An official website of the United States government
Abstract Single crystals of disordered Mn4–xCrxAl11have been synthesized via the flux method. EDS on several crystals of various sizes and shapes revealed an average molar ratio of 17:9:74 for Mn:Cr:Al, while X-ray diffraction on three different crystals yield compositions Mn2.26Cr1.74Al11(Mn4–xCrxAl11,x= 1.74), Mn0.83Cr3.17Al11, and Mn1.07Cr2.93Al11. This compound crystallizes in space groupP–1, isostructural with both Mn4Al11and Cr4Al11. Magnetic measurements on several crystals show that this disordered compound is ferrimagnetic with a low effective moment ofμeff≈1.012±0.004 μB/f.u. and a non-reachable transition temperature. DFT calculations display opening of a bandgap in the spin-up channel near the Fermi level with increasing Cr content, an indication of half-metallicity.
more »
« less
Europium Addition Reduces Local Structural Disorder and Enhances Photoluminescent Yield in Perovskite CsPbBr 3
Abstract Correlative X‐ray microscopy, including synchrotron X‐ray diffraction and fluorescence, is leveraged to understand the local role of europium as a B‐site additive in CsPbBr3perovskite crystals. Europium addition reduces microstrain in the perovskite, despite the fact that the degree of europium incorporation into the perovskite varies locally, with a maximum loading over twice the nominal stoichiometry. The presence of europium improves photoluminescence yield and bandwidth, while shifting the emission to bluer wavelengths. Finally, europium‐containing crystals have greatly improved X‐ray hardness. The findings show promise for europium as an additive in perovskite optoelectronic devices.
more »
« less
- Award ID(s):
- 1848371
- PAR ID:
- 10446493
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Advanced Optical Materials
- Volume:
- 9
- Issue:
- 18
- ISSN:
- 2195-1071
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Perovskite solar cells (PSCs) have attracted significant research efforts due to their remarkable performance. However, most perovskite films are prepared by the antisolvent method which is not suitable for practical applications. Herein, a (FA0.83MA0.17)0.95Cs0.05Pb(I0.83Br0.17)3(CsFAMA) perovskite film fabrication technique is developed using solvent volatilization without any antisolvents. The films are formed through recrystallization via the intermediate phase CsMAFAPbIxClyBrzduring annealing, leading to high‐quality perovskite films. The perovskite growth mechanism is investigated in terms of controlling the amount of formamidinium iodide and methylammonium chloride in the precursor solutions. The oriental growth of the films via the intermediate phase is confirmed by the grazing‐incidence wide‐angle X‐ray scattering measurements. The photovoltaic properties of the perovskite films are investigated. The PSCs based on the films fabricated using the method exhibit a high efficiency of 20.6%. The method developed in this work is based on solvent volatilization, which exhibits significant potential in high reproducibility, facile operation, and large‐scale production.more » « less
-
Abstract Polarimetric infrared (IR) detection bolsters IR thermography by leveraging the polarization of light. Optical anisotropy, i.e., birefringence and dichroism, can be leveraged to achieve polarimetric detection. Recently, giant optical anisotropy is discovered in quasi‐1D narrow‐bandgap hexagonal perovskite sulfides, A1+xTiS3, specifically BaTiS3and Sr9/8TiS3. In these materials, the critical role of atomic‐scale structure modulations in the unconventional electrical, optical, and thermal properties raises the broader question of the nature of other materials that belong to this family. To address this issue, for the first time, high‐quality single crystals of a largely unexplored member of the A1+xTiX3(X = S, Se) family, BaTiSe3are synthesized. Single‐crystal X‐ray diffraction determined the room‐temperature structure with theP31cspace group, which is a superstructure of the earlier reportedP63/mmcstructure. The crystal structure of BaTiSe3features antiparallelc‐axis displacements similar to but of lower symmetry than BaTiS3, verified by the polarization dependent Raman spectroscopy. Fourier transform infrared (FTIR) spectroscopy is used to characterize the optical anisotropy of BaTiSe3, whose refractive index along the ordinary (E⊥c) and extraordinary (E‖c) optical axes is quantitatively determined by combining ellipsometry studies with FTIR. With a giant birefringence Δn∼ 0.9, BaTiSe3emerges as a new candidate for miniaturized birefringent optics for mid‐wave infrared to long‐wave infrared imaging.more » « less
-
Abstract Lead halide perovskites have recently attracted intensive attention as competitive alternative candidates of legacy compound materials CdTe, CdZnTe, and TlBr for high sensitivity energy‐resolving gamma‐ray detection at room temperature. However, the use of lead in these lead halide perovskites, which is necessary for increasing the stopping power of gamma radiation, poses a serious environmental concern due to the high toxicity of lead. In this regard, environmental‐friendly perovskite‐based gamma‐ray detector materials with key energy‐resolving capabilities are highly desired. Here, the gamma energy‐resolving performance of a new class of all‐inorganic and lead‐free Cs2AgBiBr6double perovskite single crystals (SCs) is reported. Two types of Cs2AgBiBr6SCs, prepared by Bi‐normal and Bi‐poor precursor solutions, respectively, have been grown. Their mobilities and response to gamma radiation are presented. Density of trap states in Bi‐poor Cs2AgBiBr6SCs (2.65 × 109 cm−3) is one order of magnitude lower than that in Bi‐normal Cs2AgBiBr6SCs (3.85 × 1010 cm−3). Using laser‐induced photocurrent measurements, the obtained mobility–lifetime (μ–τ) product in Bi‐poor Cs2AgBiBr6SCs is 1.47 × 10−3 cm2 V−1, indicating their great potentials for gamma‐ray detection. Further, the fabricated detector based on Bi‐poor Cs2AgBiBr6SC shows response to 59.5 keV gamma‐ray with an energy resolution of 13.91%.more » « less
-
Abstract The removal of lead from commercialized perovskite‐oxide‐based piezoceramics has been a recent major topic in materials research owing to legislation in many countries. In this regard, Sn(II)‐perovskite oxides have garnered keen interest due to their predicted large spontaneous electric polarizations and isoelectronic nature for substitution of Pb(II) cations. However, they have not been considered synthesizable owing to their high metastability. Herein, the perovskite lead hafnate, i.e., PbHfO3in space groupPbam, is shown to react with SnClF at a low temperature of 300 °C, and resulting in the first complete Sn(II)‐for‐Pb(II) substitution, i.e. SnHfO3. During this topotactic transformation, a high purity and crystallinity is conserved withPbamsymmetry, as confirmed by X‐ray and electron diffraction, elemental analysis, and119Sn Mössbauer spectroscopy. In situ diffraction shows SnHfO3also possesses reversible phase transformations and is potentially polar between ≈130–200 °C. This so‐called ‘de‐leadification’ is thus shown to represent a highly useful strategy to fully remove lead from perovskite‐oxide‐based piezoceramics and opening the door to new explorations of polar and antipolar Sn(II)‐oxide materials.more » « less
