skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Mid-infrared rainbow light-emitting diodes
We demonstrate a room-temperature all-epitaxial guided-mode resonance light-emitting diode operating in the mid-wave infrared. The device comprises a dielectric waveguide with an AlGaAsSb p−i−n diode core, below a layer of grating-patterned GaSb and above a highly doped, and thus, low index, InAsSb layer. Light emitted from the device active region into propagating modes in the waveguide scatters into free space via the GaSb grating, giving rise to spectrally narrow features that shift with emission angle across much of the mid-wave infrared. For collection angles approaching 0°, we are able to obtain linewidths of ∼2.4 meV across the spectral/angular emission of the LED, corresponding to λ/Δλ∼570. Fine control of emission wavelength can be achieved by tuning the applied current, which causes a redshift of approximately 20 nm due to the thermo-optic effect. The presented device has the potential for use in compact, high bandwidth, and low-cost mid-wave infrared sensing applications requiring spectral discrimination.  more » « less
Award ID(s):
1926187
PAR ID:
10440297
Author(s) / Creator(s):
; ; ;
Publisher / Repository:
American Institute of Physics
Date Published:
Journal Name:
Applied Physics Letters
Volume:
121
Issue:
26
ISSN:
0003-6951
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; ; (, IEEE Journal of Quantum Electronics)
    A fully-functional photonic integrated circuit (PIC) platform with supporting active and passive components in the extended short- and mid-wave infrared spectral regime is of significant research interest for next-generation optical systems. Here we design offset quantum well-based photonic integrated circuits which primarily consist of four section-based widely tunable single-mode lasers emitting at 2560 nm. The platform requires the selective removal of InGaAsSb multi-quantum wells located above a GaSb-based optical waveguide layer and then subsequent single blanket GaSb regrowth. Encouraging preliminary experimental results on regrowth are also reported to confirm the feasibility of the proposed PICs. The simulation result for the tunable laser design shows that a tuning range as wide as ~120 nm is possible. The quasi-theoretical work performed here is an initial step towards demonstrating complex non-telecommunication PICs which could offer a comprehensive range of photonic functionalities. 
    more » « less
  2. ; ; ; ; (, Applied Physics Letters)
    We demonstrate room temperature continuous wave THz sources based on intracavity difference-frequency generation from mid-infrared quantum cascade lasers. Buried ridge, buried composite distributed-feedback waveguide with Čerenkov phase-matching scheme is used to reduce the waveguide loss and enhance the heat dissipation for continuous wave operation. Continuous emission at 3.6 THz with a side-mode suppression ratio of 20 dB and output power up to 3 μW are achieved, respectively. THz peak power is further scaled up to 1.4 mW in pulsed mode by increasing the mid-infrared power through increasing the active region doping and device area. 
    more » « less
  3. ; ; ; ; (, Applied Physics Letters)
    We present a widely tunable, monolithic terahertz source based on intracavity difference frequency generation within a mid-infrared quantum cascade laser at room temperature. A three-section ridge waveguide laser design with two sampled grating sections and a distributed-Bragg section is used to achieve the terahertz (THz) frequency tuning. Room temperature single mode THz emission with a wide tunable frequency range of 2.6–4.2 THz (∼47% of the central frequency) and THz power up to 0.1 mW is demonstrated, making such device an ideal candidate for THz spectroscopy and sensing. 
    more » « less
  4. ; ; (, Applied Physics Letters)
    We report on the structural, chemical, and optical properties of titanium sesquioxide Ti2O3 thin films on single-crystal sapphire substrates by pulsed laser deposition. The thin film of Ti2O3 on sapphire exhibits light absorption of around 25%–45% in the wavelength range of 2–10 μm. Here, we design an infrared photodetector structure based on Ti2O3, enhanced by a resonant metasurface, to improve its light absorption in mid-wave and long-wave infrared windows. We show that light absorption in the mid-wave infrared window (wavelength 3–5 μm) in the active Ti2O3 layer can be significantly enhanced from 30%–40% to more than 80% utilizing a thin resonant metasurface made of low-loss silicon, facilitating efficient scattering in the active layer. Furthermore, we compare the absorptance of the Ti2O3 layer with that of conventional semiconductors, such as InSb, InAs, and HgCdTe, operating in the infrared range with a wavelength of 2–10 μm and demonstrate that the absorption in the Ti2O3 film is significantly higher than in these conventional semiconductors due to the narrow-bandgap characteristics of Ti2O3. The proposed designs can be used to tailor the wavelengths of photodetection across the near- and mid-infrared ranges. 
    more » « less
  5. ; ; ; ; ; ; ; ; ; (, Advanced Optical Materials)
    Abstract Electrically pumped lasing from hybrid organic–inorganic metal‐halide perovskite semiconductors could lead to nonepitaxial diode lasers that are tunable throughout the visible and near‐infrared spectrum; however, a viable laser diode architecture has not been demonstrated to date. Here, an important step toward this goal is achieved by demonstrating two distinct distributed feedback light‐emitting diode architectures that achieve low threshold, optically pumped lasing. Bottom‐ and top‐emitting perovskite light‐emitting diodes are fabricated on glass and Si substrates, respectively, using a polydimethylsiloxane stamp in the latter case to nanoimprint a second‐order distributed feedback grating directly into the methylammonium lead iodide active layer. The devices exhibit room temperature thresholds as low as ≈6 µJ cm−2, a peak external quantum efficiency of ≈0.1%, and a maximum current density of ≈2 A cm−2that is presently limited by degradation associated with excessive leakage current. In this low current regime, electrical injection does not adversely affect the optical pump threshold, leading to a projected threshold current density of ≈2 kA cm−2. Operation at low temperature can significantly decrease this threshold, but must overcome extrinsic carrier freeze‐out in the doped organic transport layers to maintain a reasonable drive voltage. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email