An official website of the United States government
The monumental challenge associated with food waste management has emphasized the dire need of upcycling it into useful materials, including ultraporous adsorbent. Among various technologies of maximizing porosity of such waste-derived porous sorbents, potassium hydroxide (KOH) activation of food waste hydrochar has emerged to be a prominent one. There are two different ways to synthesize ultraporous adsorbent, namely, direct chemical activation (DCA) and char impregnation (CI). This study aims in investigating the environmental impact comparison of DCA and CI using life cycle assessment (LCA). The results demonstrate that CI processes in an environmentally sound way for synthesizing ultraporous carbons from food waste, where freshwater ecotoxicity (57.2%) plays the major contributing role in environmental impact category, primarily due to acid neutralization in the mixer unit of the CI technique of activation. In addition, the dryer unit in the CI process, which is powered by natural gas combustion, was responsible for climate change impact category. Therefore, as an alternative, employment of renewable solar energy (from solar thermal power plant) was also investigated, and results highlighted the possibility of achieving reduced climate change and acidification potential.
more »
« less
Jointly Managing Electrical and Thermal Energy in Solar- and Battery-powered Computer Systems
Environmentally-powered computer systems operate on renewable energy harvested from their environment, such as solar or wind, and stored in batteries. While harvesting environmental energy has long been necessary for small-scale embedded systems without access to external power sources, it is also increasingly important in designing sustainable larger-scale systems for edge applications. For sustained operations, such systems must consider not only the electrical energy but also the thermal energy available in the environment in their design and operation. Unfortunately, prior work generally ignores the impact of thermal effects, and instead implicitly assumes ideal temperatures. To address the problem, we develop a thermodynamic model that captures the interplay of elec- trical and thermal energy in environmentally-powered computer systems. The model captures the effect of environmental condi- tions, the system’s physical properties, and workload scheduling on performance. In evaluating our model, we distill the thermal effects that impact these systems using a small-scale prototype and a programmable incubator. We then leverage our model to show how considering these thermal effects in designing and operating environmentally-powered computer systems of varying scales can improve their energy-efficiency, performance, and availability.
more »
« less
- PAR ID:
- 10433377
- Date Published:
- Journal Name:
- 14th ACM International Conference on Future Energy Systems
- Page Range / eLocation ID:
- 132 to 143
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Batteryless wearables use energy harvested from the environment, eliminating the burden of charging or replacing batteries. This makes them convenient and environmentally friendly. However, these benefits come at a price. Batteryless wearables operate intermittently (based on energy availability), which adds complexity to their design and introduces usability limitations not present in their battery-powered counterparts. In this paper, we conduct a scenario-based study with 400 wearable users to explore how users perceive the inherent trade-offs of batteryless wearable devices. Our results reveal users’ concerns, expectations, and preferences when transitioning from battery-powered to batteryless wearable use. We discuss how the findings of this study can inform the design of usable batteryless wearables.more » « less
-
Background: The amount of literature on environmental migration is increasing. However, existing studies exhibit contradictory results. A systematic synthesis of the environment–migration relationship is much needed. Objective: This study summarizes research findings, calculates the effect sizes of environmental stressors, identifies publication bias, and investigates heterogeneous environmental effects on migration. Methods: We collected 3,380 estimates from 128 studies published between 2000 and 2020 to explore the environment–migration relationship and performed weighted instrumental variable regression to unveil the heterogeneous environmental effects on out- and net migration. Results: The majority of environmental stressors were not important predictors of out- and net migration. Among the results showing environmental impacts on migration, 58% and 68% reported that environmental stressors increased out- and net migration, respectively, while 58% reported that environmental stressors decreased in-migration. The overall environmental impact on migration was small; however, disaster-related stressors showed a medium effect, and rapid-onset stressors had a stronger impact than slow-onset ones. Multivariate meta-regression analyses demonstrated that environmental stressors were more likely to trigger internal migration than international migration and that developed countries were less likely to experience out-migration. Rapid-onset environmental stressors did not increase out-migration but played an important role in decreasing net migration toward environmentally stressed areas. Meanwhile, we also found a publication bias toward studies showing a positive relationship between environmental stressors and migration in the previous environmental migration literature. Conclusions: Environmental stressors may affect migration; however, the environmental effect depends on migration measurements, environmental stressors' forces and rapidity, and the context in which migration takes place. Contribution: This study contributes to migration studies by synthesizing and validating the environment–migration relationship and enhancing our understanding of how and under what circumstances environmental stressors may affect migration.more » « less
-
Flight-time failures of small Uncrewed Aerial Systems (sUAS) can have a severe impact on people or the environment. Therefore, sUAS applications must be thoroughly evaluated and tested to ensure their adherence to specified requirements, and safe behavior under real-world conditions, such as poor weather, wireless interference, and satellite failure. However, current simulation environments for autonomous vehicles, including sUAS, provide limited support for validating their behavior in diverse environmental contexts and moreover, lack a test harness to facilitate structured testing based on system-level requirements. We address these shortcomings by eliciting and specifying requirements for an sUAS testing and simulation platform, and developing and deploying it. The constructed platform, DroneWorld (\DW), allows sUAS developers to define the operating context, configure multi-sUAS mission requirements, specify safety properties, and deploy their own custom sUAS applications in a high-fidelity 3D environment. The DroneWorld Monitoring system collects runtime data from sUAS and the environment, analyzes compliance with safety properties, and captures violations. We report on two case studies in which we used our platform prior to real-world sUAS deployments, in order to evaluate sUAS mission behavior in various environmental contexts. Furthermore, we conducted a study with developers and found that DroneWorld simplifies the process of specifying requirements-driven test scenarios and analyzing acceptance test results.more » « less
-
Energetic ionic liquids (EILs) have various industrial applications because they release chemically stored energy under certain conditions. They can avoid some environmental problems caused by traditionally used toxic fuels. EILs, which are environmentally friendly and safer, are emerging as an alternative source for hypergolic bipropellant fuels. This review focuses on the crucial thermophysical properties of the EILs. The properties of imidazolium and triazolium-based ionic liquids (ILs) are discussed here. The thermophysical properties addressed, such as glass transition temperature, viscosity, and thermal stability, are critical for designing EILs to meet the need for sustainable energy solutions. Imidazolium-based ILs have tunable physical properties making them ideal for use in energy storage while triazolium-based ILs have thermal stability and energetic potential. As a result, it is important to understand and compile thermophysical properties so they can help researchers synthesize tailored compounds with desirable characteristics, advancing their application in energy storage and propulsion technologies.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Conference Paper:
- https://doi.org/10.1145/3575813.3595191
