyrite, which attests to high-temperature reaction of rocks with acid-sulfate fluids derived from the disproportionation of magmatic SO2. These intensely altered rocks exhibit extreme depletion of major cation oxides, such as MgO, K2O, CaO, MnO, and Na2O. Furthermore, very acidic (as low as pH 1.8), relatively hot (≤247°C) fluids collected at depths of 160, 279, and 313 meters below seafloor (mbsf) in Hole U1528D have chemical compositions indicative of magmatic gas input. In addition, preliminary fluid inclusion data provide evidence for involvement of two distinct fluids: phase-separated (modified) seawater and an ~360°C hypersaline brine, altering the volcanic rock and potentially transporting metals in the system. The material and data recovered during Expedition 376 provide new stratigraphic, lithologic, and geochemical constraints on the development and evolution of Brothers volcano and its hydrothermal systems. Insights into the consequences of the different types of fluid-rock reactions for the microbiological ecosystem elucidated by drilling at Brothers await shore-based studies. 
    more » « less
  3. ; ; ( , Scientific prospectus)
    null (Ed.)
    Almost two-thirds of Earth’s submarine volcanism is expressed in the ocean basins along the ~65,000 km long mid-ocean-ridge (MOR) system, but the remaining third takes place along intraoceanic arcs and seamounts. The 22,000 km long intraoceanic arc system appears to surpass the MOR system in terms of both the frequency of hydrothermal activity, with several sites per 100 km of arc, and the range in chemical composition of the fluids being discharged. Hydrothermal systems hosted by submarine arc volcanoes differ substantially from those in spreading environments in that they commonly contain a large component of magmatic fluid. Our primary scientific goal is to discover the fundamental underlying processes that develop as a consequence of this difference. A magmatic-hydrothermal signature, coupled with the shallow depths of arc volcanoes and their high-volatile contents, strongly influences the chemistry of fluids and the resulting mineralization and likely has important consequences for the biota associated with these systems. Because of the high metal contents and very acidic fluids, these hydrothermal systems are also thought to be important analogs of many porphyry copper and epithermal gold deposits mined today on land. Drilling at Brothers volcano on the Kermadec arc will provide the missing link (i.e., the third dimension) in our understanding of mineral deposit formation along arcs, the subseafloor architecture of these volcanoes and their related permeability, as well as the relationship between the discharge of magmatic fluids and the deep biosphere. Expedition 376 will drill and log two caldera sites, one on the rim of the caldera and a second inside the caldera, and a third site at the summit of a volcanic cone, located inside the caldera at Brothers. These sites represent discharge zones of geochemically distinct fluids that are variably affected by magmatic volatile input, allowing us to directly address the consequences of magma degassing for metal transport to the seafloor and its effect on the functioning of microbial communities. Drilling will provide access to critical zones dominated by magma degassing and high-temperature hydrothermal circulation over depth intervals regarded as crucial, not only in the development of multiphase mineralizing systems but also in identifying subsurface microbially habitable environments. The specific objectives of Expedition 376 are • To characterize the subvolcano, magma chamber–derived volatile phase to test model-based predictions that this is either a single-phase gas or two-phase brine-vapor; • To determine the subseafloor distribution of base and precious metals and metalloids and the reactions that have taken place along pathways to the seafloor; • To quantify the mechanisms and extent of fluid-rock interaction and consequences for mass transfer of metals and metalloids into the ocean and the role of magmatically derived carbon and sulfur species in mediating these fluxes; and • To assess the diversity, extent, and metabolic pathways of microbial life in an extreme, metal-toxic, and acidic volcanic environment. 
    more » « less
  4. ( , Ore geology reviews)
    null (Ed.)
    The Chahgaz iron oxide-apatite (IOA) deposit is one of the main IOA deposits in the Bafq metallogenic province, Central Iran. The Chahgaz mineral deposit is hosted by Early Cambrian felsic to intermediate, altered subvolcanic to effusive rocks that range compositionally from granite to diorite. Geochemical, geochronologic and tectonomagmatic investigations of various host rock types in the Bafq province indicate that mineralization was the product of Early Cambrian active continental margin processes that evolved calc-alkaline felsic igneous rocks followed by formation of diabase dykes in a back-arc basin environment. Magnetite is present in massive magnetite-rich ore bodies and veinlets that cut the massive ore bodies. Detailed macro- and micro-scopic characterization of mineralized samples and host rocks reveals a paragenetic sequence containing three generations of magnetite that are distinguished from one another compositionally and texturally. The massive ores contain apatite in trace amounts, consistent with IOA deposits globally, and locally exhibit textures that are visually similar to lava flow structures, as described for the El Laco IOA deposit, Chile. The ore bodies contain miarolitic cavities that are filled by calcite, hematite and quartz. The host rocks for the Chahgaz deposit have undergone widespread hydrothermal metasomatism including Na-Ca, K-, Mg-, Si-, sericitic, argillic and carbonatization alteration. The compositions of two generations of magnetite, referred to as Mag1 and Mag2, in massive ore overlap compositions reported for igneous and high-temperature magmatic-hydrothermal magnetite. The third generation of magnetite, which is referred to as Mag3 and is present in veinlets cross-cutting the massive magnetite ore bodies, overlaps compositions reported for low to moderate temperature magmatichydrothermal magnetite. Pyrite is present as disseminated grains coeval with Mag1 and micro-fracture filling in the massive magnetite-rich ore bodies. The δ18O values obtained for magnetite from representative samples of massive magnetite Mag1 ore range between 2.18 and 6.32‰ and are consistent with δ18O values reported for igneous and magmatic-hydrothermal magnetite from other deposits in the Bafq district and globally. The δ34S values for pyrite range from 22.54 to 24.94‰ and are consistent with an evaporitic sulfur source; plausibly by magma contamination with evaporitic rocks of the Early Cambrian Volcano-Sedimentary Sequence (ECVSS). The data presented here are consistent with formation of the massive magnetite-rich ore bodies in the Chahgaz IOA deposit by an iron-rich magmatichydrothermal fluid. 
    more » « less
  5. ; ; ; ( , Preliminary report)
    null (Ed.)
    International Ocean Discovery Program (IODP) Expedition 357 successfully cored an east–west transect across the southern wall of Atlantis Massif on the western flank of the Mid-Atlantic Ridge to study the links between serpentinization processes and microbial activity in the shallow subsurface of highly altered ultramafic and mafic sequences that have been uplifted to the seafloor along a major detachment fault zone. The primary goals of this expedition were to (1) examine the role of serpentinization in driving hydrothermal systems, sustaining microbial communities, and sequestering carbon; (2) characterize the tectonomagmatic processes that lead to lithospheric heterogeneities and detachment faulting; and (3) assess how abiotic and biotic processes change with variations in rock type and progressive exposure on the seafloor. To accomplish these objectives, we developed a coring and sampling strategy based around the use of seabed rock drills—the first time that such systems have been used in the scientific ocean drilling programs. This technology was chosen in hopes of achieving high recovery of the carbonate cap sequences and intact contact and deformation relationships. The expedition plans also included several engineering developments to assess geochemical parameters during drilling; sample bottom water before and after drilling; supply synthetic tracers during drilling for contamination assessment; gather downhole electrical resistivity and magnetic susceptibility logs for assessing fractures, fluid flow, and extent of serpentinization; and seal boreholes to provide opportunities for future experiments. Seventeen holes were drilled at nine sites across Atlantis Massif, with two sites on the eastern end of the southern wall (Sites M0068 and M0075), three sites in the central section of the southern wall north of the Lost City hydrothermal field (Sites M0069, M0072, and M0076), two sites on the western end (Sites M0071 and M0073), and two sites north of the southern wall in the direction of the central dome of the massif and Integrated Ocean Drilling Program Site U1309 (Sites M0070 and M0074). Use of seabed rock drills enabled collection of more than 57 m of core, with borehole penetration ranging from 1.3 to 16.44 meters below seafloor and core recoveries as high as 75% of total penetration. This high level of recovery of shallow mantle sequences is unprecedented in the history of ocean drilling. The cores recovered along the southern wall of Atlantis Massif have highly heterogeneous lithologies, types of alteration, and degrees of deformation. The ultramafic rocks are dominated by harzburgites with intervals of dunite and minor pyroxenite veins, as well as gabbroic rocks occurring as melt impregnations and veins, all of which provide information about early magmatic processes and the magmatic evolution in the southernmost portion of Atlantis Massif. Dolerite dikes and basaltic rocks represent the latest stage of magmatic activity. Overall, the ultramafic rocks recovered during Expedition 357 revealed a high degree of serpentinization, as well as metasomatic talc-amphibole-chlorite overprinting and local rodingitization. Metasomatism postdates an early phase of serpentinization but predates late-stage intrusion and alteration of dolerite dikes and the extrusion of basalt. The intensity of alteration is generally lower in the gabbroic and doleritic rocks. Chilled margins in dolerite intruded into talc-amphibole-chlorite schists are observed at the most eastern Site M0075. Deformation in Expedition 357 cores is variable and dominated by brecciation and formation of localized shear zones; the degree of carbonate veining was lower than anticipated. All types of variably altered and deformed ultramafic and mafic rocks occur as components in sedimentary breccias and as fault scarp rubble. The sedimentary cap rocks include basaltic breccias with a carbonate sand matrix and/or fossiliferous carbonate. Fresh glass on basaltic components was observed in some of the breccias. The expedition also successfully applied new technologies, namely (1) extensively using an in situ sensor package and water sampling system on the seabed drills for evaluating real-time dissolved oxygen and methane, pH, oxidation-reduction potential, temperature, and conductivity during drilling; (2) deploying a borehole plug system for sealing seabed drill boreholes at four sites to allow access for future sampling; and (3) proving that tracers can be delivered into drilling fluids when using seabed drills. The rock drill sensor packages and water sampling enabled detection of elevated dissolved methane and hydrogen concentrations during and/or after drilling, with “hot spots” of hydrogen observed over Sites M0068–M0072 and methane over Sites M0070–M0072. Shipboard determination of contamination tracer delivery confirmed appropriate sample handling procedures for microbiological and geochemical analyses, which will aid all subsequent microbiological investigations that are part of the science party sampling plans, as well as verify this new tracer delivery technology for seabed drill rigs. Shipboard investigation of biomass density in select samples revealed relatively low and variable cell densities, and enrichment experiments set up shipboard reveal growth. Thus, we anticipate achieving many of the deep biosphere–related objectives of the expedition through continued scientific investigation in the coming years. Finally, although not an objective of the expedition, we were serendipitously able to generate a high-resolution (20 m per pixel) multibeam bathymetry map across the entire Atlantis Massif and the nearby fracture zone, Mid-Atlantic Ridge, and eastern conjugate, taking advantage of weather and operational downtime. This will assist science party members in evaluating and interpreting tectonic and mass-wasting processes at Atlantis Massif. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email