Lithium metal batteries (LMBs), especially “anode-free“ LMBs, promise much higher energy density than current lithium-ion batteries but suffer from poor capacity retention. While novel electrolytes have been designed to extend cycle life in anode free LMBs, most of them contain a high fraction of fluorinated solvents or diluents that may cause environmental concerns. Herein, we report the design and synthesis of a group of nonfluorinated ether solvents (termed xME solvents). By substituting the methyl terminal group of 1,2-dimethoxy ethane (DME) with different alkyl groups, the solvation power of xME solvents was tuned to be weaker, leading to more ion pairing in electrolyte solvation structure. In anode free type Cu/LiFePO4(Cu/LFP) cells, xME electrolytes in general show better capacity retention than DME-based electrolyte. Some xME electrolytes also show better oxidative stability than DME against aluminum and LiNi0.8Mn0.1Co0.1O2(NMC811) electrodes. While the general improvement in LMB cycle life and oxidative stability can be attributed to more ion pairing, the local variation within xME electrolytes indicates other factors are also important. Our work proposes a molecular design strategy to fine-tune ion solvation structure of nonfluorinated ether electrolytes for LMBs.
This content will become publicly available on January 23, 2025
Fluorination promotes lithium salt dissolution in borate esters for lithium metal batteries
Lithium metal batteries promise higher energy densities than current lithium-ion batteries but require novel electrolytes to extend their cycle life. Fluorinated solvents help stabilize the solid electrolyte interphase (SEI) with lithium metal, but are believed to have weaker solvation ability compared to their nonfluorinated counterparts and are deemed ‘poorer electrolytes’. In this work, we synthesize tris(2-fluoroethyl) borate (TFEB) as a new fluorinated borate ester solvent and show that TFEB unexpectedly has higher lithium salt solubility than its nonfluorinated counterpart (triethyl borate). Through experiments and simulations, we show that the partially fluorinated –CH2F group acts as the primary coordination site that promotes lithium salt dissolution. TFEB electrolyte has a higher lithium transference number and better rate capability compared to methoxy polyethyleneglycol borate esters reported in the literature. In addition, TFEB supports compact lithium deposition morphology, high lithium metal Coulombic efficiency, and stable cycling of lithium metal/LiFePO4 cells. This work ushers in a new electrolyte design paradigm where partially fluorinated moieties enable salt dissolution and can serve as primary ion coordination sites for next-generation electrolytes.
more »
« less
- PAR ID:
- 10487955
- Publisher / Repository:
- Royal Society of Chemistry
- Date Published:
- Journal Name:
- Journal of Materials Chemistry A
- Volume:
- 12
- Issue:
- 4
- ISSN:
- 2050-7488
- Page Range / eLocation ID:
- 2479 to 2490
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
-
Lithium-metal batteries (LMBs) are promising alternatives to state-of-the-art Lithium-ion batteries (LIBs) to achieve higher energy densities. However, the poor cyclability of LMBs resulting from Li metal anode (Li0) irreversibility and concomitant electrolyte decompositions limits their practical applications. In this study, we reported a per-fluorinated salt, lithium tetrakis(perfluoro-tertbutyloxy)borate (abbreviated as Li-TFOB) as an electrolyte additive for Li-metal batteries, which contains 36 F atoms per molecule. This newly designed ionic additive tuned the chemical composition of the solid-electrolyte interphase (SEI) on Li0 by increasing the amount of LiF and Li-B-O inorganic species. DFT calculations and Molecular dynamics (MD) simulations indicated the preferential reduction of the TFOB anions at Li0, which occurs with a lower free energy change than PF6anions. The designed ionic additive enables the 4.6 V Li||LiNi0.6Mn0.2Co0.2O2 (NMC622) cell to achieve an average CE of 99.1 % and a high-capacity retention of >50 % after 500 cycles. This experiment-simulation joint study illustrated an attractive approach to accelerating the design of electrolytes and interphases for LMBs.more » « less
-
In this study, the use of a closo-borate salt as an electrolyte for lithium-ion batteries (LIB) was evaluated in a series of solvent systems. The lithium closo-borate salts are a unique class of halogen-free salts that have the potential to offer some advantages over the halogenated salts currently employed in commercially available LIB due to their chemical and thermal stability. To evaluate this concept, three different solvent systems were prepared with a lithium closo-borate salt to make a liquid electrolyte (propylene carbonate, ethylene carbonate:dimethyl carbonate, and 1-Butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide). The closo-borate containing electrolytes were then compared by utilizing them with three different electroactive electrode materials. Their cycle stability and performance at various charge/discharge rates was also investigated. Based on the symmetrical cell and galvanostaic cycling studies it was determined that the carbonate based liquid electrolytes performed better than the ionic liquid electrolyte. This work demonstrates that halogen free closo-borate salts are interesting candidates and worthy of further investigation as lithium salts for LIB.more » « less
-
Carbonate-based electrolytes are widely used in Li-ion batteries but are limited by a small operating temperature window and poor cycling with silicon-containing graphitic anodes. The lack of non-carbonate electrolyte alternatives such as ether-based electrolytes is due to undesired solvent co-intercalation that occurs with graphitic anodes. Here, we show that fluoroethers are the first class of ether solvents to intrinsically support reversible lithium-ion intercalation into graphite without solvent co-intercalation at conventional salt concentrations. In full cells using a graphite anode, they enable 10-fold higher energy densities compared to conventional ethers, and better thermal stability over carbonate electrolytes (operation up to 60 °C) by producing a robust solvent-derived solid electrolyte interphase (SEI). As single-solvent–single-salt electrolytes, they remarkably outperform carbonate electrolytes with fluoroethylene carbonate (FEC) and vinylene carbonate (VC) additives when cycled with graphite–silicon composite anodes. Our molecular design strategy opens a new class of electrolytes that can enable next generation Li-ion batteries with higher energy density and a wider working temperature window.more » « less
-
more » « less
Abstract Achieving increased energy density under extreme operating conditions remains a major challenge in rechargeable batteries. Herein, we demonstrate an all‐fluorinated ester‐based electrolyte comprising partially fluorinated carboxylate and carbonate esters. This electrolyte exhibits temperature‐resilient physicochemical properties and moderate ion‐paired solvation, leading to a half solvent‐separated and half contact‐ion pair in a sole electrolyte. As a result, facile desolvation and preferential reduction of anions/fluorinated co‐solvents for LiF‐dominated interphases are achieved without compromising ionic conductivity (>1 mS cm−1even at −40 °C). These advantageous features were found to apply to both lithium metal and sulfur‐based electrodes even under extreme operating conditions, allowing stable cycling of Li || sulfurized polyacrylonitrile (SPAN) full cells with high SPAN loading (>3.5 mAh cm−2) and thin Li anode (50 μm) at −40, 23 and 50 °C. This work offers a promising path for designing temperature‐resilient electrolytes to support high energy density Li metal batteries operating in extreme conditions.
