skip to main content


Title: Computer vision based first floor elevation estimation from mobile LiDAR data
First Floor Elevation (FFE) of a house is crucial information for flood management and for accurately assessing the flood exposure risk of a property. However, the lack of reliable FFE data on a large geographic scale significantly limits efforts to mitigate flood risk, such as decision on elevating a property. The traditional method of collecting elevation data of a house relies on time-consuming and labor-intensive on-site inspections conducted by licensed surveyors or engineers. In this paper, we propose an automated and scalable method for extracting FFE from mobile LiDAR point cloud data. The fine-tuned yolov5 model is employed to detect doors, windows, and garage doors on the intensity-based projection of the point cloud, achieving an mAP@0.5:0.95 of 0.689. Subsequently, FFE is estimated using detected objects. We evaluated the Median Absolute Error (MAE) metric for the estimated FFE in Manville, Ventnor, and Longport, which resulted in values of 0.2 ft, 0.27 ft, and 0.24 ft, respectively. The availability of FFE data has the potential to provide valuable guidance for setting flood insurance premiums and facilitating benefit-cost analyses of buyout programs targeting residential buildings with a high flood risk.  more » « less
Award ID(s):
2103754
PAR ID:
10489340
Author(s) / Creator(s):
;
Publisher / Repository:
Elsevier
Date Published:
Journal Name:
Automation in Construction
Volume:
159
Issue:
C
ISSN:
0926-5805
Page Range / eLocation ID:
105258
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Flood mitigation governance is critical for coastal regions where flooding has caused considerable damage. Raising the First-Floor Elevation (FFE) above the base flood elevation (BFE) is an effective mitigation measure for buildings with a high risk of flooding. In the U.S., measuring FFE is necessary to obtain an Elevation Certificate (E.C.) for the National Flood Insurance Program (NFIP) and has traditionally required labor-consuming field surveys. However, the advances in computer vision technology have facilitated the handling of large image datasets, leading to new FFE measurement approaches. Taking Galveston Island (including the cities of Galveston and Jamaica Beach) in Coastal Texas as a case study, we explore how these new approaches may inform flood risk management and governance, including how FFE estimates may be combined with BFE estimates from flood inundation probability mapping to model the predicted cost of raising buildings’ FFE above their BFE. After establishing the FFE model’s accuracy by comparing its results with previously validated FFE estimates in three districts of Galveston, we generalize the workflow to building footprints across Galveston Island. By combining the FFE data derived from our workflow with multidimensional building information, we further analyze the future flood control and post-disaster maintenance strategies. Our findings present valuable data collection paradigms and methodological concepts that inform flood governance for Galveston Island. The proposed workflow can be extended to flood management and research for other vulnerable coastal communities.

     
    more » « less
  2. null (Ed.)
    Abstract. High-resolution remote sensing imagery has been increasingly used for flood applications. Different methods have been proposed for flood extent mapping from creating water index to image classification from high-resolution data. Among these methods, deep learning methods have shown promising results for flood extent extraction; however, these two-dimensional (2D) image classification methods cannot directly provide water level measurements. This paper presents an integrated approach to extract the flood extent in three-dimensional (3D) from UAV data by integrating 2D deep learning-based flood map and 3D cloud point extracted from a Structure from Motion (SFM) method. We fine-tuned a pretrained Visual Geometry Group 16 (VGG-16) based fully convolutional model to create a 2D inundation map. The 2D classified map was overlaid on the SfM-based 3D point cloud to create a 3D flood map. The floodwater depth was estimated by subtracting a pre-flood Digital Elevation Model (DEM) from the SfM-based DEM. The results show that the proposed method is efficient in creating a 3D flood extent map to support emergency response and recovery activates during a flood event. 
    more » « less
  3. Taylor, Mark P. (Ed.)
    A widely adopted measure of housing affordability is that households should spend no more than 30% of their household income on housing. However, this normative threshold is an arbitrary Great Depression-era guideline and may not be relevant today. This paper proposes a subjective indicator of housing affordability by introducing a method commonly used in the medical sciences. It utilizes discrete information to estimate a subjective affordability ratio that discriminates between subjective house-poor and non-house-poor households. We apply the proposed method to household-level data collected in Selangor, Malaysia, and show that the optimal cut-off point is 23.5%. This estimated value suggests a higher prevalence of house-poor households than is implied by the regularly assumed 30% threshold. In addition, we perform a sensitivity analysis and find the bias in the estimated cut-off point is close to zero. 
    more » « less
  4. Any entity offering flood insurance, whether it is private or government‐administered such as the National Flood Insurance Program (NFIP), faces the challenge of solvency. This is especially true for the NFIP, where homeowner affordability criteria limit the opportunity to charge fully risk‐based premiums. One solution is to remove the highest flood risk properties from the insurer's book of business. Acquisition (buyout) of flood‐prone structures is a potentially permanent solution that eliminates the highest risk properties while providing homeowners with financial assistance to relocate in a less risky location. To encourage participation, homeowners are offered a preflood fair market value of their damaged (or at risk of damage) structures. Although many factors have been shown to affect a homeowner's decision to accept an acquisition offer, very little research has been devoted to the influence of price or monetary incentive offered on homeowners' willingness to participate in acquisition programs. We estimate a pooled probit model and employ a bootstrap methodology to determine the effects of hypothetical home price offers on homeowners' acquisition decisions. We do so while controlling for environmental factors, property characteristics, and homeowner sociodemographic characteristics. Results show that price indeed has a positive effect on likelihood of accepting an acquisition contract. Furthermore, estimated homeowner supply curves differ significantly based on the damage status of the acquisition offer, as well as homeowner and property characteristics.

     
    more » « less
  5. null (Ed.)
    Flood occurrence is increasing due to the expansion of urbanization and extreme weather like hurricanes; hence, research on methods of inundation monitoring and mapping has increased to reduce the severe impacts of flood disasters. This research studies and compares two methods for inundation depth estimation using UAV images and topographic data. The methods consist of three main stages: (1) extracting flooded areas and create 2D inundation polygons using deep learning; (2) reconstructing 3D water surface using the polygons and topographic data; and (3) deriving a water depth map using the 3D reconstructed water surface and a pre-flood DEM. The two methods are different at reconstructing the 3D water surface (stage 2). The first method uses structure from motion (SfM) for creating a point cloud of the area from overlapping UAV images, and the water polygons resulted from stage 1 is applied for water point cloud classification. While the second method reconstructs the water surface by intersecting the water polygons and a pre-flood DEM created using the pre-flood LiDAR data. We evaluate the proposed methods for inundation depth mapping over the Town of Princeville during a flooding event during Hurricane Matthew. The methods are compared and validated using the USGS gauge water level data acquired during the flood event. The RMSEs for water depth using the SfM method and integrated method based on deep learning and DEM were 0.34m and 0.26m, respectively. 
    more » « less