More Like this

1. Distal scaffold flexibility accelerates ligand substitution kinetics in manganese( i ) tricarbonyls: flexible thianthrene versus rigid anthracene scaffolds

   https://doi.org/10.1039/D2DT04048D  

   Labrecque, Jordan; Cho, Yae-In; McIntosh, Daniel K.; Agboola, Faridat; Rose, Michael J. (March 2023, Dalton Transactions)

   This work investigates the effect of molecular flexibility on fundamental ligand substitution kinetics in a pair of manganese( i ) carbonyls supported by scaffold-based ligands. In previous work, we reported that the planar and rigid, anthracene-based scaffold with two pyridine ‘arms’ ( Anth-py 2 , 2) serves as a bidentate, cis donor set, akin to a strained bipyridine (bpy). In the present work, we have installed a more flexible and dynamic scaffold in the form of thianthrene ( Thianth-py 2 , 1), wherein the scaffold in the free ligand exhibits a ∼130° dihedral angle in the solid state. Thianth-py 2 also exhibits greater flexibility (molecular motion) in solution compared with Anth-py 2 , as evidenced by longer 1 H NMR T 1 times Thianthy-py 2 ( T 1 = 2.97 s) versus Anth-py 2 ( T 1 = 1.91 s). Despite the exchange of rigid Anth-py2 for flexible Thianth-py2 in the complexes [( Anth-py 2 )Mn(CO) 3 Br] (4) and [( Thianth-py 2 )Mn(CO) 3 Br] (3), respectively, nearly identical electronic structures and electron densities were observed at the Mn center: the IR of 3 exhibits features at 2026, 1938 and 1900 cm −1 , nearly identical to the features of the anthracene-based congener (4) at 2027, 1936 and 1888 cm −1 . Most importantly, we assessed the effect of ligand-scaffold flexibility on reactivity and measured the rates of an elementary ligand substitution reaction. For ease of IR study, the corresponding halide-abstracted, nitrile-bound (PhCN) cations [( Thianth-py 2 )Mn(CO) 3 (PhCN)](BF 4 ) (6) and [( Anth-py 2 )Mn(CO) 3 (PhCN)](BF 4 ) (8) were generated in situ , and the PhCN → Br – back-reaction was monitored. The more flexible 3 (thianth-based) exhibited ∼3–4× faster ligand substitution kinetics ( k 25 C = 22 × 10 −2 min −1 , k 0 C = 43 × 10 −3 min −1 ) than the rigid analogue 4 (anth-based: ( k 25 C = 6.0 × 10 −2 min −1 , k 0 C = 9.0 × 10 −3 min −1 ) on all counts. Constrained angle DFT calculations revealed that despite large changes in the thianthrene scaffold dihedral angle, the bond metrics of 3 about the metal center remain unchanged; i.e. the ‘flapping’ motion is strictly a second coordination sphere effect. These results suggest that the local environment of molecular flexibility plays a key role in determining reactivity at the metal center, which has essential implications for understanding the reactivity of organometallic catalysts and metalloenzyme active sites. We propose that this molecular flexibility component of reactivity can be considered a thematic ‘third coordination sphere’ that dictates metal structure and function. 

   more » « less
2. Nitrogen-Doped Carbon Flowers with Fe and Ni Dual Metal Centers for Effective Electroreduction of Oxygen

   https://doi.org/10.3390/inorganics10030036  

   Mercado, Rene; Nichols, Forrest; Chen, Shaowei (March 2022, Inorganics)

   Carbon-based nanocomposites have been attracting extensive attention as high-performance catalysts in alkaline media towards the electrochemical reduction of oxygen. Herein, polyacrylonitrile nanoflowers are synthesized via a free-radical polymerization route and used as a structural scaffold and precursor, whereby controlled pyrolysis leads to the ready preparation of carbon nanocomposites (FeNi-NCF) doped with both metal (Fe and Ni) and nonmetal (N) elements. Transmission electron microscopy studies show that the FeNi-NCF composites retain the flower-like morphology, with the metal species atomically dispersed into the flaky carbon petals. Remarkably, despite a similar structure, elemental composition, and total metal content, the FeNi-NCF sample with a high Fe:Ni ratio exhibits an electrocatalytic performance towards oxygen reduction reaction (ORR) in alkaline media that is similar to that by commercial Pt/C, likely due to the Ni to Fe electron transfer that promotes the adsorption and eventual reduction of oxygen, as evidenced in X-ray photoelectron spectroscopic measurements. Results from this study underline the importance of the electronic properties of metal dopants in the manipulation of the ORR activity of carbon nanocomposites. 

   more » « less
3. Heterogeneous hydrogenation of phenylalkynes with parahydrogen: hyperpolarization, reaction selectivity, and kinetics

   https://doi.org/10.1039/c9cp02913c  

   Pokochueva, Ekaterina V.; Kovtunov, Kirill V.; Salnikov, Oleg G.; Gemeinhardt, Max E.; Kovtunova, Larisa M.; Bukhtiyarov, Valerii I.; Chekmenev, Eduard Y.; Goodson, Boyd M.; Koptyug, Igor V. (December 2019, Physical Chemistry Chemical Physics)

   Parahydrogen-induced polarization (PHIP) is a powerful technique for studying hydrogenation reactions in gas and liquid phases. Pairwise addition of parahydrogen to the hydrogenation substrate imparts nuclear spin order to reaction products, manifested as enhanced 1 H NMR signals from the nascent proton sites. Nanoscale metal catalysts immobilized on supports comprise a promising class of catalysts for producing PHIP effects; however, on such catalysts the percentage of substrates undergoing the pairwise addition route—a necessary condition for observing PHIP—is usually low. In this paper, we present a systematic study of several metal catalysts (Rh, Pt, Pd, and Ir) supported on TiO 2 in liquid-phase hydrogenation of different prototypical phenylalkynes (phenylacetylene, 1-phenyl-1-propyne, and 3-phenyl-1-propyne) with parahydrogen. Catalyst activity and selectivity were found to be affected by both the nature of the active metal and the percentage of metal loading. It was demonstrated that the optimal catalyst for production of hyperpolarized products is Rh/TiO 2 with 4 wt% metal loading, whereas Pd/TiO 2 provided the greatest selectivity for semihydrogenation of phenylalkynes. In a study of liquid-phase hydrogenation reaction kinetics, it was shown that reaction order with respect to hydrogen is nearly the same for pairwise and non-pairwise H 2 addition—consistent with a similar nature of the catalytically active sites for these reaction pathways. 

   more » « less
4. Oxidative dehydrogenation of propane over transition metal sulfides using sulfur as an alternative oxidant

   https://doi.org/10.1039/d0cy01039a  

   Arinaga, Allison M.; Liu, Shanfu; Marks, Tobin J. (October 2020, Catalysis Science & Technology)

   null (Ed.)

   The use of alternative oxidants for the oxidative dehydrogenation of propane (ODHP) is a promising strategy to suppress the facile overoxidation to CO x that occurs with O 2 . Gaseous disulfur (S 2 ) represents a thermodynamically “softer” oxidant that has been underexplored and yet offers a potential route to more selective propylene formation. Here we describe a system for sulfur-ODHP (SODHP). We demonstrate that various metal sulfide catalysts generate unique reaction product distributions, and that propylene selectivities as high as 86% can be achieved at 450–550 °C. For a group of 6 metal sulfide catalysts, apparent activation energies for propylene formation range from 72–134 kJ mol −1 and parallel the corresponding catalyst XPS sulfur binding energies, indicating that M–S bond strength plays a key role in SODHP activity. Kinetic data over a sulfided ZrO 2 catalyst indicate a rate law which is first-order in propane and zero-order in sulfur, suggesting that SODHP may occur via a mechanism analogous to the Mars van Krevelen cycle of traditional ODHP. The present results should motivate further studies of SODHP as a route to the selective and efficient oxidative production of propylene. 

   more » « less
5. Metal-Ligand Cooperativity in the Soluble Hydrogenase-1 from Pyrococcus Furiosus

   https://doi.org/10.1039/D0SC00628A  

   Vansuch, Gregory E.; Wu, Chang-Hao; Haja, Dominik K.; Blair, Soshawn A.; Chica, Bryant; Johnson, Michael; Adams, Michael W; Dyer, Richard Brian (January 2020, Chemical Science)

   Metal-ligand cooperativity is an essential feature of bioinorganic catalysis. The design principles of such cooperativity in metalloenzymes are underexplored, but are critical to understand for developing efficient catalysts designed with earth abundant metals for small molecule activation. The simple substrate requirements of reversible proton reduction by the [NiFe]-hydrogenases make them a model bioinorganic system. A highly conserved arginine residue (R355) directly above the exogenous ligand binding position of the [NiFe]-catalytic core is known to be essential for optimal function because mutation to a lysine results in lower catalytic rates. To expand on our studies of soluble hydrogenase-1 from Pyrococcus furiosus (Pf SH1), we investigated the role of R355 by site-directed-mutagenesis to a lysine (R355K) using infrared and electron paramagnetic resonance spectroscopic probes sensitive to active site redox and protonation events. It was found the mutation resulted in an altered ligand binding environment at the [NiFe] centre. A key observation was destabilization of the Nia3+-C state, which contains a bridging hydride. Instead the tautomeric Nia+-L states were observed. Overall, the results provided insight into complex metal-ligand cooperativity between the active site and protein scaffold that modulates the bridging hydride stability and the proton inventory, which should prove valuable to design principles for efficient bioinspired catalysts. 

   more » « less