More Like this

1. Dynamic covalent chemistry for architecture changing interpenetrated and single networks

   https://doi.org/10.1039/D1PY00198A  

   Wanasinghe, Shiwanka V.; Schreiber, Emily M.; Thompson, Adam M.; Sparks, Jessica L.; Konkolewicz, Dominik (January 2021, Polymer Chemistry)

   null (Ed.)

   Interpenetrating networks (IPN) comprise two or more networks which are woven but not covalently bonded to each other. This is in contrast to simple, or single Networks (SN), which contain only one network that is covalently crosslinked. This study develops SNs and IPNs using 2-hydroxyethyl acrylate as the monomer and (2-((1-(2-(acryloyloxy)ethyl)-2,5-dioxopyrrolidin-3-yl) thio)ethyl acrylate) (TMMDA) as a thermoresponsive dynamic thiol-Michael crosslinker. In the case of the IPN and SN materials the TMMDA is used as a thermoresponsive linker in each network, since TMMDA undergoes dynamic covalent exchange above 90 °C. In this way the SN and IPNs are kinetically trapped in their as synthesized structures until exposed to thermal stimulus. The focus of this study is to investigate how dynamic bond exchange can modulate material properties, after the material has been synthesized using the SN and IPN materials as model systems. The dynamic nature of the thiol-Michael crosslinker allows the transition of IPNs into SN like structures above 90 °C resulting in similar polymer architecture in both SN and IPN. Surprisingly, upon heating the SN materials also changed their mechanical properties, upon activation of the dynamic thiol-Michael bonds. This enhancement is proposed to occur by thermally activating the thiol-Michael bonds and reducing the number of floppy loops at higher temperature. 

   more » « less
2. Dual-dynamic interpenetrated networks tuned through macromolecular architecture

   https://doi.org/10.1039/C9PY01387C  

   Zhang, Borui; Ke, Jun; Vakil, Jafer R.; Cummings, Sean C.; Digby, Zachary A.; Sparks, Jessica L.; Ye, Zhijiang; Zanjani, Mehdi B.; Konkolewicz, Dominik (November 2019, Polymer Chemistry)

   Recent progress on stretchable, tough dual-dynamic polymer single networks (SN) and interpenetrated networks (IPN) has broadened the potential applications of dynamic polymers. However, the impact of macromolecular structure on the material mechanics remains poorly understood. Here, rapidly exchanging hydrogen bonds and thermoresponsive Diels–Alder bonds were included into molecularly engineered interpenetrated network materials. RAFT polymerization was used to make well-defined polymers with control over macromolecular architecture. The IPN materials were assessed by gel permeation chromatography, differential scanning calorimetry, tensile testing and rheology. The mechanical properties of these IPN materials can be tuned by varying the crosslinker content and chain length. All materials are elastic and have dynamic behavior at both ambient temperature and elevated temperature (90 °C), owing to the presence of the dual dynamic noncovalent and covalent bonds. 100% self-healing recovery was achieved and a maximum stress level of up to 6 MPa was obtained. The data suggested the material's healing properties are inversely proportional to the content of the crosslinker or the degree of polymerization at both room and elevated temperature. The thermoresponsive crosslinker restricted deformation to some extent in an ambient environment but gave excellent malleability upon heating. The underlying mechanism was explored by the computational simulations. Furthermore, a single network material with the same crosslinker content and degree of polymerization as the IPN was made. The SN was substantially weaker than the comparable IPN material. 

   more » « less
3. Actin filament alignment causes mechanical hysteresis in cross-linked networks

   https://doi.org/10.1039/D1SM00412C  

   Scheff, Danielle R.; Redford, Steven A.; Lorpaiboon, Chatipat; Majumdar, Sayantan; Dinner, Aaron R.; Gardel, Margaret L. (June 2021, Soft Matter)

   null (Ed.)

   Cells dynamically control their material properties through remodeling of the actin cytoskeleton, an assembly of cross-linked networks and bundles formed from the biopolymer actin. We recently found that cross-linked networks of actin filaments reconstituted in vitro can exhibit adaptive behavior and thus serve as a model system to understand the underlying mechanisms of mechanical adaptation of the cytoskeleton. In these networks, training, in the form of applied shear stress, can induce asymmetry in the nonlinear elasticity. Here, we explore control over this mechanical hysteresis by tuning the concentration and mechanical properties of cross-linking proteins in both experimental and simulated networks. We find that this effect depends on two conditions: the initial network must exhibit nonlinear strain stiffening, and filaments in the network must be able to reorient during training. Hysteresis depends strongly and non-monotonically on cross-linker concentration, with a peak at moderate concentrations. In contrast, at low concentrations, where the network does not strain stiffen, or at high concentrations, where filaments are less able to rearrange, there is little response to training. Additionally, we investigate the effect of changing cross-linker properties and find that longer or more flexible cross-linkers enhance hysteresis. Remarkably plotting hysteresis against alignment after training yields a single curve regardless of the physical properties or concentration of the cross-linkers. 

   more » « less
4. Accelerating dynamic exchange and self-healing using mechanical forces in crosslinked polymers

   https://doi.org/10.1039/C9MH01938C  

   De Alwis Watuthanthrige, Nethmi; Ahammed, Ballal; Dolan, Madison T.; Fang, Qinghua; Wu, Jian; Sparks, Jessica L.; Zanjani, Mehdi B.; Konkolewicz, Dominik; Ye, Zhijiang (June 2020, Materials Horizons)

   null (Ed.)

   Dynamically crosslinked polymers and their composites have tremendous potential in the development of the next round of advanced materials for aerospace, sensing, and tribological applications. These materials have self-healing properties, or the ability to recover from scratches and cuts. Applied forces can have a significant impact on the mechanical properties of non-dynamic systems. However, the impacts of forces on the self-healing ability of dynamically bonded systems are still poorly understood. Here, we used a combined computational and experimental approach to study the impact of mechanical forces on the self-healing of a model dynamic covalent crosslinked polymer system. Surprisingly, the mechanical history of the materials has a distinct impact on the observed recovery of the mechanical properties after the material is damaged. Higher compressive forces and sustained forces lead to greater self-healing, indicating that mechanical forces can promote dynamic chemistry. The atomistic details provided in molecular dynamics simulations are used to understand the mechanism with both non-covalent and dynamic covalent linkage responses to the external loading. Finite element analysis is performed to bridge the gap between experiments and simulations and to further explore the underlying mechanisms. The self-healing behavior of the crosslinked polymers is explained using reaction rate theory, with the applied force proposed to lower the energy barrier to bond exchange. Overall, our study provides fundamental understanding of how and why the self-healing of cross-linked polymers is affected by a compressive force and the force application time. 

   more » « less
5. C–H Functionalization of Polyolefins to Access Reprocessable Polyolefin Thermosets

   https://doi.org/10.1021/jacs.3c08682  

   Neidhart, Eliza K; Hua, Mutian; Peng, Zhengxing; Kearney, Logan T; Bhat, Vittal; Vashahi, Foad; Alexanian, Erik J; Sheiko, Sergei S; Wang, Cheng; Helms, Brett A; et al (December 2023, Journal of the American Chemical Society)

   Upcycling plastic waste into reprocessable materials with performance-advantaged properties would contribute to the development of a circular plastics economy. Here, we modify branched polyolefins and postconsumer polyethylene through a versatile C−H functionalization approach using thiosulfonates as a privileged radical group transfer functionality. Cross-linking the functionalized polyolefins with polytopic amines provided dynamically cross-linked polyolefin networks enabled by associative bond exchange of diketoenamine functionality. A combination of resonant soft X-ray scattering and grazing incidence X-ray scattering revealed hierarchical phase morphology in which diketoenamine-rich microdomains phase-separate within amorphous regions between polyolefin crystallites. The combination of dynamic covalent cross-links and microphase separation results in useful and improved mechanical properties, including a ∼4.5-fold increase in toughness, a reduction in creep deformation at temperatures relevant to use, and high-temperature structural stability compared to the parent polyolefin. The dynamic nature of diketoenamine cross-links provides stress relaxation at elevated temperatures, which enabled iterative reprocessing of the dynamic covalent polymer network with little cycle-to-cycle property fade. The ability to convert polyolefin waste into a reprocessable thermoformable material with attractive thermomechanical properties provides additional optionality for upcycling to enable future circularity. 

   more » « less