skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


  • NSF Public Access
  • Search Results
  • Stochastic modeling of spatially-dependent elastoplastic parameters in 316L stainless steel produced by direct energy deposition
Title: Stochastic modeling of spatially-dependent elastoplastic parameters in 316L stainless steel produced by direct energy deposition
The stochastic modeling and calibration of an anisotropic elasto-plastic model for additive manufacturing materials are addressed in this work. We specifically focus on 316L stainless steel, produced by directed energy deposition. Tensile specimens machined from two additive manufactured (AM) box-structures were used to characterize material anisotropy and random spatial variations in elasticity and plasticity material parameters. Tensile specimens were cut parallel (horizontal) and perpendicular (vertical) to the AM deposition plane and were indexed by location. These results show substantial variability in both regimes, with fluctuation levels that differ between specimens loaded in the parallel and perpendicular build directions. Stochastic representations for the stiffness and Hill’s criterion coefficients random fields are presented next. Information-theoretic models are derived within the class of translation random fields, with the aim of promoting identifiability with limited data. The approach allows for the constitutive models to be generated on arbitrary geometries, using the so- called stochastic partial differential approach (to sampling). These representations are then partially calibrated using the aforementioned experimental results, hence enabling subsequent propagation analyses. Sampling is finally exemplified on the considered structure.  more » « less
Award ID(s):
1942928
PAR ID:
10478897
Author(s) / Creator(s):
; ; ; ; ;
Publisher / Repository:
Elsevier
Date Published:
Journal Name:
Mechanics of Materials
Volume:
187
Issue:
C
ISSN:
0167-6636
Page Range / eLocation ID:
104821
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; (, Journal of materials processing technology)
    The aim of this study is to experimentally investigate the fatigue behavior of additively manufactured (AM) NiTi (i.e. Nitinol) specimens and compare the results to the wrought material. Additive manufacturing is a technique in which components are fabricated in a layer-by-layer additive process using a sliced CAD model based on the desired geometry. NiTi rods were fabricated in this study using Laser Engineered Net Shaping (LENS), a Direct Laser Deposition (DLD) AM technique. Due to the high plateau stress of the as-fabricated NiTi, all the AM specimens were heat-treated to reduce their plateau stress, close to the one for the wrought material. Two different heat treatment processes, resulting in different stress plateaus, were employed to be able to compare the results in stress- and strain-based fatigue analysis. Straincontrolled constant amplitude pulsating fatigue experiments were conducted on heat-treated AM NiTi specimens at room temperature (~24°C) to investigate their cyclic deformation and fatigue behavior. Fatigue lives of AM NiTi specimens were observed to be shorter than wrought material specifically in the high cycle fatigue regime. Fractography of the fracture surface of fatigue specimens using Scanning Electron Microscopy (SEM) revealed the presence of microstructural defects such as voids, resulting from entrapped gas or lack of fusion and serving as crack initiation sites, to be the main reason for the shorter fatigue lives of AM NiTi specimens. However, the maximum stress level found to be the most influential factor in the fatigue behavior of superelastic NiTi. 
    more » « less
  2. ; ; (, ASME International Mechanical Engineering Conference and Exposition)
    IMECE2022-88301 Additive manufacturing (AM) is transforming industrial production. AM can produce parts with complex geometries and functionality. However, one of the biggest challenges in the AM world is limited material options. The purpose of this research is to develop new material mixtures and determine their mechanical properties for use at the MSOE Rapid Prototyping Center and provide valuable insight into beta materials for use in AM industry. Elastomeric polyurethane (EPU 40) and Rigid polyurethane (RPU 70), resins developed by Carbon3D, are employed for this research. Initially, EPU 40 (100%) and RPU 70 (100%) were used to print tensile and hardness test specimens so that their mechanical properties could be compared to the standard values presented by Carbon3D and used as benchmarks for newly developed material. Mixtures of the two materials, EPU 40 and RPU 70, in multiple ratios were then created and used to print tensile and hardness test specimens. Data collected from tensile and hardness tests show that EPU 40 and RPU 70 can be combined in various ratios to obtain material properties that lie between the two individual components. In addition to developing these new materials, the effect of printing orientation on mechanical properties was also studied in this paper. 
    more » « less
  3. ; ; ; (, Scientific Data)
    Abstract Additive manufacturing (AM) is now widely used for research and industrial production. The benchmark data for mechanical properties of additively manufactured specimens is very useful for many communities. This data article presents a tensile testing dataset of ASTM D638 size specimens without and with embedded internal geometrical features printed using polylactic acid (PLA) in a Fused Filament Fabrication (FFF) additive manufacturing process. The added features can mimic defects of various shapes and sizes. This work is a supplement to the published research articleAssisted defect detection by in-process monitoring of additive manufacturing using optical imaging and infrared thermography(Additive Manufacturing, 2023, 103483). The printed specimens were tensile tested. Stress-strain graphs were developed and used to calculate the mechanical properties such as ultimate tensile strength (UTS) and strain at UTS. The mechanical properties, the correlations between mechanical properties and size, shape and location of geometrical features (defects), and the trends in mechanical properties can be useful in benchmarking the results of other researchers. 
    more » « less
  4. ; ; ; ; ; ; (, Micromachines)
    This work investigated material extrusion additive manufacturing (MatEx AM) of specialized fluoroelastomer (FKM) compounds for applications in rubber seals and gaskets. The influence of a commercially available perfluoropolyether (PFPE) plasticizer on the printability of a control FKM rubber compound was studied using a custom-designed ram material extruder, Additive Ram Material Extruder (ARME), for printing fully compounded thermoset elastomers. The plasticizer’s effectiveness was assessed based on its ability to address challenges such as high compound viscosity and post-print shrinkage, as well as its impact on interlayer adhesion. The addition of the PFPE plasticizer significantly reduced the FKM compound’s viscosity (by 70%) and post-print shrinkage (by 65%). While the addition of the plasticizer decreased the tensile strength of the control compound, specimens printed with the plasticized FKM retained 34% of the tensile strength of compression-molded samples, compared to only 23% for the unplasticized compound. Finally, the feasibility of seals and gaskets manufacturing using both conventional and unconventional additive manufacturing (AM) approaches was explored. A hybrid method combining AM and soft tooling for compression molding emerged as the optimal method for seal and gasket fabrication. 
    more » « less
  5. ; ; ; ; (, American Society of Mechanical Engineers)
    Abstract Fused deposition modeling (FMD) is considered one of the most common additive manufacturing methods for creating prototypes and small functional parts. Many researchers have studied Polylactic acid (PLA), Polycarbonate (PC), and Acrylonitrile butadiene styrene (ABS) as a material for fused deposition modeling printing. Among them, Polylactic Acid (PLA) is considered one of the most popular thermoplastic materials due to its low cost and biodegradable properties. In this study, silk PLA material was used. In Fused deposition modeling (FMD), the selection of printing parameters plays a pivotal role in determining the overall quality and integrity of the 3D-printed products. These parameters significantly influence the quality and strength of 3-D printed products. This study investigates the mechanical properties of silk-PLA printed specimens under different printing conditions, such as layer thickness, nozzle temperature, and print speed. All the tensile specimens were tested using ASTM D638 to characterize Young’s modulus and ultimate tensile strength. The thickness of the layers of tensile specimens was set to 0.1 mm, 0.15 mm, and 0.2 mm. The temperatures of the nozzle used during printing varied from 200°C, 210°C, and 220°C, whereas print speeds of 100 mm/s, 120 mm/s, and 140 mm/s were considered. The other printing parameters were kept consistent for all specimens. The result indicates tensile strength generally increases with increasing temperature of the nozzle, up to 220°C; however, a decline was observed in the average Young’s modulus value when the thickness of the layer increased from 0.10 mm to 0.20 mm. According to the results of the ANOVA analysis, the interaction between layer thickness, nozzle temperature, and printing speed significantly affects the tensile strength and Young’s modulus of Silk-PLA. This study reveals that nozzle temperature is the most critical parameter regarding the ultimate tensile strength and Young’s modulus, providing crucial insights for optimizing 3D printing parameters. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email